• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.190-190
• /
• 2003

여러원소 (Sb, F 등)를 도핑한 SnO$_2$ 투명전도막은 여러 가지 훌륭한 특성으로 Solar cell, heat mirrors, gas sensors, liquid crystal displays, thick film resistor 등과 같이 넓은 범위에서 응용되고 있다. 본 연구에서는 Sb 도핑된 Tin Oxide films이 Sol-gel dip coating법에 의해 준비되었다. SnO$_2$:Sb 용액은 SnC1$_2$ 와 SbC1$_3$ Power를 알코올에 용해하여 Ethylene glycol 와 Citric acid를 첨가하여 합성하였다. 막의 상형성은 XRD와 SEM(Scanning electron microscope)에 의해서 분석되었으며, 특성분석은 투과율(UV/VIS Spectrophotometer)과 표면전기저항(four point probe)으로 분석되었다. SiO$_2$ barrier이 SnO$_2$:Sb 막의 특성에 미치는 영향을 확인하기 위하여 XPS(X-ray photoelectron spectroscopy) 분석이 적용되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.988-990
• /
• 2005

A 5.0-inch plastic TFT-LCD with the resolution of $400{\times}3{\times}300$ lines (120ppi) was developed. The device is a transmissive type with the transparent PES plastic substrates. The PES films with one side barrier coating were used for the device. In order to produce the high resolution display device, the alignments between all the layers for the TFT and CF are essential. The fundamental shrinkage effect and the thermal expansion behavior of the plastic substrates with and without the barrier coatings were studied. The proper annealing processes followed by immediate second bar-rier coating processes provide the optimal alignment between all the layers of the TFT and CF..

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.465-465
• /
• 2012

In this study, we developed an Al2O3 nanolaminated single gas barrier layer using a Neutral Beam Assisted Sputtering (NBAS) process. The NBAS process can continuously change crystalline structures from an amorphous phase to a nanocrystal phase with various grain sizes and lead to the formation of a nanolaminated structure in the single inorganic thin film. As a result, the water vapor transmission rates (WVTR) of the nanolaminated Al2O3 thin films by NBAS process have improved more than 40% compared with that of conventional Al2O3 layers by the RF magnetron sputtering process under the same sputtering conditions.

• 전자공학회논문지A
• /
• 제29A권8호
• /
• pp.49-55
• /
• 1992

We Have investigated the properties of the titanium nitrite films widely used in VLSI devices as diffusion barrier in Al-based metallization. TiN films were formed by reactive sputtering from Ti target in Ar-N$_2$ mixtures, varying deposition parameters such as N$_2$ partial pressure, substrate temperature, power, and total pressure. All the samples received the heat treatment at 45$0^{\circ}C$ for 30 min. The resulting films are characterized by mechanical stylus($\alpha$-step), x-ray diffraction(XRD), scanning electron microscopy(SEM), and four point probe method. The Tin film properties strongly depend on the deposition condition. The stoichiometry and Ti deposition rate are critically affected by nitrogen partial pressure, and the resistivity, in particular, is dependent on both the substrate temperature and sputtering power.

• Food Science and Biotechnology
• /
• 제15권6호
• /
• pp.925-930
• /
• 2006

Chitosan-based nanocomposite films were prepared using a solution intercalation method incorporating varying amounts of organically modified montmorillonite (Cloisite 30B) from 0 to 30 wt%. The nanocomposite films prepared were optically clear despite a slight decrease in the transmittance due to the spatial distribution of nanoclay. X-ray diffraction patterns indicated that a certain degree of intercalation or exfoliation formed when the amount of clay in the film was low and that microscale tactoids formed when the clay content in the sample was high (more than 10 wt%). The tensile strength (TS) of the chitosan film increased when the clay was incorporated up to 10 wt% and then decreased with further increases in the clay content of the film. The elongation at break (E) increased slightly upon the addition of low levels of clay up to 5 wt% and then decreased with further increases in the amount of the clay in the film. The water vapor permeability (WVP) decreased exponentially with increasing clay content. The water solubility (WS) and swelling ratio (SR) of the nanocomposite films decreased slightly, indicating that the water resistance of the chitosan film increased due to the incorporation of the nanoclay.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.39-40
• /
• 1998

