• 한국정밀공학회지
• /
• 제12권9호
• /
• pp.137-147
• /
• 1995

The unbalance response analysis is one of the essential area in the forced vibration analysis of rotor-bearing systems. Local bearing parameters in rotor-bearing systems are the major sources which give rise to a difficulty in unbalance response computation due to the complicated dynamic properties such as rotational speed dependency and anisotropy. In the present paper, an efficient method for unbalance responses is proposed so as to easily take into account bearing parameters in computation. An exact matrix condensation procedure is proposed which enables the present method to compute unbalance responses by dealing with condensed, small matrices. The proposed method causes no errors even though the computation procedure is based on the small matrices condensed from the full matrices. The present method is illustrated through a numerical example and compared with the conventional method.

• 동력기계공학회지
• /
• 제13권4호
• /
• pp.68-73
• /
• 2009

The mathematical model has a different response character with the real system because this mathematical model has the modeling errors and the imprecise value of system's parameters. Therefore to find the value of system parameters as possible as near by real value in the model is necessary to design the controlled system. This study concern about the identification method to estimate the parameter for the magnetic bearing system with RCGA(Real Coded Genetic Algorithm). Firstly, we will get the mathematical model from the current amplifier circuit and the magnetic bearing system. Secondly we will get the step response data in this circuit and system. Finally, we will estimate the unknown parameter's value from the data.

• 한국기계가공학회지
• /
• 제13권5호
• /
• pp.35-42
• /
• 2014

The influence of sine wave striated surface roughness on load carrying capacity of a bearing is studied for thin film effect of slider bearing. A Reynolds equation appropriate for slider bearing is used in this paper for analysis and it is discussed using finite difference method of central difference scheme. For a slider bearing with sine wave simple roughness form, several parameters such as pressure, load capacity and shear stress of the bearing can be obtained and also this results can be stored in sequential data file for latter analysis. After all, their distribution can be displayed and analyzed easily by using the matlab GUI technique. The parameters such as amplitude, number of waviness and slope of the surface are used for discussing the load carrying capacity of the rectangular bearing. The results reported in this paper should be applied to the other slider bearing such as rectangular or round embossed surface of slider bearing.

• 한국유체기계학회 논문집
• /
• 제19권5호
• /
• pp.35-41
• /
• 2016

This paper deals with the design, manufacturing and test evaluation of a hydrostatic bearing applied to a hydraulic model turbine. The design parameters of a hydrostatic bearing, considering machining and assembly tolerances, and recommended values of design parameters are presented. Also the simple design procedure of a hydrostatic bearing by utilizing the reference results is proposed. In order to illustrate the utility and validity of the proposed design procedure, two hydrostatic bearings are manufactured and test evaluation of these bearings are performed. In results, the proposed design procedure can be utilized as an effective tool at the initial design screen of a hydrostatic bearing. However, the 2D bearing governing equation should be solved to obtain the optimal design of a hydrostatic bearing.

• 소음진동
• /
• 제6권1호
• /
• pp.71-82
• /
• 1996

The finite element analysis for rotor bearing systems has been an essential tool for design, identification, and diagnosis of rotating machinery. Among others, the unbalance response analysis is fundamental in the vibration analysis of rotor bearing systems because rotating unbalance is recognized as a common sourve of vibration in rotating machinery. However there still remains a problem in the aspect of computational efficiency for unbalance response analysis of large rotor bearing systems. Gyroscopic terms and local bearing parameters in rotor bearing systems often make matters worse in unbalance response computation due to the complicated dynamic properties such as rotational speed dependency and/or anisotropy. The present paper proposes an efficient method for unbalance responses of multi-span rotor bearing systems. An improved substructure synthesis scheme is introduced which makes it possible to compute unbalance responses of the system by coupling unbalance responses of substructures that are of self adjoint problem with small order matrices. The present paper also suggests a scheme to easily deal with gyroscopic tems and local, coupling or bearing parameters. The proposed method causes no errors even though the computational effort is reduced drastically. The present method is demonstrated through three test examples.

