• Journal of Korean Society of Steel Construction
• /
• v.25 no.2
• /
• pp.115-130
• /
• 2013

In this study, lateral-torsional buckling (LTB) strength of high-strength H-beams built up from 800MPa tensile-strength steel was experimentally and analytically evaluated according to current lateral stability provisions (KBC 2009, AISC-LRFD 2010). The motivation was to evaluate whether or not current LTB provisions, which were originally developed for ordinary steel with different stress-strain characteristics, are still applicable to high-strength steel. Two sets of compact-section specimens with relatively low (Set A) or high (Set B) warping stiffness were prepared and tested under uniform moment loading. Laterally unbraced lengths of the test specimens were controlled such that inelastic LTB could be induced. All specimens exhibited LTB strength exceeding the minimum limit required by current provisions by a sufficient margin. Moreover, some specimen in Set A reached a rotation capacity required for plastic design, although its laterally unbraced length belonged to the inelastic LTB range. All the test results indicated that extrapolation of current provisions to high-strength steel is conservative. In order to further analyze the test results, the relationship between inelastic moment and laterally unbraced length was also derived in explicit form for both ordinary- and high-strength steel based on the effective tangent modulus of inelastic section. The analytical relationship derived again showed that extrapolation of current laterally unbraced length limit leads to a conservative design in the case of high-strength steel and that the laterally unbraced length to control the inelastic LTB behavior of high-strength steel beam should be specified by including its unique post-yield strain-hardening characteristics.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.90-104
• /
• 2019

In this study, CALPUFF modeling was performed, using a real surface and upper air meterological data to predict trustworthy modeling-results. Pollutant-releases from windscreen chambers of enclosed poultry farms, P1 and P2, and from a open poultry farm, P3, and their diffusing behavior were modeled by CALPUFF modeling with volume sources as well as by finally-adjusted CALPUFF modeling where a linear velocity of upward-exit gas averaged with the weight of each directional-emitting area was applied as a model-linear velocity ($u^M_y$) at a stack, with point sources. In addition, based upon the scenario of poultry farm-releasing odor and particulate matter (PM) removal efficiencies of 0, 20, 50 and 80% or their corresponding emission rates of 100, 80, 50 and 20%, respectively, CALPUFF modeling was performed and concentrations of odor and PM were predicted at the region as a discrete receptor where civil complaints had been frequently filed. The predicted concentrations of ammonia, hydrogen sulfide, $PM_{2.5}$ and $PM_{10}$ were compared with those required to meet according to the offensive odor control law or the atmospheric environmental law. Subsequently their required removal efficiencies at poultry farms of P1, P2 and P3 were estimated. As a result, a priori assumption that pollutant concentrations at their discrete receptors are reduced by the same fraction as pollutant concentrations at P1, P2 and P3 as volume source or point source, were controlled and reduced, was proven applicable in this study. In case of volume source-adopted CALPUFF modeling, its required removal efficiencies of P1 compared with those of point source-adopted CALPUFF modeling, were predicted similar each other. However, In case of volume source-adopted CALPUFF modeling, its required removal efficiencies of both ammonia and $PM_{10}$ at not only P2 but also P3 were predicted higher than those of point source-adopted CALPUFF modeling. Nonetheless, the volume source-adopted CALPUFF modeling was preferred as a safe approach to resolve civil complaints. Accordingly, the required degrees of pollution prevention against ammonia, hydrogen sulfide, $PM_{2.5}$ and $PM_{10}$ at P1 and P2, were estimated in a proper manner.

