• 대한기계학회논문집
• /
• 제17권1호
• /
• pp.153-161
• /
• 1993

본 연구에서는 각 운전모드별 열특성을 전체적으로 고려하여 양질의 MHD발전 용 작동플라즈마를 얻기 위하여 필요한 효과적인 방책에 관하여 집중적으로 고찰하고 자 한다.

• 한국수산과학회지
• /
• 제15권1호
• /
• pp.107-110
• /
• 1982

Fixed bed drying method was selected to reduce the initial drying time of squid and the effects of drying air temperature and bed height on the drying rate were investigated, with following results. 1. The drying rate in the fixed bed dryer was faster than that of natural convection type dryer heated indirectly and that of hot air dryer heated directly. 2, Shirai-equation was applicable to squid being dried. Using the equation, drying rate constant obtained was as shown in table 1.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.238-243
• /
• 2004

High temperature air blown gasification is new concept to utilize the waste heat from gasifier that is called the multi-staged enthalpy extraction technology. This process was developed to solve the economic problem due to air separation cost for the oxygen-blown as a gasifiying agent. In this study, we have performed the construction of pebble bed gasifier and operated it by controlling the pebble size and bed height. As a result, we can produce the syngas with the calorific value of 700kcal/$Nm^3$ at the condition of air temperature 650$^{\circ}C$.

• 태양에너지
• /
• 제12권1호
• /
• pp.95-102
• /
• 1992

후레넬렌즈(면적 $0.5m^2$)에 의해서 고밀도 집광능력을 갖는 소형태양 집열시스템이 태양에너지 집열장치와 소형 유동층 태양광 수열장치로서 개발되었다. 유동층 수열장치에서의 성능과 온도분포는 SiC 입자와 공기를 작동유체로 하여서 측정하였다. 본 연구에서는 공기 최대도달 온도는 1250K이었다. 또한 개발한 태양에너지 집열기와 유동층 수열장치에 대한 에너지 효율은 높았다.

• 한국작물학회지
• /
• 제22권2호
• /
• pp.32-36
• /
• 1977

조생통일을 공시하여 파종후 3~4시간 태양열을 조사시켜 간역출아시키는 방법에 관한 시험 및 육묘상내의 온도를 달리하여 묘소질에 미치는 영향을 1977년 작물시험장 인공기상실 및 답작포장에서 검토한 결과 1. 간역출아방법은 간역출아기간중의 상토온도가 3$0^{\circ}C$부터 2$0^{\circ}C$까지의 범위로 유지된 창고 및 옥외 비닐+거적피복한 처리에서 출아가 균일하였다. 2. 간역출아기간중에 주간 47$^{\circ}C$, 야간 12$^{\circ}C$로 온도교차가 큰 옥외 비닐만 피복처리한 구에서는 출아상태가 불량하였다. 3. 인공기상실내에시 실시한 육묘상내온도는 육묘기에서 32$^{\circ}C$로 출아시킨후 연화기에 주간 $25^{\circ}C$, 야간 2$0^{\circ}C$, 경화기는 주간 2$0^{\circ}C$, 야간 15$^{\circ}C$ 온도처리에서 묘가 강건하였고 묘소질이 양호하였다. 4. 연화기부터 경화기까지 주간 3$0^{\circ}C$, 야간 15$^{\circ}C$의 고온처리구에서는 묘령은 현저히 증가하였으나 과번무상태가 되여 묘소질이 불량하였다. 5. 포장시험에서 실시한 육묘상보온방식에 따른 상내온도는 이중비닐턴넬시와 이중비닐턴넬후 야간거적피복처리구가 관행 비닐턴넬시에 비하여 최저온도가 3~5$^{\circ}C$높았으며 묘소질도 양호하였다.

• 한국환경복원기술학회지
• /
• 제6권3호
• /
• pp.29-34
• /
• 2003

This paper describes the effects of sewage amount, temperature, and years in operation on the infiltration rate of a sewage disposal system. The self-purifying sewage disposal system, which is typically used in rural areas, consists of reeds and fine gravel. Water plants are planted on the gravel bed which provides the habitat for microbes. The basic process is that the gravel bed filters incoming sewage. Thus this system requires the smooth flow of sewage through the gravel. However, the efficiency of the disposal system will be lowered if the gravel bed is clogged with sewage sludge. A three year study shows that infiltration rate slows down significantly until the 7th day, depending on the sewage amount and the temperature. After the 7th day, the infiltration rate remains almost constant. In addition, the infiltration rate decreases as the temperature falls. It also decreases as the number of years in operation increase. But there is no significant change in the infiltration rate after the 7th day, independent of the temperature, the sewage amount, and years in operation. In order to take advantage of high infiltration rate, which improves the efficiency of the disposal system in its early stages, having two gravel beds and using them alternatively will be efficient. This operation method is called intermittent load and makes the disposal system last longer. The water plant roots above the gravel bed make the effective filtration possible because they delay accumulation of the sewage sludge and stabilize the filtration ability.