• 대한족부족관절학회지
• /
• 제15권3호
• /
• pp.159-164
• /
• 2011

Purpose: This study was performed to analyze the results of radiologic parameters between weight bearing affected single ankle anteroposterior (AP) view and both ankle AP view in ankle osteoarthritis (OA). Materials and Methods: Between January 2009 and August 2010, 41 patients (50 ankles) who visited our institution to treat ankle OA were reviewed retrospectively. In radiographic assessment, weight bearing affected single ankle AP view and both ankle AP view were checked, and measured tibial anterior surface angle (TAS), tibial medial malleolar angle (TMM), talar tilting angle (TT), maximum and minimun joint space width (JSW) of ankle, width between articular surface of medial malleolar and medial articular surface of talus as radiologic parameters. Results: On weight bearing both ankle AP view, TAS was $85.4{\pm}4.1^{\circ}$, TMM was $33.1{\pm}9^{\circ}$, TT was $5.4{\pm}6.1^{\circ}$, maximum JSW was $3.2{\pm}2.7$ mm, minimum JSW was $1.1{\pm}1.3$ mm, width between articular surface of medial malleolar and medial articular surface of talus was $1.8{\pm}1.8$ mm and on weight bearing affected ankle AP view, TAS was $85.3{\pm}3.9^{\circ}$, TMM was $34.3{\pm}10.9^{\circ}$, TT was $5.4{\pm}6.5^{\circ}$, maximum JSW was $3.2{\pm}2.7$ mm, minimum JSW was $1.1{\pm}1.3$ mm, width between articular surface of medial malleolar and medial articular surface of talus was $1.6{\pm}1.7$ mm. Conclusion: There is no statistical significance in radiologic parameters between weight-bearing affected single ankle AP view and both ankle AP view in ankle OA.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.94-100
• /
• 1997

The purpose of this study is to investigate the effects of operation factors of a typical main spindle system on its efficiency. Among important factors, material type of ball-bearing, bearing-lubricant type and main spindle bearing preload are taken into considered.

• Tribology and Lubricants
• /
• 제2권1호
• /
• pp.69-77
• /
• 1986

The motion of journal in a bearing is considered separately as rotation and translation, and then the equations of motion are derived. The bearing load capacities for these motions are calculated from the lubrication theory. The numeric integration of the equations of motion gives various journal orbit depending on force cycles and bearing parameters.

• 한국기계가공학회지
• /
• 제16권5호
• /
• pp.119-125
• /
• 2017

In this paper, the characteristics and load carrying capacity of square pocket surfaces on a slider bearing are discussed for the thin film effect by the square pocket slider bearing. To study the lubrication, a Reynolds equation is used in this paper for the analysis of the slider bearing characteristics with square pocket surfaces. For numerical analysis, the central differencing scheme finite difference method is used. In a slider bearing with square pocket surfaces, the simulation dependent parameters such as pressure and load carrying capacity of the bearing can be acquired from the independent parameters, the slope of the slider bearing and number of pockets on the upper slider. These results can be acquired by the programmed softwar,e and they can be analyzed and stored in a sequential data file for later analysis. Furthermore, their pressure and load capacity distribution can be displayed easily by using the developed program with the Matlab GUI.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.156-161
• /
• 1999

new bearing concept, the wave journal bearing, has been developed to improve the static and dynamic performances of an air-lubricated hydrodynamic journal bearing. This concept features waves on bearing surface. In this study, we present the solution of the compressible Reynolds equation valid for arbitrary Knudsen numbers. Straight wave journal bearing is investigated numerically. The performances of straight wave bearing are compared to the plain journal bearing over relatively wide range of bearing number and eccentricity. The wave journal bearing offers better stability than the plain journal bearing under a13 bearing numbers covered in this study. The bearing load and stability characteristics are dependent on the geometric parameters such as the amplitude and the starting point of the wave relative to the applied load. Under the condition of Knudsen number)0.01, we can not ignore the effect of slip for journal bearing.