• Korean Journal of Child Education & Care
• /
• v.18 no.4
• /
• pp.247-265
• /
• 2018

Objective: The purpose of this study was to investigate the effect of teacher support program for integration of handicapped children on teaching efficacy of daycare center teachers. Methods: In the study, 12 day care teachers in 4 day care centers in Seoul and Gyeonggi area were selected as experimental groups and 12 teachers in 5 day care centers were selected as control group. Teacher education is carried out through group education, such as understanding of developmental area, curriculum modification, activity-based embedded intervention, cooperative learning, direct teaching, disability understanding education, behavior support, family support. Individual teacher education provided counseling on the reality of child care for children with disabilities that reflects the needs of teachers for integrated child care for handicapped children. Teacher's Efficacy in Inclusive Practices (TEIP) was used as a pre post test to measure teacher's efficacy change. In order to analyze the results of the study, two independent sample t tests were conducted on the difference between pre-post test of teacher efficacy between the two groups. Results: As a result, There was a significant difference in the pre-post change of teacher efficacy between the two groups. Conclusion/Implications: The results of this study are as follows, teacher support program provided immediate feedback in integrated child daycare center for the handicapped children, child care teachers improved their integrated handicapped children care expertise, provided responsive teacher support program to the actual needs of the site, teacher support program reflected various variables related to integration, and emphasized the cooperative relationship between researcher and child daycare center teacher. The results of this study can be used as actual data of field where lack of support for the integration of handicapped children is lacking.

• Journal of Wetlands Research
• /
• v.24 no.4
• /
• pp.345-353
• /
• 2022

A wastewater treatment plant (WWTP) is a major gateway for the engineered nano-particles (ENPs) entering the water bodies. However existing studies have reported that many WWTPs exceed the No Observed Effective Concentration (NOEC) for ENPs in the effluent and thus they need to be designed or operated to more effectively control ENPs. Understanding and predicting ENPs behaviors in the unit and \the whole process of a WWTP should be the key first step to develop strategies for controlling ENPs using a WWTP. This study aims to provide a modeling tool for predicting behaviors and removal efficiencies of ENPs in a WWTP associated with process characteristics and major operating conditions. In the developed model, four unit processes for water treatment (primary clarifier, bioreactor, secondary clarifier, and tertiary treatment unit) were considered. Additionally the model simulates the sludge treatment system as a single process that integrates multiple unit processes including thickeners, digesters, and dewatering units. The simulated ENP was nano-sized TiO₂, (nano-TiO₂) assuming that its behavior in a WWTP is dominated by the attachment with suspendid solids (SS), while dissolution and transformation are insignificant. The attachment mechanism of nano-TiO₂ to SS was incorporated into the model equations using the apparent solid-liquid partition coefficient (Kd) under the equilibrium assumption between solid and liquid phase, and a steady state condition of nano-TiO₂ was assumed. Furthermore, an MS Excel-based user interface was developed to provide user-friendly environment for the nano-TiO₂ removal efficiency calculations. Using the developed model, a preliminary simulation was conducted to examine how the solid retention time (SRT), a major operating variable affects the removal efficiency of nano-TiO₂ particles in a WWTP.

• Korean Journal of Culture and Social Issue
• /
• v.21 no.4
• /
• pp.617-647
• /
• 2015

The purposes of this study was to develop a valid scale measuring organization-related anxiety and to use this scale to examine the relation of organizational anxiety to demographic variables, job satisfaction and organizational committment. A series of studies were conducted to develop a scale for organizational anxiety. Initially, the 97 items were adopted by expert ratings. A exploratory factor analysis with a sample of 435 workers yielded a preliminary version of organizational anxiety scale with 28 items. Subsequently, a confirmatory factor analysis was conducted with a sample of 566 workers, leaving 20 items. The final version of the organizational anxiety scale consisted of 4 sub-factors: perception of future uncertainty, perception of locus of control, interpersonal anxiety, and perception of alternatives. In this study, the examined demographic characteristics included sex, age, type of occupation, type of industry, occupational position, monthly income and educational level. Organizational effectiveness was composed of job satisfaction and organizational commitment. As mediators, organizational culture, life satisfaction, self efficacy, and social support were explored. The negative relationship was observed between organizational anxiety and organizational effectiveness. The results showed the significant differences in organizational anxiety by demographic characteristics. The mediators were explored for the relationship between organizational anxiety and job satisfaction and between organizational anxiety and organizational commitment. The negative relationship between organizational anxiety and job satisfaction was mediated by the group culture, the developmental culture, the rational culture, life satisfaction, self-efficacy, and social support. Individuals with the higher level of these mediators reported greater job satisfaction even if they experienced organizational anxiety. The partial mediation effect of the group culture, the developmental culture, the rational culture, life satisfaction, and social support was observed on the negative relationship between organizational anxiety and organizational commitment. These results implies that job satisfaction and organizational commitment can be improved with the interventions on organizational cultures, self-efficacy, and social support despite the presence of organizational anxiety. Based on these results, the implication and limitations of this study and the directions for future research discussed.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.120-129
• /
• 2023

