• 제목/요약/키워드: bedding design

검색결과 68건 처리시간 0.027초

셰일 및 운모편암의 사면안전성에 미치는 영향 (Effect of shale or mica schist on slope stability)

  • 이병주;신희순;선우춘
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2006년도 춘계 학술발표회 논문집
    • /
    • pp.1-11
    • /
    • 2006
  • To be design the slope, the area distributed the shale or mica schist which was metamorphosed by shale must carefully consider the stability. The shale has the detrital materials of which the grain size are 1/256mm and fissility. As the reason the slope of shale is always unstable by bedding slip and fissility but also the joint and fault. Mica schist is also another unstable rock for slope by schistosity, cleavage, axial plane of a fold etc. In general shale and mica schist contain the swelling clay minerals such as smectite, vermiculite and montmorillonite. These minerals make the slope unstable. At OO tunnel construction area for the rail way of the Kyungbu high speed train, the slope of mica schist is very unstable by the distribution phenomena of the discontinuous plane such as joints which are 1-5cm spacing and thrust and strike-slip fault. By the drilling core of this area, most RQD have 0-20%.

  • PDF

Experimental Study on Shear Connector for Precast Concrete Decks

  • Chung, Chul-Hun;Shim, Chang-Su;Jeong, Un-Yong
    • KCI Concrete Journal
    • /
    • 제13권1호
    • /
    • pp.61-67
    • /
    • 2001
  • For the design of shear connection for the composite precast concrete slabs. it is necessary to investigate its strength, stiffness, slip capacity and fatigue endurance. For theme purposes, push-out tests were performed with variations of the stud shank diameter and the compressive strength of the mortar. From the experimental studies, it could be observed that the deformation of the shear studs in a full-depth precast concrete slabs were greater than those in a cast-in-place slabs. The static strength of the shear connections obtained agree approximately with those evaluated from the tensile strength of the stud shear connectors owing to the effect of the bedding layer between the slabs and the beams. An empirical equation for the initial shear stiffness of a shear connection was also proposed. On the basis of the push-out tests, a full-scale composite beams with 8.0m span was designed and fatigue tests were carried out to study the behaviour of the stud shear connection and its effects on the flexural behaviour of the beam. The bonding arid friction between the concrete slab and the steel beam considerably increased the fatigue endurance of the shear connection.

  • PDF

토공장비조합에 따른 공사기간 및 이산화탄소 배출량의 상관성 분석 (Correlation Analysis on the Duration and CO2 Emission Following the Earth-work Equipment Combination)

  • 김병수
    • 대한토목학회논문집
    • /
    • 제31권4D호
    • /
    • pp.603-611
    • /
    • 2011
  • 1997년 온실가스 감축을 위한 교토의정서가 채택된 이후 각 국가들은 대표적인 온실가스인 이산화탄소를 줄이기 위하여 전 산업에 걸쳐 다각적인 노력을 하고 있다. 건설산업에서도 온실가스 배출량을 고려한 Passive Design 이나, LCA기준에 의한 환경영향평가와 같은 소프트웨어적 기술의 개발 그리고 설비시스템의 조정이나 친환경 자재의 개발과 같은 하드웨어적 기술의 개발과 같이 두 가지 형태의 기술이 다양한 방법으로 개발됨으로써 이산화탄소 저감을 시도하고 있다. 그러나 건설산업에서 세부공정을 고려한 이산화탄소 배출과 관련한 연구는 전무하다. 본 연구에서는 철도노반공사 중에서 이산화탄소 배출량이 가장 많은 공정인 토공사를 대상으로 장비조합에 따른 이산화탄소 배출량을 산출하여 장비조합과 이산화탄소 배출량 그리고 공사기간의 상관성을 분석하였다.

Three-Hinge 파괴의 메커니즘 및 안정성에 관한 분석 (A Study on the Stability and Mechanism of Three-Hinge Failure)

  • 문준식;박우정
    • 한국지반공학회논문집
    • /
    • 제33권4호
    • /
    • pp.5-15
    • /
    • 2017
  • 3힌지파괴(three-hinge failure)는 비탈면 방향과 평행한 절리와 그에 직교하는 절리로 구성된 암반비탈면에서 발생한다. 비탈면 설계 시 일반적으로 쓰이는 한계평형법과 유한요소법은 이러한 암반비탈면 내 3힌지파괴를 모사하기에는 어려움이 따른다. 따라서 본 연구에서는 3힌지파괴를 모사하기 위해 2차원 DEM 해석프로그램인 UDEC을 이용하여 풋월 비탈면에서 흔히 발생되는 3힌지파괴의 메커니즘 및 안정성에 미치는 영향 인자에 대하여 매개변수 분석을 연구하였다. 매개변수 분석은 암반절리(층면절리, 공액절리 등)의 구조 및 지하수위 조건 등을 변경하여 수행하였다. 수치해석 결과, 3힌지파괴를 유발하는 인자 중 지하수위의 영향이 가장 큰 것으로 나타났으며, 층면절리 및 기저부절리의 마찰각 변화에 따라 안전율과 파괴 형태가 다르게 나타나는 것으로 분석되었다. 본 연구결과를 통해 비탈면 보강을 포함한 풋월 비탈면의 최적설계 및 시공에 적용될 수 있을 것으로 판단된다.

