• 복식문화연구
• /
• 제17권3호
• /
• pp.396-406
• /
• 2009

Drapery costume started with using one fabric to loosely wrap around one's body without using technical skills or needlework. Drapery becomes a beautiful and indeterminate form of pleated costume which determines the costume silhouette and serves as an essential component for the composition of artistic costume. The purpose of this study was to examine the aesthetic characteristics of drapery costume using literature review. The study methods include considerations of the formation process of drapery costume with the analysis of costume in pictures. For modern costume designs, the study analyzed the designer's dress with a focus on drapery forms, which appeared in the collections from 2001 to 2007. First, drapery costume contains the beauty of human body. Drapery costume reveals the smallest movement of the body. The beauty of drapes, which is naturally revealed along the curve of the body, and the pleats which form on the soft cloth create the beauty of body. Second, drapery costume has rhythmical beauty. Drapery pleats feature not only functions, but also unique formativeness that provides rhythmicity and regular or irregular direction effects by line. Third, drapery costume features elegant beauty. Bias cutting by draping can effectively express the elegant characteristics of the fabric. In making a piece of clothing, the composition method can express elegant beauty by covering up the shortcomings of the fitting and by fitting to the body line without cutting the fabric, or fitting it by bias cutting.

• 한국표면공학회지
• /
• 제54권3호
• /
• pp.133-138
• /
• 2021

Ternary Ti-X-N coatings, where X = Al, Si, Cr, O, etc., have been widely used for machining tools and cutting tools such as inserts, end-mills, and etc. Ti-Al-N-O coatings were deposited onto silicon wafer and WC-Co substrates by a cathodic arc evaporation (CAE) technique at various negative substrate bias voltages. In this study, the influence of substrate bias voltages during deposition on the microstructure and mechanical properties of Ti-Al-N-O coatings were systematically investigated to optimize the CAE deposition condition. Based on results from various analyses, the Ti-Al-N-O coatings prepared at substrate bias voltage of -80 V in the process exhibited excellent mechanical properties with a higher compressive residual stress. The Ti-Al-N-O (-80 V) coating exhibited the highest hardness around 30 GPa and elastic modulus around 303 GPa. The improvement of mechanical properties with optimized bias voltage of -80 V can be explained with the diminution of macroparticles, film densification and residual stress induced by ion bombardment effect. However, the increasing bias voltage above -80 V caused reduction in film deposition rate in the Ti-Al-N-O coatings due to re-sputtering and ion bombardment phenomenon.

• 한국표면공학회지
• /
• 제35권2호
• /
• pp.122-128
• /
• 2002

This study was conducted to synthesize the diamond like carbon films by plasma enhanced chemical vapor deposition (PECVD). The effects of gas composition on growth and mechanical properties of the films were investigated. A little amount of hydrogen or oxygen were added to base gas mixture of methane and argon. Methane dissociation and diamond like carbon nucleation were enhanced by installing negatively bias grid near substrate. The deposited films were indentified as hard diamond like carbon films by micro-Raman spectroscopy. The surface and fractured cross section of the films which were observed by scanning electron microscopy showed that film growth is very slow as about 0.3$\mu\textrm{m}$/hour, and relatively uniform with hydrogen addition. Vickers hardness of tungsten carbide (WC) cutting tool increased from about 1000 to 1600~1800 by deposition of DLC film, that of commercial TiN coated tool was about 1270. In cutting test of aluminum 6061 alloy, DLC coated cutting tool showed 1/3 or lower crater and flank wear than TiN coated or non-coated WC cutting tools.

• 한국의류산업학회지
• /
• 제6권4호
• /
• pp.497-502
• /
• 2004

The mechanical properties of jean slacks to the type of cutting lines in knee region and the bending time, after doing bending 0 times, 500 times, and 1500 times, the effects of whether or not cutting line, the fabric direction of the cutting area, and the number of cutting lines were investigated for tensile, shearing, compression, and mixing value of mechanical properties. The results are as follows: EM to bending times were larger in order of weft

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2007년도 추계학술대회 논문집
• /
• pp.136-137
• /
• 2007

Wear resistant TiAlN thin film has been widely deposited on the surface of cutting and forming tools by using Arc Ion Plating. TiAlN films are deposited by the processes designed by the Taguchi L18 experimental design. The L18 experimental design is applied to achieve surface properties and adhesion. The deposition parameters are working pressure, substrate temperature, bias voltage, arc power and pre-sputtering bias voltage and time. The most influential parameters on surface properties and adhesion are substrate bias voltage, working nitrogen pressure and arc power. The optimal coating processes are obtained for surface properties and adhesion.

