• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.1
• /
• pp.63-68
• /
• 2011

Many countries all over the world have been doing lunar exploration projects. Korea has also been doing basic research on lunar exploration. The development of communication systems for lunar exploration projects is one of the most important aspects of performing a successful lunar mission. In this paper, we design a DSP (Digital Signal Processor) prototype based on the requirement analysis of a communication link for lunar exploration and implement its core module considering the international standards for deep space communications to perform a basic research on baseband processor development. It is verified by comparing the bit error rate of the DSP prototype with that of a computer simulation.

• Journal of the Korean Society for Railway
• /
• v.11 no.1
• /
• pp.69-74
• /
• 2008

This paper presents the design and implementation of MIB for SNMP-based PLC system which is applicable to communication for railway vehicles. The proposed MIB has four nodes which are "Basic Information", "Configuration", "Stats", and "Alarm." The essential peripheral functions for "Alarm" to improve the performance of PLC are deyised. ACF is for auto connecting devices without intervention of the user. DEC is for checking the loss of data and the presence of error. DLPF is for preventing the loss of data and error To evaluate the proposed system, the experimental set-up is developed and the experiments are successfully carried out. The conclusion points out that the suggested MIB contributes the betterment of the conventional PLC systems.

• Journal of the Korean School Mathematics Society
• /
• v.16 no.2
• /
• pp.435-457
• /
• 2013

The purpose of this paper is to discover effective teaching and learning methods for improving low level mathematic matriculants', who passed the early decision program, problem solving abilities by analyzing their error patterns in the special lecture for basic mathematics in P University. In this paper, we examine the matriculants' understanding and errors on the fundamental concepts of function, and continuity and differentiability of function based on the pre-examination. We also measure the their academic achievement in the special lecture for basic mathematics, and analyze the differences of error patterns between pre-test and post-test result on the concepts of continuity and differentiability of function.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.1
• /
• pp.396-413
• /
• 2017

Dynamically checking the integrity of software at run-time is always a hot and difficult spot for trusted computing. Control-flow integrity is a basic and important safety property of software integrity. Many classic and emerging security attacks who introduce illegal control-flow to applications can cause unpredictable behaviors of computer-based systems. In this paper, we present a software-based approach to checking violation of control flow integrity at run-time. This paper proposes a high-performance and low-overhead software control flow checking solution, control flow checking at virtual edges (CFCVE). CFCVE assigns a unique signature to each basic block and then inserts a virtual vertex into each edge at compile time. This together with insertion of signature updating instructions and checking instructions into corresponding vertexes and virtual vertexes. Control flow faults can be detected by comparing the run-time signature with the saved one at compile time. Our experimental results show that CFCVE incurs only 10.61% performance overhead on average for several C benchmark programs and the average undetected error rate is only 9.29%. Compared with previous techniques, CFCVE has the characteristics of both high fault coverage and low memory and performance overhead.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.5
• /
• pp.1829-1846
• /
• 2021

Transient faults occur in computation units of a processor, which can cause control flow errors (CFEs) and compromise system reliability. The software-based methods perform illegal control flow detection by inserting redundant instructions and monitoring signature. However, the existing methods not only have drawbacks in terms of performance overhead, but also lack of configurability. We propose a configurable approach CCFCA for detecting CFEs. The configurability of CCFCA is implemented by analyzing the criticality of each region and tuning the detecting granularity. For critical regions, program blocks are divided according to space-time overhead and reliability constraints, so that protection intensity can be configured flexibly. For other regions, signature detection algorithms are only used in the first basic block and last basic block. This helps to improve the fault-tolerant efficiency of the CCFCA. At the same time, CCFCA also has the function of solving confusion and instruction self-detection. Our experimental results show that CCFCA incurs only 10.61% performance overhead on average for several C benchmark program and the average undetected error rate is only 9.29%. CCFCA has high error coverage and low overhead compared with similar algorithms. This helps to meet different cost requirements and reliability requirements.

