• 대한치과기공학회지
• /
• 제7권1호
• /
• pp.53-59
• /
• 1985

This paper aims to examine baes metal alloy in all its aspects - the roles of elements, the content of every element according to uses, characters, laboratory technique methods and the kind of artificial base metal alloy registered in A.D.A. Specification. The results are as follows; 1. Base metal alloy is used widely bacaues it is rather cheap, but it should be handled appropriately in operating because its quality is bad. 2. Classifying base metal alloy, it is classified into Co-Cr alloy, Ni-Cr alloy, and Ni-Cr-Co alloy according to element, it is classified into partial denture alloy, surgical alloy and crown & bridge alloy according to use. 3. Among elements of base metal alloy, Bellium lowers the melting point of the alloy and increases the strength, but the amount should be limited when it is used because it destroys the organization of a living body. 4. The investments for base metal alloy are ethyl silcate bonded investment and phosphate bonded investment which endure well at high burn out temperature. 5. A.D.A specification No.14 in Kore contains Niranium, Nobilium, regalloy, Ticonium and Vitallium.

• Structural Monitoring and Maintenance
• /
• 제4권1호
• /
• pp.17-31
• /
• 2017

Since extensometers are used to determine the absolute deformation of foundation and abutments and all results are obtained in reference to the base rod, the accuracy of these results has been constantly a subject of debate. In this regard, locating and installing extensometers outside the range of effect zone is also another challenge. The main purpose of this paper is to investigate and modify extensometers results based on the mentioned issues. For this aim, the concrete RCC Zhaveh dam in Iran was selected as the case study. To study the results of extensometers installed in this dam, first, the 3DEC_DP 5.00 software was applied for numerical modeling. Parameters such as discontinuities, dead load and piezometric pressure in the interface of concrete and rock were considered. Next, using the results obtained from 6 extensometers in foundation and abutments and 4 clinometers in dam body, the numerical model was calibrated through back analysis method. The results indicate that the base rod is moved and is not recommended being used as the base point. In other words, because installation of base anchor outside the range of effect zone is not possible due to the operational and economic considerations, the obtained results are not accurate enough. The results indicate a considerable 2-3 mm displacement of the base rod (location of the base anchor) in reference to the real zero point location, which must be added to the base rod results.

• 한국전자파학회논문지
• /
• 제23권1호
• /
• pp.14-20
• /
• 2012

셀룰러 이동 통신 시스템에서 협력적으로 신호를 전송하는 CoMP(Coordinated Multi-Point transmission and reception) 방식은 기지국 간 간섭을 매우 효과적으로 제어하여 시스템의 전송률을 증가시킨다. 그러나 협력적 전송에 참여하는 기지국의 개수가 증가할수록 기지국 간 공유가 요구되는 채널 상태 정보 및 전송 데이터의 교환으로 인한 오버헤드가 비약적으로 증가하는 문제를 발생시킨다. 본 논문에서는 제한적 궤환량을 고려하여 전송 효율이 높은 기지국들만을 협력적 전송에 참여시키는 부분적 CoMP 전송 방식을 제안한다. 이를 위해 시스템 내 코어 망은 사용자가 선호하는 기지국 정보를 반영하여 협력 기지국 조합을 구성한다. 또한, 사용자들의 채널 환경에 따라 선호하는 협력 기지국 조합이 상이할 수 있으므로 코어 망은 구성된 협력 기지국 조합을 다이나믹하게 변형하여 적용한다. 컴퓨터 시뮬레이션을 이용하여 제한적 궤환량 사용 시 기존의 비협력적 기지국 전송 방식과 협력적 기지국 전송 방식과의 평균 전송률 성능을 비교하고, 이를 통해 제안 방식의 우수성을 입증한다.

• 한국정밀공학회지
• /
• 제23권9호
• /
• pp.200-207
• /
• 2006

In this paper a new approach which combines implicit surface scheme and NURBS surface interpolation method is proposed in order to generate a complete surface model from unorganized point cloud data. In the method a base surface was generated by creating smooth implicit surface from the input point cloud data through which the actual surface would pass. The implicit surface was defined by a combination of shape functions including quadratic polynomial function, cubic polynomial functions and radial basis function using adaptive domain decomposition method. In this paper voxel data which can be extracted easily from the base implicit surface were used in order to generate rectangular net with good quality using the normal projection and smoothing scheme. After generating the interior points and tangential vectors in each rectangular region considering the required accuracy, the NURBS surface were constructed by interpolating the rectangular array of points using boundary tangential vectors which assure C$^1$ continuity between rectangular patches. The validity and effectiveness of this new approach was demonstrated by performing numerical experiments for the various types of point cloud data.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1986년도 춘계학술발표회 논문집
• /
• pp.113-118
• /
• 1986

Nowdays switching software designs are based on the concept of maximizing efficiency. This idea is to put through the most call, in the fastest time, using the fewest possible resources. So the memory usages are embossed one of the most important part to be considered in the switching software. This paper discusses the general concepts of switching software at first, then describes the switching data base from the view point of the access time, memory efficiency, and call processing environment.