• 한국정밀공학회지
• /
• 제29권11호
• /
• pp.1214-1220
• /
• 2012

Vibration assisted cutting (VAC) is one of the promising methods for precision machining, which has been normally equipped with piezoelectric materials. In this paper, a feasibility of applying magnetostrictive materials to VAC as a cutting device instead of piezoelectric materials was studied. For this, the vibrational characteristics of a magnetostrictive material was investigated with respect to a coil design, a preload, and the effects of a biasing and an exciting magnetic fields. The output strain of a magnetostrictive material is restricted due to an increasing inductive impedance as the exciting frequency increases and the heat of coil, etc. Through the experimental results, it was found that the biasing and the exciting magnetic field affected the output performance significantly but not the preload. In conclusion, the magnetostrictive material could be used only in the low frequency range but not a good candidate for high frequency actuating application.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.269-275
• /
• 2005

This article describes the development on a new style active hybrid bearing system including both merits of an aerostatic bearing system and a magnetic bearing system. The developed active hybrid bearing system has several advantages: exact rotation, robust controller against the variation of a disturbance, improvement of stiffness and a damper of the system at a high-speed operation, and constraints of the heat generated by a bias current. In order to measure a rotating error due to the change of a cutting force and the variation of a system parameter, a CCS (Cylindrical Capacity displacement Sensor) was used.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2003년도 춘계학술대회 논문집
• /
• pp.19-22
• /
• 2003

경사의 사선방향으로 절단하여 봉제된 바이어 컷 직물로 제조된 의류는 일반 의류와 달리 우아한 외관을 타나낸다. 이 직물의 단점은 형태안정성이 나빠서 완전제품의 형태가 패턴의 형의 형태와 다른 모양을 나타내는 경우가 많으며, 특히 밑단 부분이 불균일하게 쳐지므로, 가지런히 절단하는 트리밍공정을 부가적으로 거치게 된다. 현재의 봉제 공정에서는 트리밍 단계를 모두 숙련공들의 수작업에 의존한 평면 커팅 방법으로 수행하기 때문에 작업자의 피로도에 따라 불량품이 양산되고 그에 따른 소비자들의 불만 요인도 높아지므로, 본 연구에서는 치수 조절 마네킹을 제조하여 실제 의복 착용 상태를 그대로 재현 한 후, 회전시키면서 스스로 회전하는 자동 커터에 의해서 공간상에서 트리밍 하는 3-D 입체 시스템을 개발하였다. 이 시스템에 의하여 제조된 의류는 트리밍 라인이 균일하고 매끄러우며, 안감이 밖으로 밀려나오는 경우가 없어 외관상 품위가 있는 외관을 나타내었다. 또한 수작업에 비하여 제조 속도가 훨씬 빠르므로 봉제 후공정에서의 의류 제조 시간을 획기적으로 단축하는 신속 생산 시스템의 요소로서 충분히 사용될 수 있는 가능성을 나타낸다.

• 대한전자공학회논문지TE
• /
• 제39권2호
• /
• pp.29-33
• /
• 2002

수소화된 p형 Si(100)표면에 대기중에서 작동하는 주사형 터널링 현미경(scanning tunneling microscopy-STM)을 이용하여 미세구조를 제작하였다. 시료의 표면처리는 HF 용액에 1분간 담가 수소화하였다. STM의 탐침은 백금합금을 역학적인 방법으로 45$^{\circ}$로 잘라서 사용하였다. STM의 바이어스 전압을 변화시켜가며 미세구조를 제작하였다. 최적의 미세구조 선폭은 30 nm이고 이 때의 바이어스 전압은 1.7V, 터널링 전류는 1nA였다.

• Tribology and Lubricants
• /
• 제20권3호
• /
• pp.125-131
• /
• 2004

Nano-wear behavior of amorphous carbon films was studied by Atomic Force Microscopy. The a-C films are deposited on Si(100) substrate by DC magnetron sputtering method. The influences of different surface roughness on the nano-wear are investigated. Nano-wear tests were carried out using a very sharp diamond coated tip. Its spring constant was 1.6 N/m and radius of curvature was 110 nm. Normal force used in the wear tests ranged 0 to 400 nN. It was found that surface depression occurred during scratching because of plastic deformation and abrasive wear (cutting St ploughing). Wear depth increased linearly with normal force. Changing the surface roughness variables according to the bias pulse control, the less surface roughness decreased the wear depth. The thickness did not affect the wear resistance.