• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.6
• /
• pp.84-92
• /
• 2005

This paper is concerned with optimum design of a center-pillar assembly induced by the high-speed side impact of the vehicle. In order to simulate deformation behavior of the center-pillar assembly, simplified finite element model of the center-pillar and a moving deformable barrier are developed based on results of the crash analysis of a full vehicle model. In optimization of the deformation shape of the center-pillar, S-shaped deformation is targeted to guarantee reduction of the injury level of a driver dummy in the crash test. Tailor-welded blanks are adopted in the simplified center-pillar model to control the deformation shape of the center-pillar assembly. The thickness of each part which constitutes the simplified model is selected as a design parameter. The thickness of parts which have significant effect on the deformation mechanism are selected as design parameters with sensitivity analysis based on the design of experiment technique. The objective function is constructed so as to minimize the weight and lead to an S-mode deformation shape. The result shows that the simplified model can be utilized effectively for optimum design of the center-pillar members with remarkable saving of computing time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.229-234
• /
• 1999

We analyzed the reliability characteristics in platinum schottky diodes with variations of n-type silicon substrates concentrations and temperature variations of measurements. The parameters of reliability measurement analysis are saturation current. turn-on voltage and ideality factor in the forward bias, the breakdown voltage in the reverse bias with device shapes. The shape of devices are square type and long rectangular type for edge effect. As a result, we analyzed that the forward turn-on voltage, barrier height, dynamic resistance and reverse breakdown voltage were decreased but ideality factor and saturation current were increased by increased concentration in platinum and n-silicon junction parts. In measurement temperature(RT, $50^{\circ}C$, $75^{\circ}C$), the extracted electrical parameter values of reliability characteristics were increased at the higher temperature under the forward and reverse bias. The long rectangular type devices were more decreased than the square type in reverse breakdown voltage by tunneling effects of edge part.

• Journal of Plant Biotechnology
• /
• v.37 no.4
• /
• pp.567-573
• /
• 2010

To ascertain the effect of over-expressed maize calreticulin in tomato plant on tobamovirus movement in addition to validating potentiality of the gene (ZmCRT) as a means for the virus-resistance resource, four ZmCRT-expressing homozygous lines were generated from the T0 plants as using an Agrobacterium-mediated transformation, nucleic acid analyses, and a conventional breeding method. Of them, a line was subjected to the bioassay for tolerances to tobacco mosaic virus-U1 (TMV-U1) and tomato mosaic virus (ToMV) followed by RT-PCR and a chlorophyll fluorescence quenching analyses. Both transgenic plants transcribing ZmCRT and wild-type plants showed no symptom by 20 days after viruses inoculation, however the photosystem II quantum yield parameter measured from the upper leaves of ToMV-inoculated plants revealed that ZmCRT transgenic plants have higher photosynthetic ability than wild-type ones at that time, which indirectly implies that over-expressed ZmCRT product acts as a barrier to the cell-to-cell and/or systemic movement of ToMV. Moreover, ZmCRT transgenic plants showed remarkably longer shoot length than wild-type ones in 40 days after TMV-U1 or ToMV inoculation each, which might be resulted from higher photosynthetic ability during the phase not yet showing any external symptoms. Collectively, over-expressed ZmCRT protein in tomato plants is able to interrupt the systemic movement of infected TMV-U1 and ToMV even though not perfect.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.63-75
• /
• 2012

This paper gives some basic requirements and preferences of various geological environmental conditions for the final deep geological repository of spent nuclear fuel (SNF). This study also indicates how the requirements and preferences are to be considered prior to the selection of sites for a site investigation as well as the final disposal in Korea. The results of the study are based on the knowledge and experience from the IAEA and NEA/OECD as well as the advanced countries in SNF disposal project. This study discusses and suggests preliminary guideline of the disposal requirements including geological, mechanical, thermal, hydrogeological, chemical and transport properties of host rock with long term geological stabilities which influence the functions of a multi-barrier disposal system. To apply and determine whether requirements and preferences for a given parameter are satisfied at different stages during a site selection and suitability assessment of a final disposal site, the quantitative criteria in each area should be formulated with credibility through relevant research and development efforts for the deep geological environment during the site screening and selection processes as well as specific studies such as productions of safety cases and validation studies using a generic underground research laboratory (URL) in Korea.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.495-504
• /
• 2015

