• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.278-282
• /
• 1997

Thermal expension of the ball screw in semi-closed loop type CNC Lathe directly introduces positioning error along the travel axis. In this paper the thermal displacement of the ball screw is estimated by using macro variabie. The estimated dispacement of the ball screw are given to the NC in the form of pitch error compensation data into time interval. The thermal behaviour of the ball screw of the CNC Lasthe under the constant driving conditions was measured to examine the effectiveness of this compensation method. The results showed that thermal displacment of the ball screw were the positioning accuracy could be maintained to better then 6 .mu.m while using this compensation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.160-163
• /
• 2005

The cute. race of CV(constant velocity) Joint is an important load-supporting automotive part, which transmits torque between the transmission gear box and driving wheel. The outer race is difficult to forge because its shape is very complicated and the required dimensional tolerances are very small. The forged CV Joint investigated in this study has six inner ball grooves requiring high operational accuracy. Therefore, the precise measurement of forged CV Joint is very important to guarantee the sound operation without noise and abnormal wear. In this study, unique in-situ measuring system designed specifically to measure the dimensional accuracy of six inner ball grooves of CV joint has been developed and implemented in shop environments. Newly developed system shows high measurement accuracy with simple operational sequence.

• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.76-83
• /
• 1996

We have developed the unconventional robot arm which is composed of the two main parts, one is a ball screw and the other is a robot arm. The dynamic systems of the robot arm and ball screw are unstable systems coupled with each other. The ball screw mechanism is unstable system but controllable system. The robot arm's dynamics is quasi stable system when ball screw's angular position is zero, else, unstable system. Our system has the duality between stability and controllability at the view point of control. This duality causes difficulty to control of the robot arm using normal control law. We have investigated the location of the characteristic roots of the dynamic equation. And we have found out that the best condition for the control of the arm is quasi stable state. In this paper, we have proposed multiple control laws which are consist of three components to guarantee the stability and controllability simultaneously. The computer simulations were carried out based on VSC about the angular position control of the robot arm, and it is confirmed that the good performances could be obtained by using new controller.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.735-739
• /
• 2013

The error motion of a machine tool spindle directly affects the surface errors of machined parts. Spindle motion errors such as three translational motions and two rotational motions are undesirable. These are usually due to the imperfectness of bearings, stiffness of spindle, assembly errors, and external force or unbalance of rotors. The error motions of the spindle need to be reduced for achieving the desired performance. Therefore, the level of error motion needs to be estimated during the design and assembly process of the spindle. In this study, an estimation method for five degree-of-freedom (5 DOF) error motions for a spindle with an angular contact ball bearing is suggested. To estimate the error motions of the spindle, the waviness of the inner-race of bearings and an external force model were used as input data. The estimation model considers the geometric relationship and force equilibrium of the five DOFs. To calculate the error motions of the spindle, not only the imperfections of the shaft and bearings but also driving elements such as belt pulley and direct driving motor systems are considered.

• 한국지능시스템학회논문지
• /
• 제22권1호
• /
• pp.22-27
• /
• 2012

본 논문에서는 볼 나사의 구동에 의해 물체의 파지가 가능한 로봇 그리퍼 메커니즘을 제시한 후, 시뮬레이션을 통하여 제시한 그리퍼 메커니즘의 파지 동작에서 나타날 수 있는 기구학적인 특성을 분석한다. 이를 위하여 구동기의 관절 공간과 그리퍼의 끝 공간간의 기구학적 관계를 파악한다. 제안한 로봇 그리퍼는 하나의 구동모터를 사용하고, 좌우 대칭인 폐체인(closed-chain)을 형성하고 있는 것이 특징이다. 결과적으로, 제안한 로봇 그리퍼는 구조적으로 외력에 강인하고, 하나의 구동모터에 의해 파지 동작이 구현되므로 수월한 파지가 가능하다. 또한 제안된 그리퍼는 파워 파지에 유용한 조임 효과를 갖는다.

