• Journal of Korean Medicine Rehabilitation
• /
• v.23 no.4
• /
• pp.59-71
• /
• 2013

Objectives The aim of this review is to figure out which acupoints are frequently used to treat low back pain and which exercises are effective to low back pain. Methods We searched the three electronic database (RISS, KISS, KTKP) and manually checked related Korean journals and reference lists up to June 2013. We investigated the frequency of acupoints for using treatment of low back pain. We Introduce exercise therapies we can do easily at home without professional skills for treatment low back pain. Results We included 72 articles in this study. The most frequently adopted acupoints were BL25, BL23, BL24, GB30, BL40, BL26, BL60, GB34, BL52, BL57, GB39. The most frequently adopted meridian pathways were BL, GB, GV, ST. The most frequently adopted disease causing low back pain were HIVD (Herniated intervertebral disc), Lumbar sprain, Spinal stenosis, Compression fracture, Cauda equina syndrome, Spondylolisthesis, Ankylosing spondylitis. There are many exercise therapies (Lumbar stabilizing exercise, Resistance exercise, Bareunmom physical exercise, Mckenzie exercise, Williams exercise, Emblass exercise, Swiss ball exercise, Thera band exercise, Yoga) for treatment low back pain. Conclusions These results suggest that most frequently adopted acupoints were foot taeyang urinary bladder channel acupoints. Beacuse foot taeyang urinary bladder channel is passes through the waist, it will be effective for treatment of low back pain. Also exercise therapy is effective for enhance Muscular strength. In order to treatment of low back pain, Acupuncture treatment is also important, as well as exercise therapy.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.599-610
• /
• 2001

Due to an increasing interest in esthetics and concerns about toxic and allergic reactions to certain alloys, patients and dentists have been looking for metal-free tooth-colored restorations. Recent improvement in technology of new all-ceramic materials and composite materials has broadened the options for esthetic single crown restorations. The aim of this investigation was to study the fracture strength of the metal-free posterior single crowns fabricated using two recently introduced systems, Empress 2 ceramic and Targis-Vectris. Forty premolar-shaped stainless steel dies with the 1mm-wide circumferential shoulder were prepared. Ten cylindrical crowns having a diameter of 8.0mm and total height of 7.5mm were fabricated for each crown system respectively(PFM, Empress staining technique, Empress 2 layering technique, and Targis- Vectris). The crowns were filled with cement and placed on the stainless steel dies with firm finger pressure. The crowns were then stored in distilled water at room temperature for 24 hours before testing. The crowns were tested for fracture strength in an Instron universal testing machine (Instron 6022). With a crosshead speed of 1mm/min the center of the occlusal surface of the crown was loaded using a 4-mm-diameter stainless steel ball until fracture occurred. The fracture surfaces of the crowns were gold coated and examined using scanning electron microscopy(Jeol JSM-840 Joel Ltd., Akishima, Tokyo, Japan). Within the parameters of this study the following conclusions were drawn: 1. The mean fracture strength for PFM crowns was 5829(${\pm}906$)N; for Empress staining technique the fracture strength was 1697(${\pm}604$)N; for Empress 2 Layering technique the fracture strength was 1781N(${\pm}400$)N, and the fracture strength for Targis- Vectris was 3093(${\pm}475$)N. 2. The fracture strength of the PFM crowns was significantly higher than that of the Empress 2 and the Targis-Vectris crowns (P<0.05). 3. The fracture strength of the Targis-Vectris crowns was significantly higher than that of the Empress 2 crowns (P<0.05). 4. No statistical difference was found when Empress staining technique was compared with Empress 2 layering technique. 5. The SEM image of fracture surface of Empress 2 crown showed a very dense microstructure of the lithium disilicate crystals and the SEM image of fracture surface of Targis-Vectris crown showed indentations of Vectris and some fibers tom off from Vectris.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.5
• /
• pp.526-536
• /
• 2006