This work investigated the characteristics of a packed-bed plasma reactor system and the performances of the plasma reactors connected in series or in parallel for the decomposition of ethylene. Before the discharge ignition, the effective capacitance of the ${\gamma}$-alumina packed-bed plasma reactor was larger than that of the reactor without any packing, but after the ignition the effective capacitance was similar to each other, regardless of the packing. The energy of electrons created by plasma depends mainly on the electric field intensity, and was not significantly affected by the gas composition in the range of 0~20% (v/v) oxygen (nitrogen : 80~100% (v/v)). Among the various reactive species generated by plasma, ground-state atomic oxygen and ozone are understood to be primarily involved in oxidation reactions, and as the electric field intensity increases, the amount of ground-state atomic oxygen relatively decreases while that of nitrogen atom increases. Even though there are many parameters affecting the performance of the plasma reactor such as a voltage, discharge power, gas flow rate and residence time, all parameters can be integrated into a single parameter, namely, specific input energy (SIE). It was experimentally confirmed that the performances of the plasma reactors connected in series or in parallel could be treated as a function of SIE alone, which simplifies the scale-up design procedure. Besides, the ethylene decomposition results can be predicted by the calculation using the rate constant expressed as a function of SIE.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.21 no.6
• /
• pp.444-452
• /
• 2009

Textural parameters were calculated from the surface sediments collected from Jinu-do beach in Nov. 2005 and May 2006. In Nov. 2005 and May, 2006, the grain size distribution of surface sediments shows that the mode of $3.0\phi$(i.e., 0.125 mm) dominated the west beach of Jinu-do, but in the east beach the mode of $3.0\phi$(i.e., 0.125 mm) decreased and the mode of $2.5\phi$(i.e., 0.177 mm) was apparently distinct, resulting in the more coarsening trend. Mean grain size of surface sediments also indicates little difference in the west beach between two investigations, but the increasing difference between mean grain sizes in the east beach, showing more coarsening pattern. Such seasonal pattern corresponds to the positive skewness in the east beach in May, 2006. As a result, after the winter in 2005, the surface sediments in the west beach of Jinu-do experienced a little variation, whereas the apparent coarsening of surface sediments occurred in the east beach by removal of $3.0\phi$(i.e., 0.125 mm) fine-grained sand particles. The observed seasonal change may be attributed to the different hydrographic condition and sediment delivery/removal on the surface sediments between the west beach and the east beach of Jinu-do through the increased precipitation and more freshwater discharge from the Nakdong River during the summer and the intensified wave and tide during the winter in the Nakdong River estuary.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.85-90
• /
• 2012

In this paper, we compared and analyzed 3D silicon-oxide-nitride-oxide-silicon (SONOS) multi layer flash memory devices fabricated on nitride or oxide layer, respectively. The device fabricated on nitride layer has inferior electrical properties than that fabricated on oxide layer. However, the device on nitride layer has faster program / erase speed (P/E speed) than that on the oxide layer, although having inferior electrical performance. Afterwards, to find out the reason why the device on nitride has faster P/E speed, 1/f noise analysis of both devices is investigated. From gate bias dependance, both devices follow the mobility fluctuation model which results from the lattice scattering and defects in the channel layer. In addition, the device on nitride with better memory characteristics has higher normalized drain current noise power spectral density ($S_{ID}/I^2_D$>), which means that it has more traps and defects in the channel layer. The apparent hooge's noise parameter (${\alpha}_{app}$) to represent the grain boundary trap density and the height of grain boundary potential barrier is considered. The device on nitride has higher ${\alpha}_{app}$ values, which can be explained due to more grain boundary traps. Therefore, the reason why the devices on nitride and oxide have a different P/E speed can be explained due to the trapping/de-trapping of free carriers into more grain boundary trap sites in channel layer.