FracSys와 UDEC을 이용한 사면 파괴 양상 분석 통계적 절리망 생성 기법 및 Monte Carlo Simulation을 통한 사면 안정성 해석

  • 김태희;최재원;윤운상;김춘식
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2002년도 봄 학술발표회 논문집
    • /
    • pp.651-656
    • /
    • 2002
  • In general, the most important problem in slope stability analysis is that there is no definite way to describe the natural three-dimensional Joint network. Therefore, the many approaches were tried to anlayze the slope stability. Numerical modeling approach is one of the branch to resolve the complexity of natural system. UDEC, FLAC, and SWEDGE are widely used commercial code for the purpose on stability analysis. For the purpose on the more appropriate application of these kind of code, however, three-dimensional distribution of joint network must be identified in more explicit way. Remaining problem is to definitely describe the three dimensional network of joint and bedding, but it is almost impossible in practical sense. Three dimensional joint generation method with random number generation and the results of generation to UDEC have been applied to settle the refered problems in field site. However, this approach also has a important problem, and it is that joint network is generated only once. This problem lead to the limitation on the application to field case, in practical sense. To get rid of this limitation, Monte Carlo Simulation is proposed in this study 1) statistical analysis of input values and definition of the applied system with statistical parameter, 2) instead of the consideration of generated network as a real system, generated system is just taken as one reliable system, 3) present the design parameters, through the statistical analysis of ouput values Results of this study are not only the probability of failure, but also area of failure block, shear strength, normal strength and failure pattern, and all of these results are described in statistical parameters. The results of this study, shear strength, failure area, pattern etc, can provide the direct basement on the design, cutoff angle, support pattern, support strength and etc.

  • PDF

종합슈퍼마켓의 소비자들의 구매경향별 POP광고반응에 관한 연구 (A study on the P.O.P response for the buying trends of General Supermarket)

  • 김태성;김판진
    • 유통과학연구
    • /
    • 제8권1호
    • /
    • pp.35-42
    • /
    • 2010
  • 본 연구는 종합슈퍼마켓에서 소비자 구매경향별 구매시점광고(POP)에 대한 반응과 POP를 접한 후 최종 구매단계에서의 중요 의사결정 요인과의 관계를 규명하기 위한 연구이다. 본 연구결과를 살펴보면 첫째, 종합슈퍼의 POP광고반응 중 소비자들은 엔드켑(End Cap)에 대한 반응점수가 높은 것으로 나타났으며, 둘째는 성별 충동적 구매경향에 대한 차이는 전반적으로 남성이 여성보다 높았다. 또한, 구매경향 간, 변수들 간의 상관관계를 살펴본 결과 충동적 구매와 비계획적 구매경향(r=.325), 충동적 구매경향과 즉각적 구매경향(r=.249)에서 상관관계가 있는 것으로 나타났다.(p<0.01) 본 연구 결과 소비자의 소비패턴도 점점 합리성 추구하며 계획적 쇼핑과 더불어 소비에 있어 POP 광고가 자신의 합리성 또는 계획성을 촉진시키는 요인이 되었을 때 POP 광고가 비로소 소비로 연결될 수 있다는 연구결과를 도출하였다.

  • PDF

Investigation lateral deformation and failure characteristics of strip coal pillar in deep mining

  • Chen, Shaojie;Qu, Xiao;Yin, Dawei;Liu, Xingquan;Ma, Hongfa;Wang, Huaiyuan
    • Geomechanics and Engineering
    • /
    • 제14권5호
    • /
    • pp.421-428
    • /
    • 2018
  • In deep mining, the lateral deformation of strip coal pillar appears to be a new characteristic. In order to study the lateral deformation of coal-mass, a monitoring method and monitoring instrument were designed to investigate the lateral deformation of strip coal pillar in Tangkou Coalmine with the mining depth of over 1000 m. Because of without influence of repeated mining, the bedding sandstone roof is easy to break and the angle between maximum horizontal stress and the roadway is small, the maximum lateral deformation is only about 287 mm lower than the other pillars in the same coalmine. In deep mining, the energy accumulation and release cause a discontinuous damage in the heterogeneous coal-mass, and the lateral deformation of coal pillar shows discontinuity, step and mutation characters. These coal-masses not only show a higher plasticity but also the high brittleness at the same time, and its burst tendency is more obvious. According to the monitoring results and theoretical calculations, the yield zone of the coal pillar width is determined as 15.6 m. The monitoring results presented through this study are of great significance to the stability analysis and design of coal pillar.