Statement of problem : Use of fiber composite technology as well as development of nonmetal implant prosthesis solved many problems due to metal alloy substructure such as corrosion. toxicity, difficult casting, expensiveness and esthetic limit. After clinical and laboratory test, we could find out that fiber-reinforced composite prostheses have good mechanical properties and FRC can make metal-free implant prostheses successful. Purpose : The purpose of this study is to evaluate the flexural strength of implant fixed prosthesis using fiber reinforced composite. Material and methods : 2-implant fixture were placed in second premolar and second molar area in edentulous mandibular model, and their abutments were placed, and bridge prostheses using gold, PFG, Tescera, and Targis Vectris were fabricated. Tescera was made in 5 different designs with different supplements. Group I was composed by 3 bars with diameter 1.0mm and 5 meshes, 2 bars and 5 meshes for Group II, 1 bar and 5 meshes for Group III, and only 5 meshes were used for Group IV. And Group V is composed by only 3 bars. Resin (Tescera) facing was made to buccal part of pontic of gold bridge. All of gold and PFG bridges were made on one model, 5 Targis Vectris bridges were also made on one model, and 25 Tescera bridges were. made on 3 models. Each bridge was attached to the test model by temporary cement and shallow depression was formed near central fossa of the bridge pontic to let 5 mm metal ball not move. Flexual strength was marked in graph by INSTRON. Results : The results of the study are as follows. The initial crack strength was the highest on PFG. and in order of gold bridge Tescera I, Tescera II, Targis vectris, Tescera IV, Tescera III, and Tescera V. The maximum strength was the highest on gold bridge, and in order of PFG, Tescera I, Tescera IV Tescera II, Targis vectris, Tescera III, and Tescera V. Conculsions : The following conclusions were drawn from the results of this study. 1. Flextural strength of implant prosthesis using fiber reinforced composite was higher than average posterior occlusal force. 2. In initial crack strength, Tescera I was stronger than Tescera V, and weaker than PFG. 3. Kinds and number of auxillary components had an effect on maximum strength, and maximum strength was increased as number of auxillary components increased. 4 Maximum strength of Tescera I was higher than Targis vectris, and lower than PFG.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.1
• /
• pp.58-66
• /
• 2020

Implant-Assisted Removable Partial Dentures (IARPDs) treatment is being performed in a fully edentulous patient using implant surveyed prosthesis as an abutment. Implant-supported prosthesis as an abutment of IARPDs is classified into screw-retained and cement-retained type according to the retention type, and each has advantages and disadvantages. The EZ crown system (Samwon DMP, Yangsan, Korea) has a cylinder combined with abutment, and the nickel-titanium spring in this cylinder provides a constant force on the zirconia ball to obtain retention in EZ crown system. In this patient, the natural abutment teeth of the mandibular overdenture was hopeless. We planned implant assisted removable partial denture using anterior implant surveyed prosthesis considering functional and esthetical rehabilitation, cost and patient's needs. When fabricating IARPDs using implant as abutment, we could compensate for the shortcomings of existing implant-supported prosthesis retention type and made the design of removable partial denture easy due to using EZ crown system.

• Journal of the Korean Electrochemical Society
• /
• v.11 no.4
• /
• pp.268-272
• /
• 2008

$LiFePO_4$ material was synthesized by electrospinning method to obtain optimal particle size($50{\sim}100\;nm$) without carbon coating or ball milling. This material showed an orthorthombic structure with Pnma space group without any impurities, such as FeP or $Fe_2P$, in the XRD pattern. The particle morphology and particle shape were observed by SEM analysis. Li/$LiFePO_4$ cell showed a high initial discharge capacity of 135 mAh/g, at current density of $0.1\;mA/cm^2$ with a cut-off voltage of 2.8 to 4.0V. This cell exhibited a perfect cycle performance over 99.9% cycle retention rate up to 50 cycles.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.323-328
• /
• 1982

Kareius bicoloratus (Basilewsky) is one of the commonly found right-eye flounders and widely distributed in the coastal waters of Korea and Japan. On December 11,1980, the ailthors carried out an experiment to obtain a large number of fertilized eggs from wild adult fish caught by a trawler. The fish were obtained from Maisaka fish market, Shizuoka Prefecture, Japan. The egg is pelagic, spherical in shape and measuring 1.014-1.04 mm in diameter. The yolk as well as the egg capsule is colorless and transparent, and contain no oil globules. The hatching took place in 73 hr 45 min after fertilization at the water temperature $8.0-9.5^{\circ}C$. Newly hatched larvae are 3.09-3.146 mm in total length, with the anus situated in the middle of the body. The marginal fin does not have Pigment cells and myotome number is 17+20=37. Within one day after hatching, the larvae attained 3.77 mm in total length, and there appeared three or four melanophore on yolk sac. When the larvae attained 3.96 mm in total length, melanophores began to appear on the eye ball. Two days after hatching, the larvae attained 4.05 mm in total length, most of yolk material was absorbed, and the caudal fin began to grow at the terminal part of the notochord. When the larvae attained 4.21 mm in total length, mouth and eyes began to move. After 3 days, the larvae attained 4.342-4.394 mm in total length, alimentary canal differentiated, melanophores appeared on the lower jaw and posterior part of the fin membrane. When the larvae attaind 4.576 mm in total length, marginal line of dorsal fin membrane became concave.

