• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.8
• /
• pp.5534-5540
• /
• 2015

This In the railway signaling system, applications of axle counter in addition to track circuit goes on increasing for detecting train position. Consequently, this paper compares sensor methods of axle counter with between geo-magnetism method and proximity sensor method. And it presents differences and results, to improve reliabilities of train detection and axle counting. Also, this article presents an applied result which is based on field experience, with regard to installation, considering attachment condition of sensor part for accurate axle counting. This study acquires expandability that is able to perform not only axle counting function but also various other functions (direction detection of train, speed detection of train, and so on). It was a result of a change of design in order to judge phase difference of sensors, to improve reliability of axle counting. Furthermore, it does not subordinate to characteristics (type, weight of train). And it is confirmed that the omission of axle counting was not occurred in 350km/h. This was the result of Lab test after the construction of transfer equipment of trial axle and Test Bed for axle counting. Both of them are self-productions. Through this, it prepares foundation which is able to apply not only to train detection but also to speed of passing trains, formation number of trains, detector locking condition - when the train passes the section of switch point, and level crossing devices. Furthermore, it would be judged to contribute safety train operation if proximity sensor method applies to the whole railway signaling system from now on.

• Journal of the Korean GEO-environmental Society
• /
• v.17 no.12
• /
• pp.17-26
• /
• 2016

The experimental investigation aims at developing controlled low strength materials (CLSM) using a self-cementitious fly ash (FA) as a binder and a bottom ash (BA) as a aggregate. The fly ash and bottom ash used in this study were obtained from a circulating fluidized bed combustion boiler (CFBC) which produces relatively high CaO containing fly ash. To find the optimum mixing condition satisfying flow consistency and unconfined compression strength (UCS), the CLSM specimens were prepared under various mixing conditions, including two types of aggregate and different weight fractions between fly ash and aggregate. Additionally, the prepared specimens were evaluated using a scanning electron microscope (SEM) and X-ray diffraction (XRD). The results of this study demonstrate that the water content satisfying flow consistency ranges from 42% to 85% and the flowability is improved with increasing the fraction of aggregate in whole mixture. The USC ranges from 0.3 MPa to 1.9 MPa. The results of UCS increases with increasing the fraction of aggregate in FA-sand mixtures, but decreases with increasing the fraction of aggregate in FA-BA mixtures. SEM images and XRD patterns reveal that the occurrence of both geopolymerization and hydration. The results of this study demonstrate that CFBC fly ash could be used as an alternative binder of CLSM mixtures.

• Journal of Korean Society of Forest Science
• /
• v.104 no.1
• /
• pp.43-49
• /
• 2015

The production of high quality seedlings is a very important phase in silvicultural systems for successful reforestation or restoration. The purpose of this study was to quantitatively measure both growth performances and nutrient responses of Fraxinus rhynchophylla, Pinus densiflora, and Pinus koraiensis seedlings, which are commercially planted in Korea, according to the different types of soil improvement treatments. We applied soil brought (hereafter 'brought'), subsoil inversion (hereafter 'subsoil'), and mixture of brought soil with soil on nursery bed (hereafter 'mixing') in a permanent national nursery. Silt and clay contents were the highest at the subsoil treatment and organic material, soil nitrogen and phosphorus concentrations were the lowest at the brought treatment. The growth of F. rhynchophylla was the lowest at the subsoil treatment, but there were no significant differences among treatments. There were significant differences in only root nutrient concentrations of F. rhynchophylla among treatments: nitrogen, phosphorus, and potassium concentrations were the lowest at the subsoil or brought treatment. Mixing treatment increased N contents with deduction of N concentrations ('dilution') because of more dry weight increase compared with the amount of N uptake. This study suggested mix of brought soil with soil on a nursery bed in a permanently used nursery can economically be an effective technique to improve soil quality.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.5
• /
• pp.461-467
• /
• 2014

The growth and production of Pseudoblennius cottoides (1.80~10.01 cm TL) were investigated in an eelgrass bed of Dongdae Bay, Korea throughout 2006. A total 702 P. cottoides were collected with a small beam trawl. Growth in fish total length was expressed as: $TL=0.0539d^{0.9105}$. The relationships between total length body weight was estimated as $W=0.0079TL^3.1103$. The densities, biomass, daily, annual production, and P/B ratio were $0.06{\pm}0.062/m^2$, $0.10{\pm}0.144g/m^2$, $0.0005{\pm}0.0006g\;AFDW/m^2/day$, $0.1833g\;AFDW/m^2/year$, and 1.813, respectively. Monthly production of P. cottoides were greatly peak in May, July and September (0.0029, 0.0031 and $0.0019g\;AFDW/m^2/day$) when the biomass was high, and the lowest value in December (0.00004g AFDW/m^2/day) when the biomass was low. Monthly change in production of P. cottoides was positively correlated with biomass and temperature.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.57 no.1
• /
• pp.34-44
• /
• 2021