리빙 라이프 스타일 숍 브랜드의 매장 체험요소 사례분석과 소비자들의 매장이용행태, 제품구매동기, 매장태도에 대한 실증적 연구 (A Case Study on Living Lifestyle Shop Brands focusing on Store Experiential Factors and an Empirical Study on Store Usage Behavior, Product Purchase Motives, Store Attitudes of Living Lifestyle Shop Consumers)

  • 서고우미;오경화
    • 한국의류산업학회지
    • /
    • 제19권4호
    • /
    • pp.448-467
    • /
    • 2017
  • Attention to living lifestyle shops covering with the wide product range including household items, interior decoration, and bedding have recently increased since consumers have been improving their standard of living and income levels and they are getting more interested in up-to-date trends of global living lifestyles. The purpose of this study is first, to analyze the market situation of living lifestyle shops using the case study method and second, to investigate consumer's store usage behavior, product purchase motives, and attitudes to the living lifestyle shops using the empirical study method. For an empirical study, the survey was conducted with 20s to 50s female respondents who have visited living lifestyle shops and a total of 227 responses were analyzed using SPSS 18.0. The results of this study were as follows. The most frequently visit store was MUJI and most of respondents tended to visit the store once a month and their interest and purchase items were household items. Only impulsive purchase motives among other motives of living lifestyle shops, such as others-oriented, situational, and reasonable motives, significantly had a positive effect on store attitudes toward living lifestyle shops. There were differences in purchasing items at living lifestyle shops depending on marriage status and occupation. Purchase motives of living lifestyle products were statistically influenced by demographic factors such as age, marriage status and income level, however store attitudes were not. The managerial implications for living lifestyle shops are discussed limitations and areas for future research as well.

Evaluation of Anti-SE Bacteriophage as Feed Additives to Prevent Salmonella enteritidis (SE) in Broiler

  • Kim, K.H.;Lee, G.Y.;Jang, J.C.;Kim, J.E.;Kim, Y.Y.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제26권3호
    • /
    • pp.386-393
    • /
    • 2013
  • This experiment was conducted to evaluate anti-Salmonella enteritidis (anti-SE) bacteriophage as feed additives to prevent Salmonella enteritidis in broilers. The experimental diets were formulated for 2 phases feeding trial, and 3 different levels (0.05, 0.1 and 0.2%) of anti-SE bacteriophage were supplemented in basal diet. The basal diet was regarded as the control treatment. A total of 320 1-d-old male broilers (Ross 308) were allotted by randomized complete block (RCB) design in 8 replicates with 10 chicks per pen. All birds were raised on rice hull bedding in ambient controlled environment and free access to feed and water. There were no significant differences in body weight gain, feed intake and feed conversion ratio (FCR) at terminal period among treatments (p>0.05). Relative weights of liver, spleen, abdominal fat and tissue muscle of breast obtained from each anti-SE bacteriophage treatment were similar to control, with a slightly higher value in anti-SE bacteriophage 0.2%. In addition, a numerical difference of glutamic-oxaloacetic transaminase (GOT), glutamic-pyruvic transaminase (GPT) and LDL cholesterol level was observed in the 0.2% anti-SE bacteriophage application even though blood profiles were not significantly affected by supplemented levels of anti-SE bacteriophage (p>0.05). In the result of a 14 d record after Salmonella enteritidis challenge of 160 birds from 4 previous treatments, mortality was linearly decreased with increasing anti-SE bacteriophage level (p<0.05), and Salmonella enteritidis concentration in the cecum was decreased with increasing levels of anti-SE bacteriophage (p<0.05). Based on the results of this study, it is considered that supplementation of 0.2% anti-SE bacteriophage may not cause any negative effect on growth, meat production, and it reduces mortality after Salmonella enteritidis challenge. These results imply to a possible use of anti-SE bacteriophage as an alternative feed additive instead of antibiotics in broilers diet.

한국형 한협 육계의 행동 특성과 성장성에 미치는 Litter Type과 Gender의 영향 (Effects of Litter Type and Gender on Behavior Characteristics and Growth Performance of Korean Hanhyup Broiler)

  • 양가영;하재정;노희종;조창연;오승민;오동엽
    • 한국가금학회지
    • /
    • 제46권3호
    • /
    • pp.155-160
    • /
    • 2019
  • The Korean Hanhyup broiler has commercialized native meat-type chicken. This study aimed to determine the effects of two types of litter material-sawdust and rice husk, and gender on the Korean Hanhyup broiler. Chicks (n=416) were randomly assigned in a $2{\times}2$ factorial design by type of litter material and gender. The behavior of chicken's was monitored continuously for 12 hours during the $1^{st}$ through $8^{th}$ week of age. The time spent on standing, sitting, and walking and the frequency of drinking, feeding, preening, dust bathing, flapping, and aggressive pecking, and pecking of chicken's behavior were recorded. The behavior of chickens during the starter (1 to 4 weeks) and finisher period (5 to 8 weeks) was compared to observe the changes upon maturity. Our results indicate that litter material type and gender have no effect on the behavior of chickens. However, aggressive pecking and pecking caused increment in the rice husk as compared to sawdust (P<0.05). Sawdust as litter material for bedding was found to be better than rice husk with respect to Korean Hanhyup broiler behavior.