• ETRI Journal
• /
• v.27 no.3
• /
• pp.312-318
• /
• 2005

Mid-span spectral inversion (MSSI) has to utilize high optical pump power, for its operation principle is based on a nonlinear optical wavelength conversion. In this paper, a low pump-power operation of MSSI-based chromatic dispersion compensation (CDC) has been achieved successfully, for the first time to our knowledge, by introducing a noise pre-reduction scheme in cascaded wavelength conversions with periodically poled $LiNbO_3$ waveguides at a relatively low operation temperature. As preliminary studies, phase-matching properties and operation-temperature dependence of the wavelength converter (WC) were characterized. The WC pumped at 1549 nm exhibited a wide conversion bandwidth of 59 nm covering the entire C-band and a conversion efficiency of -23.6 dB at 11 dBm pump power. CDC experiments were implemented with 2.5 and 10 Gb/s transmission systems over 100 km single-mode fiber. Although it is well-known that the signal distortion due to chromatic dispersion is not critical at a 2.5 Gb/s transmission, the clear recovery of eye patterns was identified. At 10 Gb/s transmission experiments, eye patterns were retrieved distinctly from seriously distorted ones, and notable improvements in bit-error rates were acquired at a low pump power of 14 dBm.

• The Journal of Korean Association of Computer Education
• /
• v.8 no.2
• /
• pp.1-10
• /
• 2005

Presently, elementary school students take coercive action in case error or fault happens while they are using computers. These action are caused by lack of comprehension about basic computer concepts. In this paper, we propose an instructional method for basic computer concepts based on various instructional method. To estimate the effect of proposed method, a class over 16 phases is performed. We show that a effect of class and necessity of development of instructional learning method for basic computer concepts education in elementary schools on the basis of result that analyze reaction of students after class.

• Communications for Statistical Applications and Methods
• /
• v.19 no.3
• /
• pp.315-331
• /
• 2012

In this research, we estimated the number of hits per song and its sampling error from 11 (areas including Gangnam) based on log data compiling the number of hits collected from offline karaoke players in March 2011. Then, we calculated the monetary equivalent of the sampling error under the current system that distribute royalties from the karaoke players to copyright holders(song writers and arrangers) according to the estimated hits. Because of the small sample size, the estimated number of hits had a very large sampling error. This research proposes a more reasonable sample design to estimate the usage of copyrighted music works for a fair distribution of royalties by reducing sampling error.

• Journal of the military operations research society of Korea
• /
• v.2 no.1
• /
• pp.163-176
• /
• 1976

The artillery fire is characterized by great damage that can be inflicted simultaneously to an area through concentrated firing. The field artillery guns used in R.O.K. Army are generally old. Thus high values of their velocity errors cause wide dispersion of shell landings. Therefore effects of the concentrated firing is lessened. In this paper a general model which considers all error factors involved in firing in general, is established first. Then from this a basic model which includes the errors involved in concentrated firing only, such as the ballistic error, velocity error, target density function, and damage function, is extracted. Among many weapon systems now in use a specific one called gun 'A' is selected and its concentration effects are measured through computer simulation. The results show that as the velocity error of a battery increases, its target coverage capability, i. e. concentration effect, decreases. Therefore the need arises for the field artillery commander to know beforehand characteristics, i.e. velocity errors, of the guns in his unit and also to carefully examine the problem of battery arrangement with the gun characteristics in mind in order to maximize the damage effects of his artillery unit.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.4
• /
• pp.601-613
• /
• 2017

An adjoint-based error estimation and mesh adaptation study is conducted for two-dimensional viscous flows on unstructured hybrid meshes. The error in an integral output functional of interest is estimated by a dot product of the residual vector and adjoint variable vector. Regions for the mesh to be adapted are selected based on the amount of local error at each nodal point. Triangular cells in the adaptive regions are refined by regular refinement, and quadrangular cells near viscous walls are bisected accordingly. The present procedure is applied to single-element airfoils such as the RAE2822 at a transonic regime and a diamond-shaped airfoil at a supersonic regime. Then the 30P30N multi-element airfoil at a low subsonic regime with a high incidence angle (${\alpha}=21deg.$) is analyzed. The same level of prediction accuracy for lift and drag is achieved with much less mesh points than the uniform mesh refinement approach. The detailed procedure of the adjoint-based mesh refinement for the multi-element airfoil case show that the basic flow features around the airfoil should be resolved so that the adjoint method can accurately estimate an output error.