To evaluate the vertical loads on railway bridges, conventional load tests are typically conducted. However, these tests often entail significant costs and procedural challenges. Railway conditions involve nearly identical load profiles due to standardized rail systems, which may appear straightforward in terms of load conditions. Nevertheless, this study aims to validate load tests conducted under operational train conditions by comparing the results with those obtained from conventional load tests. Additionally, static and dynamic structural behaviors are extracted from the measurement data for evaluation. To ensure the reliability of load testing, this research demonstrates feasibility through comparisons of existing measurement data with sensor attachment locations, train speeds, responses between different rail lines, tendency analysis, selection of impact coefficients, and analysis of natural frequencies. This study applies to the Dongho Railway Bridge and verifies the applicability of the proposed method. Ten operational trains and 44 sensors were deployed on the bridge to measure deformations and deflections during load test intervals, which were then compared with theoretical values. The analysis results indicate good symmetry and overlap of loads, as well as a favorable comparison between static and dynamic load test results. The maximum measured impact coefficient (0.092) was found to be lower than the theoretical impact coefficient (0.327), and the impact influence from live loads was deemed acceptable. The measured natural frequencies approximated the theoretical values, with an average of 2.393Hz compared to the calculated value of 2.415Hz. Based on these results, this paper demonstrates that for evaluating vertical loads, it is possible to measure deformations and deflections of truss railway bridges through load tests under operational train conditions without traffic control, enabling the calculation of response factors for stress adjustments.

• Journal of Astronomy and Space Sciences
• /
• v.22 no.2
• /
• pp.147-174
• /
• 2005

To understand the physical processes that control the high-latitude lower thermospheric dynamics, we quantify the forces that are mainly responsible for maintaining the high-latitude lower thermospheric wind system with the aid of the National Center for Atmospheric Research Thermosphere-Ionosphere Electrodynamics General Circulation Model (NCAR-TIEGCM). Momentum forcing is statistically analyzed in magnetic coordinates, and its behavior with respect to the magnitude and orientation of the interplanetary magnetic field (IMF) is further examined. By subtracting the values with zero IMF from those with non-zero IMF, we obtained the difference winds and forces in the high-latitude 1ower thermosphere(<180 km). They show a simple structure over the polar cap and auroral regions for positive($B_y$ > 0.8|$\overline{B}_z$ |) or negative($B_y$ < -0.8|$\overline{B}_z$|) IMF-$\overline{B}_y$ conditions, with maximum values appearing around -80$^{\circ}$ magnetic latitude. Difference winds and difference forces for negative and positive $\overline{B}_y$ have an opposite sign and similar strength each other. For positive($B_z$ > 0.3125|$\overline{B}_y$|) or negative($B_z$ < -0.3125|$\overline{B}_y$|) IMF-$\overline{B}_z$ conditions the difference winds and difference forces are noted to subauroral latitudes. Difference winds and difference forces for negative $\overline{B}_z$ have an opposite sign to positive $\overline{B}_z$ condition. Those for negative $\overline{B}_z$ are stronger than those for positive indicating that negative $\overline{B}_z$ has a stronger effect on the winds and momentum forces than does positive $\overline{B}_z$ At higher altitudes(>125 km) the primary forces that determine the variations of tile neutral winds are the pressure gradient, Coriolis and rotational Pedersen ion drag forces; however, at various locations and times significant contributions can be made by the horizontal advection force. On the other hand, at lower altitudes(108-125 km) the pressure gradient, Coriolis and non-rotational Hall ion drag forces determine the variations of the neutral winds. At lower altitudes(<108 km) it tends to generate a geostrophic motion with the balance between the pressure gradient and Coriolis forces. The northward component of IMF By-dependent average momentum forces act more significantly on the neutral motion except for the ion drag. At lower altitudes(108-425 km) for negative IMF-$\overline{B}_y$ condition the ion drag force tends to generate a warm clockwise circulation with downward vertical motion associated with the adiabatic compress heating in the polar cap region. For positive IMF-$\overline{B}_y$ condition it tends to generate a cold anticlockwise circulation with upward vertical motion associated with the adiabatic expansion cooling in the polar cap region. For negative IMF-$\overline{B}_z$ the ion drag force tends to generate a cold anticlockwise circulation with upward vertical motion in the dawn sector. For positive IMF-$\overline{B}_z$ it tends to generate a warm clockwise circulation with downward vertical motion in the dawn sector.