• 공업화학
• /
• 제10권8호
• /
• pp.1200-1209
• /
• 1999

무수프탈산 생산 공정의 조업 조건에서 실측한 이중 고정층 촉매 반응기의 온도분포, 수율 및 냉매의 입출구 온도에 대한 최적 적합으로부터 최적 매개변수 값을 추정함으로써 예측 모델을 구성하였다. 최대 전화율과 수율을 얻을 수 있는 고정층 촉매 반응기를 설계하기 위하여 반응기 길이 및 반경을 변화시켜 그 영향을 고찰하였다. 활성이 균일한 단일 고정층 촉매 반응기의 경우, 반응기 반경 r =0.01241 m에서 전 촉매층 길이 z =2.8 m, 그리고 이중층 반응기의 경우, 반응기 반경 r = 0.01254 m에서 전 촉매층 길이 2,80 m(상부촉매층: 1.88 m, 하부촉매층: 0.92 m)에서 우수한 성능을 보였다. 반응기 반경 변화의 경우, 반경 증가는 냉매로의 열전달 시간의 지연에 의해 열점 온도가 상승하였으며, 반경의 감소는 그 반대의 결과를 보였다.

• 한국환경보건학회지
• /
• 제24권1호
• /
• pp.38-46
• /
• 1998

This study was to investigate the effects of carbon loadings, temperature and expansion ratio on the waterborne organic removal by the biologically active GAC fluidized bed on a laboratory scale. The raw water to be treated comes from midstream of Han river. BACFB(Biological Activated Carbon Fluidized Bed) process was very effective to remove the biodegradable fraction of dissolved organic matter. The more carbon weighed, the more DOC removed in a range from 16.7 to 133.3 g/l. DOC and UV$_{254}$ were removed more than 40% and 20% above 20$\circ$C respectively. Between 5$\circ$C and 10$\circ$C, DOC and UV$_{254}$ were eliminated about 30% and 15% respectively. In general, even if the temperature was higher, DOC removal was a little sensitive, probably influenced by GAC's residual adsorption capacity. UV$_{254}$ reduction was little fluctuated in accordance with water temperature. The gradual increase in expansion ratio from 10% to 75% didn't greatly affect on the removal of DOC and UV$_{254}$. The expansion ratio, therefore, is not a key factor over the critical expansion ratio.

• 설비공학논문집
• /
• 제27권3호
• /
• pp.146-151
• /
• 2015

The heat transfer performance of heating medium oil fluidized bed heat exchanger was measured. The operation variables were air flow rate, air inlet temperature, moisture content, water flow rate and water inlet temperature. The outside heat transfer coefficient was determined from the heat exchanger experiment and its experimental correlation was determined as a function of air velocity and viscosity of heating medium oil. Effect of viscosity was well agreed with the previous studies. Errors of the correlation equation was less than about 10% for outside heat transfer coefficient developed in this study when compared with the measured value. Hot water with the temperature greater than $77^{\circ}C$ could be produced by using the heating medium oil fluidized bed heat exchanger.

• 한국수소및신에너지학회논문집
• /
• 제27권2호
• /
• pp.163-168
• /
• 2016

Korea has been developing nuclear fusion fuel storage and delivery system (SDS) technologies including a basic scientific study on hydrogen storage. To develop nuclear fusion technology, it is necessary to store and supply hydrogen isotopes needed for Tokamak operation. SDS is used for storing hydrogen isotopes as a metal hydride form. The rapid hydriding of tritium is very important not only for safety reasons but also for the economic design and operation of the SDS. In this study, we designed and fabricated a medium-scale getter bed of depleted uranium (DU). The hydriding of DU has been measured by varying the initial temperature ($100-300^{\circ}C$) of the DU getter bed to investigate the influence of the cooling temperature. Furthermore, we analyzed the effect of a helium blanket on the hydriding performance with 0 - 12% helium content in hydrogen.