• Korea Trade Review
• /
• v.47 no.4
• /
• pp.161-176
• /
• 2022

Most companies are achieving economic benefits by producing products in the form of bi-national products, but there are also negative consequences such as reduced brand power, so strategic bi-national product planning and branding is essential. In order to actively reflect these practical needs, this study conducted a comprehensive and easy-to-generalize evaluation of Bi-national products that has been somewhat underdeveloped in previous studies. To this end, the selection and evaluation criteria of the products to be investigated were differentiated. This is to classify the products by place of use and the purpose of use so that the majority of bi-national products can be included, and then use the combination to derive the specific products to be evaluated for bi-national products. The evaluation of the product identified the phenomenon of psychological conflict among consumers due to the country of origin discrepancy at the level of decreasing brand authenticity. The above research design is an evaluation method that can encompass bi-national products as a whole, rather than an evaluation of a specific product or product line that is mainly reported in previous studies, and it is also very easy to apply to practice because it allows us to more carefully identify changes in psychological attitudes.

• Korea Trade Review
• /
• v.43 no.5
• /
• pp.67-91
• /
• 2018

A number of studies have been conducted on the evaluation of bi-national products, but studies that may be applied in practice are lacking. This study suggests several implications for bi-national products in the sub-market using a more specific approach than previous studies. To this end, this comprehensive comparative study reflects the purchasing routes, product category, and consumers' personal characteristics (regulatory focus, prior knowledge) of bi-national products. Results found the evaluation of bi-national products according to purchase routes showed that consumers in offline stores were more favorable than consumers in online stores. In comparison with product categories, necessities were more positive than luxury goods. On the other hand, according to consumer's personal characteristics, consumers with promotion focus tendency perceived brand preference more highly than consumers with preference focus tendency. Also, it was found that groups with high prior knowledge had a positive evaluation of products compared to low knowledge groups.

• International Commerce and Information Review
• /
• v.18 no.2
• /
• pp.169-194
• /
• 2016

This study aims to explain the cause of price differences of bi-national products based on consumer response of product type, distribution channel, and consumer nationality, respectively. Specifically this study investigated whether price discount and distribution channel affect consumer evaluation by luxury and non-luxury product type. In the case of bi-national product toward the non-luxury, price discount had positive influence on preference, regardless of distribution channel. By revealing the influence of price discount on bi-national products on consumer response of product type and distribution channel respectively, the study suggests meaningful implications for the strategic management of bi-national products.

• Journal of the Korean Society of Costume
• /
• v.59 no.6
• /
• pp.41-57
• /
• 2009

Evaluations of fashion products are often influenced by consumers' knowledge of the country where the products were made in. As globalization progresses, country-of-origin information is widely regarded as a powerful cue on consumers' shopping behavior. The purpose of study was to examine the consumer evaluation of apparel products with uni-national or bi-national country of origin. The effect of price level and gender were also investigated. The empirical research design took 2${\times}$2 factorial design with the country-of-origin coincidence (uni-national vs. bi-national) and price (high vs. low) of gender (male vs. female). Consumers' ethnocentrism and country-of-origin interest were taken into account as covariates in the factorial design. The consumers' evaluation of fashion products was measured in terms of brand attitudes and product attitudes. Data from 514 respondents were analyzed with t-test, one-way ANOVA, two-way ANOVA, and ANCOVA. Results of this study affirmed the importance of price information rather than country-of-origin coincidence in brand attitudes and product attitudes. Only for male consumers, interaction effects of price and country-of-origin coincidence had significant eflects on utilitarian attitude. Effects of two covariate variables included in the study were significant for female respondents but not for male respondents.

• Honam Mathematical Journal
• /
• v.36 no.2
• /
• pp.275-289
• /
• 2014

We study matrix forms whose determinants are easily computable. We give various forms of square matrices whose determinants are products of linear factors related with their entries.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.2
• /
• pp.61-66
• /
• 2012

Bismuth(Bi) nanoparticles were synthesized at room temperature by a modified polyol process using bismuth(III) carbonate basic as precursor. In addition, some characteristics of the synthesis with respect to the exchange of a capping agent/surface stabilizer and solvent type were observed. When polyvinylpyrroldone was added, the finest Bi nanoparticles were synthesized in diethylene glycol(DEG), while the coarsest nanoparticles were formed in polyethylene glycol(PEG). The particle size immediately after synthesis was proportionate to final particle size which was determined by particle growth through coalescence and aggregation during drying. As a result, the finest Bi particles with the diameter range of several tens of nanometers - 300 nm were finally obtained in DEG. Regardless of the type of capping agent/surface stabilizer, extensive coalescence and aggregation behavior occurred in PEG, resulting in final products agglomerated with coarse particles.