Diffusion barrier characteristics of hf(C,N) thin films for Cu metalliztion was investgated. Hf(C,N) thin films were depposited on Si(100) suvstrates by ppulsed D. C pplasma enhanced metal-organic chemical vappor depposition (ppE-MOCVD) using Tetrakis diethyl amido hafnium (Hf[NC2H5)2]4 : TDEAHf) and N2 as pprecursors. X-ray diffraction analyses sheet resistance measurment and Rutherford backscattering sppectroscoppy analyses revealed that HF(C,N) films pprevent diffusion of Cu fairly well upp to $600^{\circ}C$. At $700^{\circ}C$ however Hf(C,N) films allowed a significant diffusion of Cu into the Si substrate.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 춘계 학술대회
• /
• pp.67-72
• /
• 2005

The bonding structure of organic materials such as fluorinated amorphous carbon films was classified into two types due to the chemical shifts. The electrical properties of fluorinated amorphous carbon films also showed very different effect of two types notwithstanding a very little difference. Fluorinated amorphous carbon films with the cross-link breakage structure existed large leakage current resulting from effect of the electron tunneling. Increasing the cation due to the electron-deficient group increased the barrier height of the films with the cross-link amorphous structure, therefore the electric characteristic of the final materials with low dielectric constant was also improved. The lowest dielectric constant is 2.3 at the sample with the cross-link amorphous structure.

• Food Science and Biotechnology
• /
• 제14권3호
• /
• pp.433-436
• /
• 2005

Chitosans were obtained with varying deacetylation times using the ${\beta}$-chitin isolated from Todarodes pacificus, and their deacetylation degrees and average molecular weights were determined. Films prepared with the squid chitosans were characterized by estimating their tensile strengths, percent elongations, water vapor permeabilities, degree of swelling, and temperatures of glass transition and thermal decomposition. The results suggest that the squid chitosan films were comparable to common crustacean chitosan films in regard of mechanical, moisture barrier, and thermal properties, although further, multilateral investigations are necessary to make a more definitive conclusion.

• 한국포장학회지
• /
• 제26권3호
• /
• pp.125-131
• /
• 2020

Carrageenan-based functional films were prepared by adding two different types of sulfur nanoparticles (SNP) synthesized from sodium thiosulfate (SNPSTS) and elemental sulfur (SNPES). The films were characterized using Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction spectroscopy (XRD), and thermal gravimetric analysis (TGA). Also, film properties such as UV-visible light transmittance, water contact angle (WCA), water vapor permeability (WVP), mechanical properties, and antibacterial activity were evaluated. SNPs were uniformly dispersed in the carrageenan matrix to form flexible films. The addition of SNP significantly increased the film properties such as water vapor barrier and surface hydrophobicity but did not affect the mechanical properties. The carrageenan/SNP composite film showed some antibacterial activity against foodborne pathogenic bacteria, L. monocytogenes and E. coli.

• 멤브레인
• /
• 제25권6호
• /
• pp.530-537
• /
• 2015

태양광 발전시스템은 태양복사에너지를 반도체의 광전효과를 이용하여 전기에너지로 직접 전환시키는 에너지변환 시스템이다. 태양전지의 내구성과 에너지변환율에 영향을 미치는 핵심소재로는 다층형 필름구조를 갖는 백시트를 들 수 있다. 대표적인 상용 백시트는 고내구성 poly(vinyl fluoride) (PVF) 필름이 중심축에 위치하고 가격저감을 위해 도입된 poly(ethylene terephthalate) (PET) 필름이 그 양쪽에 접합된 삼층구조로 구성된다. 하지만, PVF 필름의 높은 가격은 저렴한 고내구성 백시트를 요구하는 시장상황을 반영하기 어렵게 한다. 이를 위한 해결책으로는 PVF 필름을 결정성 PET 필름으로 대체한 탄화수소계 백시트가 될 수 있다. 하지만, PET 필름의 본질적인 가수분해에 대한 취약성으로 인해, 추가적인 수분에 대한 배리어성 부여는 필수적이다. 이를 위해 본 연구에서는 소수성 실리카 나노입자 분산기술을 활용한 수분차단성 폴리우레탄 접착제를 개발코자 하였다. 개발된 접착제는 내부에 위치한 PET 필름으로의 수분침투를 약화시켜, 가수분해속도를 지연시킬 것이라 기대되었다. 본 개념의 효용성을 확인하기 위해, 표준화된 온습도조건에 노출된 이후의 일반접착제와 수분차단성 접착제가 도입된 백시트의 기계적 강도 및 시간당 태양전지성능 변화가 비교평가되었다.