• Journal of Music and Human Behavior
• /
• v.5 no.1
• /
• pp.67-90
• /
• 2008

This case used MI techniques that give an imagery experience to depressed client's mental resource, and that makes in to verbalism. Also those images are supportive level therapy examples that apply to positive variation. MI is simple word of 'Music and Imagery' with one of psychology cure called GIM(Guided Imagery and Music). It makes client can through to the inner world and search, confront, discern and solve with suitable music. Supportive Level MI is only used from safety level music. Introduction of private session can associate specification feeling, subject, word or image. And those images are guide to positive experience. The First session step of MI program is a prelude that makes concrete goal like first interview. The Second step is a transition that can concretely express about client's story. The third step is induction and music listening. And it helps to associate imagery more easily by used tension relaxation. Also it can search and associate about various imagery from the music. The last step is process that process drawing imagery, talking about personal imagery experience in common with therapist that bring the power by expansion the positive experience. Client A case targets rapport forming(empathy, understanding and support), searching positive recourse(child hood, family), client's emotion and positive support. Music must be used simple tone, repetition melody, steady rhythm and organized by harmony music of what therapist and client's preference. The client used defense mechanism and couldn't control emotion by depression in 1 & 2 sessions. But the result was client A could experience about support and understanding after 3 sessions. After session 4 the client had stable, changed to positive emotion from the negative emotion and found her spontaneous. Therefore, at the session 6, the client recognized that she will have step of positive time at the future. About client B, she established rapport forming(empathy, understanding and support) and searching issues and positive recognition(child hood, family), expression and insight(present, future). The music was comfortable, organizational at the session 1 & 2, but after session 3, its development was getting bigger and the main melody changed variation with high and low of tune. Also it used the classic and romantic music. The client avoids bad personal relations to religious relationship. But at the session 1 & 2, client had supportive experience and empathy because of her favorite, supportive music. After session 3, client B recognized and face to face the present issue. But she had avoidance and face to face of ambivalence. The client B had a experience about emotion change according depression and face to face client's issues After session 4. At the session 5 & 6, client tried to have will power of healthy life and fairly attitude, train mental power and solution attitude in the future. On this wise, MI program had actuality and clients' issues solution more than GIM program. MI can solute the issue by client's based issue without approach to unconsciousness like GIM. Especially it can use variety music and listening time is shorter than GIM and structuralize. Also can express client's emotion very well. So it can use corrective and complement MI program to children, adolescent and adult.