In order to collect basic information of response behavior of red seabream (Pagrus major) during pilling, works for constructing wind power station in Byeonsan Peninsular, Korea were investigated. Four cultured red seabream CRB1 to CRB4 [total length (TL): 27.1 ± 1.0 cm; body weight: 359 ± 30 g] were tagged with an acoustic tag and used in experiment. CRB1 and CRB2 to CBR4 were released on the sea surface at same time around the constructing site of the wind power plant on September 22, 2017 and July 18, 2018, respectively. The tracking of the CRB1 to CRB2 and CRB3 to CRB4 were conducted for two hours, approximately, using VR100 receiver including a directional hydrophone and VR2W receivers array consisted of 19 presence/absence receivers (VR2W receivers), respectively. The underwater noise level before (no pile driving works) and during pile driving works was measured 116.0-118.0 dB (re 1��Pa) and a maximum of 160 dB (re 1��Pa), respectively. CRB1 moved about 6.0 km with average swimming speed of 80.2 ± 20.5 cm/s for 2.1 hours without pile driving work. The average water depth of the sea bed on the route of CRB1 was 9.1 ± 0.4 m. CRB2 moved about 7.3 km with the average swimming speed of 96.8 ± 27.1 cm/s for 2.1 hours with pile driving work. The water depth of the sea bed on the route of CRB2 was 11.9 ± 0.6 m. At results of the Rayleigh's z-test two fishes CRB1 and CRB2 showed significant directionality in the movement (p < 0.01). Movement mean angles of CRB1 and CRB2 were 92.7 and 251.8°, respectively. CRB2, CRB3 and CRB4 exhibited the escaping behavioral response from the noise of source during the pile driving work. The swimming speed of the CRB2 exposed on the heavy underwater noise stimuli due to the pile driving work was 1.21 times faster than that of the CRB1 exposed on the ambient underwater noise in the study site.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.6 no.1
• /
• pp.63-72
• /
• 2004

This study was conducted to determine the growth and properties of green soybean sprouts(Vigna umbellata Thunb.) in soil culture. Patkong which is a small grain variety was sawn on electric heated hot bed in the greenhouse. Temperature of the culture bed were respectively 17, 20, 25, and 30℃ and water temperature were respectively 14, 17, 20 and 25℃. The kinds of soil used for this study were upland soil, sand, peatmoss and Pearlite, loess, loess and activated carbon. BA was treated in the concentrations of 240 times, 80 times, 40 times besides control. High temperature of 25 and 30℃ increased sprout yield compared to lower temperature but caused to decay from 7 days after sawing. Thus, the most optimum temperature for soil culture was 20℃. The best soil was sand of which increased fresh weight of 850g during same period. Addition of BA was most effective to promote sprout growth in the concentration of 80 times. Compared to general soybean sprouts, green soybean sprouts were 50% higher in fiber but 72% lower in glucide. Vitamin B was 200% higher in green soybean sprouts but vitamin C was higher in general soybean sprouts.

• Korean Chemical Engineering Research
• /
• v.61 no.3
• /
• pp.419-425
• /
• 2023

This paper presents the research results of analyzing the high-temperature corrosion characteristics of three currently commercialized heat exchanger tube materials under actual operating conditions of a biomass power plant. In order to precisely analyze the high-temperature corrosion characteristics of these materials, a high-temperature corrosion evaluation device was installed in the power plant equipment, which allows for adjusting the surface temperature of the heat exchanger tubes. Experiments were conducted for approximately 300 hours under various temperature and operating conditions. In this study, the commercialized heat exchanger tube materials used were SA213T12, SA213T22, and SA213T91 alloys. In order to objectively analyze the high-temperature corrosion characteristics of each material, an international standard-based process to remove corrosion products was applied to obtain the weight change of the specimens, and the average thickness loss and corrosion rate were derived. Thus, the high-temperature corrosion results for each condition were quantitatively compared and analyzed. In addition, in order to increase the reliability of the high-temperature corrosion evaluation method introduced in this study, the surface and cross-sectional corrosion of the specimens were confirmed by using scanning electron microscopy and energy-dispersive X-ray analysis. Based on these analysis results, it was found that the corrosion resistance of the commercial heat exchanger materials increases as the content of chrome and nickel in the composition increases. Additionally, it was found that the corrosion phenomenon is rapidly accelerated as the surface temperature increases. Finally, the replacement period (lifetime) of the heat exchanger tubes under each condition could be inferred through this study.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.408-417
• /
• 2023