• Asian Pacific Journal of Cancer Prevention
• /
• 제14권2호
• /
• pp.1155-1157
• /
• 2013

Cancer is a highly complex medical problem with ramifications for public health throughout the world. Most studies have mainly focused on change in the nuclei as being aetiologically responsible. Few have examined the relationship between the cytoplasm and cancer, despite the fact that research has indicated that the cytoplasmic environment is an important factor for cellular differentiation and that the genetic information provided by the nucleus is entirely dependent on this environment for its expression. Gene mutations may be the result, rather than the cause of carcinogenesis. We submit a new concept - "short base sequences" (50-500 bps, including DNA or RNA sequences) in the cytoplasm which could play an important role in carcinogenesis. This is a new theory to explain the origin of the cancer.

• 융합신호처리학회논문지
• /
• 제12권2호
• /
• pp.139-144
• /
• 2011

The modern digital logic technology does not yet satisfy the speed requirements of real-time DSP circuits due to synchronized operation of multiplication and accumulation. This operation degrades DSP performance. Therefore, the double-base number system (DBNS) has emerged in DSP system as an alternative methodology because of fast multiplication and hardware simplicity. In this paper, authors propose a novel multiplication architecture. One operand is an output of a flash analog-to-digital converter (ADC) in DBNS format, while the other operand is a coefficient in the IEEE standard floating-point number format. The DBNS digital output from ADC is produced through a new double base number encoder (DBNE). The multiplied output is in the format of the IEEE standard floating-point number (FPNS). The proposed circuits process multiplication and conversion together. Compared to a typical multiplier that uses the FPNS, the proposed multiplier also consumes 45% less gates, and 44% faster than the FPNS multiplier on Spartan-3 FPGA board. The design is verified with FIR filter applications.

• 대한치과기공학회지
• /
• 제25권1호
• /
• pp.71-79
• /
• 2003

The purpose of this study was to investigate bond strength of denture base resin repaired according to contamination. One commercial denture base resin and two different kinds of relines resin were tested; Lusiton 199(denture base resin), Vertex(reline resin) and TokusoRebase(repair resin). The specimens were processed according to the manufacturer's instructions to cured denture base resin(polymethylmethacrylate; PMMA) and reline resin. Bond strengths were examined by use of a three-point transverse flexural strength test. Data were analyzed with two-factor analysis of variance and Duncan's post-hoc test at $\alpha$=0.05. Generally, the bondstrength of heat-cured resin(Lusiton 199) was higher than the other resins. The contaminations produced an decrease in bond strength. Therefore the contamination, such as saliva or water must be avoided during the laboratory repair procedures.

• 한국군사과학기술학회지
• /
• 제27권1호
• /
• pp.31-42
• /
• 2024

In this study, the methodology of determination of base bleed motor data for base bleed projectile based on the NATO standard trajectory model, especially STANAG 4355 Method 2 were presented. Ground combustion experiments and aerodynamic performance firing tests were conducted to determine the drag reduction motor data of the base bleed projectile and this data was described based on the NATO standard ballistic model. The derived drag reduction motor data were input into the ballistic equations to complete the ballistic model and it was confirmed that the calculated predicted trajectory from the ballistic model matched well with the measured trajectory from the aerodynamic performance firing tests.

• Strategy21
• /
• 통권39호
• /
• pp.140-162
• /
• 2016

The construction of Jeju Naval Base was finally completed and donated to the Republic of Korea Navy on February 26th this year. There is no doubt that the new base will contribute to the substantial augmentation of Korea's naval power and maritime security. However, we should note that the new naval base took a long and hard twenty-three years to be completed. In the 21st century, Korea should adopt a new strategy that can fulfill the security requirements of Korea for the new age of international relations. The 21st century is characterized by globalization, and in the world of globalization, a national boarder has become meaningless. In the late 20th century, after the Cold War, trade between countries have greatly increased and so did the importance of the seas. Having transformed from an agricultural country into a commercial country, Korea went from a continental state to a maritime state. Korea has become the 9th largest trading state, and obviously, the importance of the sea has become significant. Korea's national strategic focus needs to be on the sea for national survival. Thus, since the 1990s, the Korean Navy has planned to build the Jeju Naval Base. Jeju, due to its geopolitical characteristics, is extremely important to the 21st century Korea's economy and national security. Jeju is the starting point of the sea route that reaches out to the world, and at the same time, the ending point of the sea route that heads towards Korea. Jeju is located in the center of Northeast Asia and thus, Jeju Naval Base is extremely important for the area's security and order. Jeju Naval Base will be very useful not only for the maritime security of Korea, but also for keeping peace and order in Northeast Asia. Jeju Naval Base was the minimal effort against the six sea route security threats towards Korea. The six sea route threats are: 1) Threat from North Korea; 2) China's Threat towards Korea's sovereignty; 3) China's treat towards Korea's fishery; 4) Threat from Japan; 5) Threat towards Korea's sea routes; 6) Threat from recent phenomena of isolationism of the United States. Jeju Naval Base is built for both warships and civilian ships--such as cruise ships--to use. Just like the United States' Pearl Harbor, Jeju Naval Base will become not only the largest military base, but a beautiful tourist site.