• Journal of Global Scholars of Marketing Science
• /
• v.17 no.2
• /
• pp.31-54
• /
• 2007

The exchange between buyers and sellers in the industrial market is changing from short-term to long-term relationships. Long-term relationships are governed mainly by formal contracts or informal agreements, but many scholars are now asserting that controlling relationship by using formal contracts under environmental dynamism is inappropriate. In this case, partners will depend on each other's flexibility or interdependence. The former, flexibility, provides a general frame of reference, order, and standards against which to guide and assess appropriate behavior in dynamic and ambiguous situations, thus motivating the value-oriented performance goals shared between partners. It is based on social sacrifices, which can potentially minimize any opportunistic behaviors. The later, interdependence, means that each firm possesses a high level of dependence in an dynamic channel relationship. When interdependence is high in magnitude and symmetric, each firm enjoys a high level of power and the bonds between the firms should be reasonably strong. Strong shared power is likely to promote commitment because of the common interests, attention, and support found in such channel relationships. This study deals with environmental dynamism in high-tech industry. Firms in the high-tech industry regard it as a key success factor to successfully cope with environmental changes. However, due to the lack of studies dealing with environmental dynamism and supply chain commitment in the high-tech industry, it is very difficult to find effective strategies to cope with them. This paper presents the results of an empirical study on the relationship between environmental dynamism and supply chain commitment in the high-tech industry. We examined the effects of consumer, competitor, and technological dynamism on supply chain commitment. Additionally, we examined the moderating effects of flexibility and dependence of supply chains. This study was confined to the type of high-tech industry which has the characteristics of rapid technology change and short product lifecycle. Flexibility among the firms of this industry, having the characteristic of hard and fast growth, is more important here than among any other industry. Thus, a variety of environmental dynamism can affect a supply chain relationship. The industries targeted industries were electronic parts, metal product, computer, electric machine, automobile, and medical precision manufacturing industries. Data was collected as follows. During the survey, the researchers managed to obtain the list of parts suppliers of 2 companies, N and L, with an international competitiveness in the mobile phone manufacturing industry; and of the suppliers in a business relationship with S company, a semiconductor manufacturing company. They were asked to respond to the survey via telephone and e-mail. During the two month period of February-April 2006, we were able to collect data from 44 companies. The respondents were restricted to direct dealing authorities and subcontractor company (the supplier) staff with at least three months of dealing experience with a manufacture (an industrial material buyer). The measurement validation procedures included scale reliability; discriminant and convergent validity were used to validate measures. Also, the reliability measurements traditionally employed, such as the Cronbach's alpha, were used. All the reliabilities were greater than.70. A series of exploratory factor analyses was conducted. We conducted confirmatory factor analyses to assess the validity of our measurements. A series of chi-square difference tests were conducted so that the discriminant validity could be ensured. For each pair, we estimated two models-an unconstrained model and a constrained model-and compared the two model fits. All these tests supported discriminant validity. Also, all items loaded significantly on their respective constructs, providing support for convergent validity. We then examined composite reliability and average variance extracted (AVE). The composite reliability of each construct was greater than.70. The AVE of each construct was greater than.50. According to the multiple regression analysis, customer dynamism had a negative effect and competitor dynamism had a positive effect on a supplier's commitment. In addition, flexibility and dependence had significant moderating effects on customer and competitor dynamism. On the other hand, all hypotheses about technological dynamism had no significant effects on commitment. In other words, technological dynamism had no direct effect on supplier's commitment and was not moderated by the flexibility and dependence of the supply chain. This study makes its contribution in the point of view that this is a rare study on environmental dynamism and supply chain commitment in the field of high-tech industry. Especially, this study verified the effects of three sectors of environmental dynamism on supplier's commitment. Also, it empirically tested how the effects were moderated by flexibility and dependence. The results showed that flexibility and interdependence had a role to strengthen supplier's commitment under environmental dynamism in high-tech industry. Thus relationship managers in high-tech industry should make supply chain relationship flexible and interdependent. The limitations of the study are as follows; First, about the research setting, the study was conducted with high-tech industry, in which the direction of the change in the power balance of supply chain dyads is usually determined by manufacturers. So we have a difficulty with generalization. We need to control the power structure between partners in a future study. Secondly, about flexibility, we treated it throughout the paper as positive, but it can also be negative, i.e. violating an agreement or moving, but in the wrong direction, etc. Therefore we need to investigate the multi-dimensionality of flexibility in future research.

