• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.10
• /
• pp.687-692
• /
• 1999

A new technique to measure low level capacitance variations of the gyroscope is proposed and verified by computer simulation. It is based on the new CV(capacitance-voltage) converter circuit biased by dc current source and the peak detector without low pass filter. The CV converter biased by dc current source provides good signal-to-noise ratio and this setup of the detection circuitry without low pass filter makes it possible to provide short settling time, that is, higher speed of measurement and wide operation range if only a few parameters are adjusted. The key parameters that affect the performance of the detection circuitry are illustrated and computer simulation results are presented. The demonstrated detection circuitry shows linear response from 10 fF to 130 fF at 10 kHz and shows good linearity.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.49 no.3
• /
• pp.161-164
• /
• 2000

A simple methode for calculating the forward voltage drop of IGBTs is presented, on the voltage drops on the p+ body, the reverse biased depletion region between p+body and epi-layer, the epi layer, and the forward biased collector junction. The decrease of the total current density in the epi layer near the p+ body is taken into account. The proposed methode allows a simple but accurate determination of the forward voltage drop in IGBTs, avoiding the complex path taken in the previous model for the forward voltage drops on channel, accumulation region, and epi region. Numerical simulations for 1kV NPT-IGBT with a uniformly doped collector are shown to support the analytical results.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.225-235
• /
• 2008

It is expected that the change of industrial structure of Knowledge based economy, and service based economy would affect on economic life of physically-challenged person with no exceptions. There have been some former studies which have been misunderstood the employment of disabled due to the declining employment of the disabled and prejudice to the disabled based on biased perspective and public opinion. This study have analyzed the employment conditions of the ordinary workers and disabled workers out of those prejudices and biased opinions. Wage, economic activity ratio, age, educational background and industry those 5 parameters are brought for analyzing the two comparison group. Each parameter have compared based on the statistical data of ordinary workers and disabled workers for past 7 years. Weight between each parameter have been drawn by collecting the experts' opinion using AHP(Analytic Hierarchy Process), and utility of employment of two comparison groups have been estimated through progress inclination of each parameter. Through the estimated outcome, present condition and controversial issues and way of improvement of domestic employment of ordinary workers and the disabled is mentioned.

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.146-148
• /
• 2001

LIGBT의 캐소드에 전류 제한 능력이 있는 LDMOS를 직렬 연결하여 LIGBT의 전류가 기생 사이리스터가 동작하게 되는 지점까지 증가하는 것을 억제함으로써 기생 사이리스터의 동작으로 인한 LIGBT의 불안정 동작 효과적으로 방지하는 새로운 구조의 LIGBT를 제안한다. 또한 턴-오프 시에 LDMOS의 전류 차단 능력에 의해 전류가 기존의 소자에 비해 빠르게 감소하는 효과로 인해 빠른 스위칭 속도를 얻을 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.286-286
• /
• 2009

According to previous report, aged sleeves for old transmission lines have various defect such as biased installation or corrosion of steel sleeve. These defects can cause serious accidents such as rapid increasing of sag or falling out of overhead conductor from sleeves. Moreover, the defects have been limited power capacity of transmission line. This paper study on mechanical and thermal behavior of ACSR $410mm^2$ conductor and sleeve with various defect model. The conductor has been aged artificially for 50 years. The detailed results were presented in the text.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.7-10
• /
• 2000

Studies of prosody and sentence processing have demonstrated that prosodic phrasing can exhibit strong effects on processing decisions in English. In this paper, we tested Korean sentence fragments containing syntactically ambiguous Adj-N1-N2 strings in a cross-modal naming task. Four accentual phrasing patterns were tested: (a) the default phrasing pattern, in which each word forms an accentual phrase; (b) a phrasing biased toward N1 modification; (c) a phrasing biased toward complex-NP modification; and (d) a phrasing used with adjective focus. Patterns (b) and (c) are disambiguating phrasings; the other two are commonly found with both interpretations and are thus ambiguous. The results showed that the naming time of items produced in the prosody contradicting the semantic grouping is significantly longer than that produced in either default or supporting prosody, We claim that, as in English, prosodic information in Korean is parsed into a well-formed prosodic representation during the early stages of processing. The partially constructed prosodic representation produces incremental effects on syntactic and semantic processing decisions and is retained in memory to influence reanalysis decisions.

• Communications for Statistical Applications and Methods
• /
• v.24 no.3
• /
• pp.291-301
• /
• 2017

It is well known in a small sample that the maximum likelihood (ML) approach for variance components in the general linear model yields estimates that are biased downward. The ML estimate of residual variance tends to be downwardly biased. The underestimation of residual variance, which has implications for the estimation of marginal effects and asymptotic standard error of estimates, seems to be more serious in some limited dependent variable models, as shown by some researchers. An alternative frequentist's approach may be restricted or residual maximum likelihood (REML), which accounts for the loss in degrees of freedom and gives an unbiased estimate of residual variance. In this situation, the REML estimator is derived in a censored regression model. A small sample the REML is shown to provide proper inference on regression coefficients.

• Journal of Sensor Science and Technology
• /
• v.20 no.5
• /
• pp.322-328
• /
• 2011

There are many ways to detect the heart rate non-invasively such as ECG, PPG, strain gauge, and pressure sensor. In this paper, the pulse wave measurement system using bipolar biased head on mode of the Hall sensor is proposed for measuring the radial artery pulse. TMS320F2812 was used to implement the proposed system and a portable wireless network(zig-bee) was used to show the experimental result. It was confirmed from experiment that the performance of the implemented system was more stable and faster than PPG sensor or piezoelectric film pressure sensor.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1736-1737
• /
• 2011

This paper deals with the problem of precise impact angle control of an actual homing missile guided by biased proportional navigation (BPN). To do this, the BPN guidance loop including dynamic lag is modeled as the confluent hyper-geometric differential equation and its analytic solution is derived. Based on the solution, a systematic way to determine the bias constant is newly devised. Different from the existing BPN solution obtained by ignoring the dynamic lag, the proposed one can exactly describe the behavior missile before target interception. hence it is drastically improved the angle constrained terminal guidance performance.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1580-1581
• /
• 2011

The linear accelerator of Pohang Accelerator Laboratory(PAL) will drive a top-up mode operation in PLS-II(Pohang Light Source-II). Due to this kind of the operation mode, the electron gun is expected to have shorter life time of the cathode. Further in the PLS-II, two gate valves will be installed in front of the electron gun. The distance between the pre-bunching section and the electron gun will increase by 400 mm compared to the existing system due to the insertion of these gate valves. As a result the incident electron beam. One of the goals to improve the beam pulse width is by incorporating suitable biased voltage. In this paper, we will present test results of beam pulse width as a function of different biased voltage and focusing solenoid coil.