This study aimed to investigate the effects of an aquaponics system utilizing catfish recirculating water on the growth and water quality in lettuce and chicory cultivation. After 60 d of catfish cultivation in the BFT-AP, the survival rate was 96.0% and average weight gain was 178.5 g. The WGR grew by 241.4% and the SGR was 3.0%. A comparison between lettuce and chicory cultivation using BFT-AP and hydroponics revealed significant increases in shoot height, leaf count per week, and biomass of the cultivated lettuce and chicory. The SPAD values also increased significantly by 15.4-43.3%. Water quality analysis of the BFT-AP systems and crop cultivation beds showed significant differences, except for K and Na. The average NO₃^- concentration in the sediment pond was significantly higher at 45.3±1.0. Comparison of water temperature, pH, EC, DO, and ORP in the BFT-AP system and crop cultivation beds revealed similar monthly water temperatures from July to September. The pH in the catfish culture pond was 0.3-1.2 lower than that in the crop cultivation beds, and the EC was approximately 0.01- 0.03 dS/m lower in the catfish culture pond than the crop cultivation beds. The monthly average ORP in the catfish culture bed steadily increased to 479.9 mV in October. Bacillus velezensis (AFB2-2) and Chlorella fusca (CF) were applied to the biological activation bed; the population density of CF showed a continuous increase, whereas that of AFB2-2 decreased after 15 d and gradually increased thereafter. Thus, the application of the recirculating aquaponics cultivation technology with catfish (BFT) enhances catfish cultivation and promotes the growth of lettuce and chicory. Therefore, it is considered suitable for the environment-friendly cultivation of lettuce and chicory.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.11
• /
• pp.1-9
• /
• 1972

For a measure against late transplanting, this experiment was conducted to investigate a reasonable seeding rate in nursery bed and a proper nursery size. The treatments applied to this experiment are as follows a) seeding rates: 0.2ι, 0.4ι and 0.6ι per 3.3$m^2$ b) nursery sizes. for 10a-field area: 39.6$m^2$, 49.5$m^2$ and 59.4$m^2$ c) transplanting dates: June 5, June 25 and July 15. The seeding date was April 26 and planting density was determined by the number of sound seedlings based on the combination of seeding rate and nursery size. The results may be summarized as follows: 1. In seedlings both increased nursery period and decreased seeding rate showed a remarkable-increase in plant height, number of leaves, dry matter weight and the ratio of dry weight to plant height. But their number of tillers and live leaves did not show such tendency. 2. Delayed transplanting date shortened culm length and panicle length as well as number of days from transplating to heading and it also delayed heading date. On the other hand the transplanting of 80-day seedlings resulted in premature heading. 3. As a result late transplanting reduced number of spikelets per panicle, maturing rate and 1000-grain weight. In the last analysis it linearly reduced grain yield. The decreasing rate of yield by late transplanting was 15.6% in June 25 plot and 41. 3% in July 15 plot, compared with the yield in June 5 plot. Such a remarkable decrease in yield of the extremely late transplanted plot was mainly due to markedly decreasing number of spikelets per panicle and 1000-grain weight. 4. Both increased seeding rate and nursery size gave a rise in number of tillers per unit area as well as number of transplanting hills but gave a fall in culm length and panicle length. 5. Accordingly, though thick seeded - dense planted plot increased number of panicles per unit area, decrease in number of spikelets per panicle and 1000-grain weight made no differences in yield between thick seeded - dense planted plot and thin seeded - sparse planted one. However, the yield in the thick seeded - dense planted plot transplanted on July 15 was reduced owing to the remarkable decrease in maturing rate and 1000-grain weight. 6. We came to the conclusion that as a measure against the extremely late transplanting the suitable seeding rate was 0.4ι per 3.3$m^2$ and the proper nursery size was 59.4$m^2$ for 10a-field area.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.4
• /
• pp.429-438
• /
• 2007

Early growth vigor(EGV) is one of the physiological characteristics that may contribute to the increase of genetic yield potential and radiation use efficiency by closing the canopy earlier. To estimate the genotypic variation of EGV, determine the relationships among the related traits, and identify the rapidly growing genotypes and indirect indicator for selection in breeding program, the evaluation of EGV and EGV-related traits was conducted for a total of 140 rice varieties consisting of 101 Korean, 25 Northern China and 14 IRRI-bred rice varieties in a serial sowing experiment in plastic rain shelter and plastic-covered nursery bed in 2003. EGV defined as the amount of leaf area and/or dry weight produced early in the season and the EGV-related traits such as length and breadth of the $2^{nd}\;and\;3^{rd}$ leaves showed highly significant positive correlation with the embryo and seed weight. Especially, the genotypic variation in the length of the third leaf was explained over 90% of genotypic variation in the seed weight. Owing to a large effect of seed size on EGV and its related traits, vigor measurements were adjusted based on their linear or exponential relationships with seed weight for excluding the seed weight effect. EGV and its related-traits adjusted for seed weight also showed big variation among genotypes. Increased EGV was genetically correlated with increases in breadth and length of early leaves. The broad-sense heritability for EGV was significantly high(81%), but lower than those of leaf breadth(90% for the $2^{nd}$ leaf and 93% for the $3^{rd}$ leaf) and length(87% for the $2^{nd}$ leaf and 89% for the $3^{rd}$ leaf). Significantly positive genetic correlations were found between EGV and the breadth and length of early leaves. The high heritability of early leaf breadth and length coupled with their strong genetic correlation with EGV indicated that the breadth and length of the $2^{nd}\;and\;3^{rd}$ leaf would be used as good indirect indicators for EGV selection in rice breeding program.