• 한국운동역학회지
• /
• 제25권2호
• /
• pp.149-155
• /
• 2015

Purpose : Recently, many researchers and golf coachers demonstrated that X-factor and X-factor stretch had a co-relationship with driving distance. However, its relationship is still controversial and ambiguous. Thus, the aim of this study was to examine the relationship among X-factor, X-factor stretch and swing-related factors, including driving distance in elite golfers. Method : Seventeen male elite golfers (handicap: ${\leq}4$) with no history of musculo-skeletal injuries participated in the study. Thirty spherical retro-reflective markers were placed on including the middle point of PSIS, the right/left ASIS, the right/left lateral acromion of the scapula, driver head and shaft grip. All motion capture data was collected at 100Hz using 6 infrared cameras. Carry distance, club speed, ball speed, smash factor, launch angle, and spin rate were collected from radar-based device, TrackMan. Results : Pearson's correlation coefficient method was used to find the correlations among X-factor, X-factor stretch and swing-related factors. Positive correlations between driving distance and other swing-related factors which include club speed(r=.798, p<.001), and ball speed(r=.948, p<.001) were observed. In contrast to the swing-related factors, X-factor and X-factor stretch had no relationship to driving distance. Conclusion : These results indicate that X-factor and X-factor stretch are not key regulators in driving distance.

• 대한수학회보
• /
• 제53권5호
• /
• pp.1327-1339
• /
• 2016

Self-organizing systems arise very naturally in artificial intelligence, and in physical, biological and social sciences. In this paper, we modify the classic Cucker-Smale model at both microscopic and macroscopic levels by taking the target motion pattern driving forces into consideration. Such target motion pattern driving force functions are properly defined for the line-shaped motion pattern and the ball-shaped motion pattern. For the modified Cucker-Smale model with the prescribed line-shaped motion pattern, we have analytically shown that there is a flocking pattern with an asymptotic flocking velocity. This is illustrated by numerical simulations using both symmetric and non-symmetric pairwise influence functions. For the modified Cucker-Smale model with the prescribed ball-shaped motion pattern, our simulations suggest that the solution also converges to the prescribed motion pattern.

• 정보저장시스템학회논문집
• /
• 제6권2호
• /
• pp.74-78
• /
• 2010

In this paper, 2-axis driving mechanism, which uses voice coil motor (VCM), is proposed to measure the friction force. The proposed VCM actuator consists of two parts; structural part and magnetic circuit part. Structural part is simplified to perform the friction experiments. Magnetic circuit part is composed of two parts. The experiments are accomplished by changing the mass of moving part. Through the experiments, optimal dimension is selected. Finally, the experimental results are verified and the optimal case is applied to the 2-axis driving mechanism, optical image stabilization actuator.

• 한국수소및신에너지학회논문집
• /
• 제11권3호
• /
• pp.107-117
• /
• 2000

Ball poppet valve type high pressure hydrogen injection valve actuated by solenoid has been developed for the feasibility of practical use of hydrogen fueled engine with direct injection and the precise control of fuel injection ratio in hydrogen fueled engine with dual injection. The gas-tightness of ball poppet injection valve is improved by the introduction of ball-shaped valve face, valve end typed spherical pair, and valve stem with rotating blade. Ball poppet valve is mainly closed by differential pressure due to the area difference between valve fillet and pressure piston. So, it can be operated by solenoid actuator with small driving force. From the evaluation of ball poppet injection valve, it was found that the gastightness and controlment of this injection valve are better than those of injection valve had been developed before.

• 대한통합의학회지
• /
• 제4권2호
• /
• pp.13-22
• /
• 2016

Purpose: The purpose of this study was to determine the effects of the swissball exercise in combination with core muscle in beginner golfer. In general, the swiss ball exercise was related in the core muscle ability. Methods: The experiment was conducted with a total of 10 beginner golfer, and they were dicide into two groups: comparison group(n=5) and experimental group(n=5). In this research, the subjects of the comparison group performed the general matte exercise three times a week, for four weeks. The subjects of the experimental group performed the swiss ball exercise in combination with core muscle three times a week, for four weeks. Use the 7-iron and driver were measured head speed and distance of the comparison group and the experimental group, respectively. The collected data were analyzed by using the paired t-test and ANCOVA Results: The results of this study were as follows: 1) Swiss ball exercise in combination with core muscle revealed the significant improvements after corresponding exercise in golf performance capability. 2) Mat exercise was seen less better than the swiss ball exercises. Conclusion: This results suggested that it was improved the golfer shot performance of beginner proposes to see the Swiss combined movement.