• Asia Marketing Journal
• /
• v.13 no.4
• /
• pp.55-76
• /
• 2012

Most people prefer to choose zero-cost products they may get without paying any money. The 'zero-cost effect' can be explained with a 'zero-cost model' where consumers attach special values to zero-cost products in a different way from general economic models (Shampanier, Mazar and Ariely 2007). If 2 different products at the regular prices of ￦200 and ￦400 simultaneously offer ￦200 discounts, the prices will be changed to ￦0 and ￦200, respectively. In spite of the same price gap of the two products after the ￦200 discounts, people are much more likely to select the free alternative than the same product at the price of ￦200. Although prior studies have focused on the 'zero-cost effect' in isolation of other factors, this study investigates the moderating effects of a self-regulatory resource and a construal level on the selection of free products. Self-regulatory resources induce people to control or regulate their behavior. However, since self-regulatory resources are limited, they are to be easily depleted when exerted (Muraven, Tice, and Baumeister 1998). Without the resources, consumers tend to become less sensitive to price changes and to spend money more extravagantly (Vohs and Faber 2007). Under this condition, they are also likely to invest less effort on their information processing and to make more intuitive decisions (Pocheptsova, Amir, Dhar, and Baumeister 2009). Therefore, context effects such as price changes and zero cost effects are less likely in the circumstances of resource depletion. In addition, construal levels have profound effects on the ways of information processing (Trope and Liberman 2003, 2010). In a high construal level, people tend to attune their minds to core features and desirability aspects, whereas, in a low construal level, they are more likely to process information based on secondary features and feasibility aspects (Khan, Zhu, and Kalra 2010). A perceived value of a product is more related to desirability whereas a zero cost or a price level is more associated with feasibility. Thus, context effects or reliance on feasibility (for instance, the zero cost effect) will be diminished in a high level construal while those effects may remain in a low level construal. When people make decisions, these 2 factors can influence the magnitude of the 'zero-cost effect'. This study ran two experiments to investigate the effects of self-regulatory resources and construal levels on the selection of a free product. Kisses and Ferrero-Rocher, which were adopted in the prior study (Shampanier et al. 2007) were also used as alternatives in Experiments 1 and 2. We designed Experiment 1 in order to test whether self-regulatory resource depletion will moderate the zero-cost effect. The level of self-regulatory resources was manipulated with two different tasks, a Sudoku task in the depletion condition and a task of drawing diagrams in the non-depletion condition. Upon completion of the manipulation task, subjects were randomly assigned to one of a decision set with a zero-cost option (i.e., Kisses ￦0, and Ferrero-Rocher ￦200) or a set without a zero-cost option (i.e., Kisses ￦200, and Ferrero-Rocher ￦400). A pair of alternatives in the two decision sets have the same price gap of ￦200 between a low-priced Kisses and a high-priced Ferrero-Rocher. Subjects in the no-depletion condition selected Kisses more often (71.88%) over Ferrero-Rocher when Kisses was free than when it was priced at ￦200 (34.88%). However, the zero-cost effect disappeared when people do not have self-regulatory resources. Experiment 2 was conducted to investigate whether constual levels influence the magnitude of the 'zero-cost effect'. To manipulate construal levels, 4 different 'why (in the high construal level condition)' or 'how (in the low construal level condition)' questions about health management were asked. They were presented with 4 boxes connected with downward arrows. In a box at the top, there was one question, 'Why do I maintain good physical health?' or 'How do I maintain good physical health?' Subjects inserted a response to the question of why or how they would maintain good physical health. Similar tasks were repeated for the 2nd, 3rd, and 4th responses. After the manipulation task, subjects were randomly assigned either to a decision set with a zero-cost option, or to a set without it, as in Experiment 1. When a low construal level is primed with 'how', subjects chose free Kisses (60.66%) more often over Ferrero-Rocher than they chose ￦200 Kisses (42.19%) over ￦400 FerreroRocher. On contrast, the zero-cost effect could not be observed any longer when a high construal level is primed with 'why'.