• Journal of the Korean association of regional geographers
• /
• v.17 no.6
• /
• pp.753-765
• /
• 2011

Tourist behavior has been a major topic in tourism research. Since the construction of Saemangeum seawall, May 2010, it has been working actively to make a tourist complex fishing port project of Bi-eung port, with the increase of tourists visiting to Saemangeum seawall and Bi-eung port. The purpose of this study is to analyze tourist behaviors conducted in Bi-eung port of Gunsan area. Most of the tourists were the residence of the Jeonbuk, and one-day tourists mostly consisted of families and friends. It was examined that the main destinations were Saemangeum seawall and Bi-eung port. The major complaints of tourists were the lack of parking and convenience facilities. In order to activate the tourism of Bi-eung port, it is required the landscape maintenance and place marketing of Bi-eung port. The satisfaction indicators about tourism base on facilities such as accessibility, promotion and information, tourism products and food, linkage of tourist places and tourism resource with surrounding areas, and the related tourism programs show as below average, respectively. Seven kinds of tourism infrastructure as measured by indicators below average in satisfaction with the analysis but Comprehensive assessment as a tourist destination was the relatively high levels.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.3
• /
• pp.15-22
• /
• 2023

BNKT Ceramics, one of the representative Pb free based piezoelectric ceramics, constitutes a perovskite(ABO3) structure. At this time, the perovskite structure (ABO3) is in the form where the corners of the octahedrons are connected, and in the unit cell, two ions, A and B, are cations, A ion is located at the body center, B ion is located at each corner, and an anion O is located at the center of each side. Since Bi, Na, and K sources constituting the A site are highly volatile at a sintering temperature of 1100℃ or higher, it is difficult to maintain uniformity of the composition. In order to solve this problem, there should be suppression of volatilization of the A site material or additional compensation of the volatilized. In this study, the basic composition of BNKT Ceramics was set to Bi_0.5(Na_0.78K_0.22)_0.5TiO₃ (= BNKT), and volatile site (Bi, Na, and K sources) were coated in the form of a shell to compensate additionally for the A site ions. In addition, the physical and electrical properties of BNKT and its coated with shell additives(= @BNK) were compared and analyzed, respectively. As a result of analyzing the crystal structure through XRD, both BNKT(Core) and @BNK(Shell) had perovskite phases, and the crystallinity was almost similar. Although the Curie temperature of the two sintered bodies was almost the same (TC = 290 ~ 300 ℃), it was confirmed that the d33 (piezoelectric coefficient) and Pr (residual polarization) values were different. The experimental results indicated that the additional compensation for a shell additive causes the coarsening, resulting in a decrease in sintering density and Pr(remanent polarization). However, coating shell additives to compensate for A site ion is an effective way to suppress volatilization. Based on these experimental results, it would be the biggest advantage to develop an eco-friendly material (Lead-free) that replaced lead (Pb), which is harmful to the human body. This lead-free piezoelectric material can be applied to a biomedical device or products(ex. earphones (hearing aids), heart rate monitors, ultrasonic vibrators, etc.) and skin beauty improvement products (mask packs for whitening and wrinkle improvement).

• Conservation Science in Museum
• /
• v.10
• /
• pp.1-13
• /
• 2009

A part of the bronze bell from Goryeo (918-1392) in the collection of Buyeo National Museum was missing, and it was noted to retain corrosion products and burial accretions. Chemical analysis showed that the chemical composition of the bronze bell is Cu (74.18%), Sn (9.58%), Pb (15.77%), and very small amounts of As, Fe, Sb, Bi, and Ag. It was noted that the microstructure of the bronze bell was mainly made up of α phase and α+δ eutectoid phase, and gray (S) and black (Pb segregation) prevailed. Conservation treatment has been done for the preservation of this bronze bell.

• Transactions of Materials Processing
• /
• v.31 no.6
• /
• pp.344-350
• /
• 2022

Extruded Mg-Bi binary alloys are known to have an undesirable bimodal grain structure containing a large amount of coarse unrecrystallized grains. Accordingly, to improve the microstructural homogeneity of extruded Mg-Bi alloys, it is necessary to promote the dynamic recrystallization (DRX) behavior during hot extrusion. An effective way to promote DRX is an increase in nucleation sites for DRX through a pre-deformation process before extrusion, such as cold pre-forging and hot pre-compression. However, the application of these pre-deformation processes increases the cost of final extruded Mg products because of an increase in energy consumption and decrease in productivity. Therefore, a low-cost new continuous process with high productivity is required to improve the microstructural homogeneity and mechanical properties of extruded Mg alloys without a drastic increase in the entire process cost. This study proposes a new extrusion method using an extrusion billet with a truncated cone shape (i.e., tapered billet) instead of a conventional extrusion billet with a cylindrical shape. When the hot extrusion of a Mg-5Bi alloy is conducted using the tapered billet, the DRX behavior during extrusion is considerably promoted. The DRX fraction and average grain size of the extruded alloy significantly increase and decrease from 65% to 91% and from 225 ㎛ to 49 ㎛, respectively. Consequently, the extruded Mg-5Bi alloy fabricated using the tapered billet has a finer homogeneous grain structure and higher tensile elongation than the extruded counterpart fabricated using the cylindrical billet.