• Composites Research
• /
• v.31 no.5
• /
• pp.209-214
• /
• 2018

This paper explain about the development of environmental friendly, low cost and stable supply material i.e., rice husk and shell were used as micro incorporating bio waste filler. Those were processed by ball mill and analyzed through micro observation by FE-SEM, EDS and particle size distribution. The obtained filler was mixed with epoxy resin for the manufacturing of CFRP composite and study tensile properties. In EDS analysis main contents of rice husk and rice husk ash are C, O and Si. When rice husk was burned C and Si ration were increased. Shell powder has C, O and Ca. It caused $CaCO_3$ from shell. Surface weighted mean of rice husk powder is $6.19{\mu}m$ and volume weighted mean is $14.77{\mu}m$. And it has rod type particles which caused hair and husk structure parts. Surface weighted mean of rice husk ash powder is $1.55{\mu}m$ and volume weighted means is $8.20{\mu}m$. Surface weighted mean of shell powder is $2.53{\mu}m$ and volume weighted mean is $5.79{\mu}m$. The tensile decreased with increasing the content of micro filler in CFRP composites. In case of rice husk, the significant decrement of tensile strength was observed. and in case of shell powder, there is no effect of changes take place in tensile strength.

• Composites Research
• /
• v.31 no.5
• /
• pp.260-266
• /
• 2018

This study investigates thermal and mechanical characterization of Hafnium carbide coating on the $C_f-C$ composites. The hafnium carbide coatings by vacuum plasma spray on the C/C-SiC composites are prepared to evaluate oxidation and wear resistance. We perform the thermal durability tests by thermal cycling at $1200^{\circ}C$ for 10cycles in air and investigates the weight change of each cycle. We also evaluate the wear and indentation behavior using tungsten carbide ball indenter as a mechanical evaluation. As a result, the HfC coating is beneficial to reduce of weight loss during thermal cycling test and improve the elastic property of C/C-SiC composite. Especially, the HfC coating improves the wear resistance of C/C-SiC composite.

• Parasites, Hosts and Diseases
• /
• v.56 no.4
• /
• pp.379-383
• /
• 2018

The present study was performed with morphological and molecular analysis (cox1 and nad1 mitochondrial genes) to identify the proglottids of spirometrid tapeworm found in the stool of an African lion, Panthera leo, in the Serengeti plain of Tanzania. A strand of tapeworm strobila, about 75 cm in length, was obtained in the stool of a male African lion in the Serengeti National Park ($34^{\circ}$ 50' E, $02^{\circ}$ 30' S), Tanzania, in February 2012. The morphological features of the adult worm examined exhibited 3 uterine coils with a bow tie appearance and adopted a diagonal direction in the second turn. The posterior uterine coils are larger than terminal uterine ball and the feature of uteri are swirling rather than spirally coiling. The sequence difference between the Spirometra species (Tanzania origin) and S. erinaceieuropaei (GenBank no. KJ599680) was 9.4% while those of S. decipiens (GenBank no. KJ599679) differed by 2.1% in the cox1 and nad1 genes. Phylogenetic tree topologies generated using the 2 analytic methods were identical and presented high level of confidence values for the 3 major branches of the 3 Spirometra species in the cox1 gene. The morphological and molecular findings obtained in this study were nearly coincided with those of S. ranarum. Therefore, we can know for the first time that the African lion, Panthera leo, is to the definitive host of this tapeworm.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.4
• /
• pp.476-486
• /
• 2007

This study was performed to investigate the dietary behaviors, perceived stress, and health-related factors along with their correlations in University students. The number of subjects was 150(64 males and 86 females), and the results of the study were as follows: Stress was felt by over 80% of the male and female students. The male students were more stressed than the females for economic value, gender difference, professor and drinking-related stress factors, and there was a significant difference between the genders. The female students had more clinical symptoms from stress than the male students in terms of dizziness, indigestion and constipation(p<0.01, p<0.001). The amount of food intake under stress was significantly different by gender. The female students preferred sweet tasting items, whereas the male students preferred hot tasting item when under stress. Also the intake of candy and chocolate when under stress in the male and female students was $2.00{\pm}0.74$ and $2.41{\pm}0.75$, respectively. The female students consumed candy and chocolate more than the male(p<0.01). Furthermore, 62.5% of the male students and 30.2% of the female students exercised to get rid of stress: the use of ball games as exercise in male and female students was $1.59{\pm}0.83$, $1.01{\pm}0.11$, respectively. Many students drank alcohol and smoked while under stress. In particular, the male students smoked more than normal as compared to the females, and there was a significant gender difference(p<0.001). The clinical symptoms positively correlated with the life stress level were degree of nervousness, sweaty, achy neck and shoulders, sore back, dizziness, eye fatigue, headache and indigestion. The amount of food intake under stress was positively correlated to the clinical symptom of headache. These results indicate the effects of life stress on dietary behaviors, food choice, and health status. Stress not only changed dietary behaviors, but was also related to health status. Therefore, education with regard to nutrition is necessary if college students are to practice food eating habits to correctly manage life stresses.