• Journal of Distribution Science
• /
• v.10 no.11
• /
• pp.79-88
• /
• 2012

Purpose - The objective of this paper is to suggest that a company's CRM activities have an effect on customer loyalty in the Korean retail industry. Typically, Korean customers use large local marts with convenience in the absence of any other choice. Therefore, this study aims to shed light on the fact that customers do not break away from their preferred retail stores, either owing to their stringent loyalty (the lie loyalty) or difficulty in turning to alternative choices. Research design, data, methodology - By surveying a sample of 200 hyper-markets through a questionnaire, and excluding dubious and missing responses, I obtained 181 samples to be included in the empirical analysis. The survey was conducted for two weeks during October 2011. AMOS and SPSS18 statistical packages were used for conducting statistical analysis for this study. This paper was developed using the concept of customer equity on CRM, which is known to have a positive impact on customer loyalty through the satisfaction and switching-barrier parameters. The hypothesis of this paper is that customer equity is composed of relationship equity, value equity and brand equity, and that the relationship equity variable has positive effects on the value equity and brand equity amongst other types of customer equity. Moreover, customer equity influences customer loyalty through parameters including customer satisfaction and switching costs in the Korean retail industry. Results - According to the results of the analysis, it was confirmed that relationship value had a positive effect (+) on all variables, including the perceived QoS (Quality of Service), store brand images, economic value, and store convenience. It was also confirmed that the assumption that the perceived QoS (Quality of Service), economic value, and store convenience had a positive effect on customer satisfaction was shown to be statistically significant, with a p-value below 0.05. Only the store brand value variable had an effect on the switching-cost variable with respect to the causal sequence of the variables, including the perceived QoS, store brand value, economic value, and store convenience. The remaining variables did not seem to influence the switching-cost variable. On the other hand, another effect showed that customer satisfaction had a statistically significant influence on the switching-costs variable. Moreover, the customer satisfaction and switching-cost variables also had a statistical influence on customer loyalty. Conclusions - The CRM activities had an influence on various variables (including perceived QoS, perceived economic value, store brand value, and store convenience) pertaining to customer values. Customer satisfaction and switching-cost had some effects on customer loyalty as a parameter. This confirms that stringent loyalty exists with respect to customer loyalty in the retail industry. The fact that the variable had such a statistically significant influence on the switching-cost and store brand equity variables means that consumers react to the reputation of a brand, confidence about the store, and quality confidence. The implications of this study in the retail industry should be further extended to devise strategies for customer retention.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.33 no.2
• /
• pp.99-104
• /
• 2007

The skin barrier function is one of the vital functions. Horny layer and epidermis among various skin layers play an important role in protecting body from environmental insults. Stratum corneum is completely formed by differentiation processes from the basal layer and newly formed corneocytes push the older ones from skin surface. In this study we investigated changes of various parameters - capacitance, transepidermal water loss (TEWL), pH and amount of removed corneocytes - according to the stratum corneum's depth. We removed the stratum corneum using tape stripping technique. We found that uppermost stratum corneum play an important role in skin surface moisturization and lower stratum corneum in protecting transepidermal water loss. In addition, skin pH is more acidic than surface pH. In the stratum corneum, skin pH is mote acidic in the deeper layer. Furthermore amount of removed corneocyte is also decreased according to depth because of stronger cell-cell union strength. From these results we suggest that stratum corneum has different characteristics depending on their position.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.3
• /
• pp.329-338
• /
• 2019

Suction of unsaturated bentonite buffers is a very important input parameter for hydro-mechanical performance assessment and design of an engineered barrier system. This study analyzed suction measurement techniques and constitutive models of unsaturated porous media reported in the literature, and suggested suction measurement techniques and constitutive models suitable for bentonite buffer in an HLW repository. The literature review showed the suction of bentonite buffer to be much higher than that of soil, as measured by total suction including matric suction and osmotic suction. The measurement methods (RH-Cell, RH-Cell/Sensor) using a relative humidity sensor were suitable for suction measurement of the bentonite buffer; the RH-Cell /Sensor method was more preferred in consideration of the temperature change due to radioactive decay heat and measurement time. Various water retention models of bentonite buffers have been proposed through experiments, but the van Genuchten model is mainly used as a constitutive model of hydro-mechanical performance assessment of unsaturated buffers. The water characteristic curve of bentonite buffers showed different tendencies according to bentonite type, dry density, temperature, salinity, sample state and hysteresis. Selection of water retention models and determination of model input parameters should consider the effects of these controlling factors so as to improve overall reliability.