• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.199-208
• /
• 2017

리튬 폴리머 배터리는 높은 안전성, 빠른 충전 및 긴 라이프 사이클 등으로 인해 에너지 저장치(ESS: Energy Storage System), 전기자동차(EVs: Electric Vehicles)등에 채택이 되어 사용되고 있으며, 그리고 현재는 농업용 드론에서 까지 사용이 되고 있다. 그러나 리튬 폴리머 배터리는 과충 방전에는 리튬-이온 배터리 내의 격차구조가 파괴되어 배터리 수명이 줄어들게 되며, 과충 방전을 방지하기 위해 불균등한 셀 전압을 균등 제어 할 수 있는 셀 밸런싱 시스템이 필수적이다. 본 논문은 각 셀의 충 방전할때의 전압차이를 검출하여 불균형된 셀을 확인하여 비선형 시스템에 적합한 퍼지 제어기를 개발하여 적용한 셀별 밸런싱 알고리즘을 제안한다. 본 논문은 농업용 드론의 배터리팩의 셀 밸런싱을 퍼지제어를 하여 셀 간 균등 제어를 위해 설계하였으며, 최종 결과로 셀 간 밸런싱이 잘 되는지 확인하고 자 셀이 2개 있을 때와 6개 그리고 최종적으로 12개의 각 셀 밸런싱이 되는지를 확인하였다. 이는 다른 제품에도 사용할 수 있는지를 실험하고자 하였으며, 확인결과 사용된 셀의 개수와는 관계없이 셀별 밸런싱이 잘 되고 있음을 확인하였다.

• 한국CDE학회논문집
• /
• 제22권1호
• /
• pp.1-9
• /
• 2017

This research develops dispatching rule for a wafer FABs with dedication constraints. Dedication, mostly considered in a photolithography step, is a feature in a modern FABs in order to increase the yield of machines and achieve the advance of manufacturing technology. However, the dedication has the critical problem because it causes dedication load of machines to unbalance. In this paper, we proposes the dedication load based dispatching rule for load balancing in order to resolve the problem. The objective of this paper is to balance dedication load of photo machines in wafer FABs with dedication constraint. Simulation experiments show that the proposed rule improves the performance of wafer FABs as well as load balance for dedication machines compared to open-loop control based conventional dispatching rule.

• Journal of Electrical Engineering and Technology
• /
• 제9권5호
• /
• pp.1537-1543
• /
• 2014

This paper presents a new DC/AC multilevel converter. This configuration uses single DC sources. The proposed converter has two stages. The first stage is a DC/DC converter that can produce several DC-links in the output. The DC/DC converter is one type of boost converter and uses single inductor. The second stage is a multilevel inverter with several capacitor links. In this paper, one single input multi output DC-DC converter is used in order to voltage balancing on multilevel converter. In addition, as compare to traditional multilevel inverter, presented DC/AC multilevel converter has less on-state voltage drop and conduction losses. Finally, in order to verify the theoretical issues, simulation and experimental results are presented.

• Structural Engineering and Mechanics
• /
• 제48권5호
• /
• pp.615-642
• /
• 2013

In this paper a study on prestressed concrete slab bridges is presented. A design philosophy based on the concept of load balancing through prestressing is proposed in order to minimize the effects of delayed deformations due to creep. Aspects related to the stress redistribution inside these bridges for time-dependent phenomena are analyzed and discussed, by applying the principles of aging linear visco-elasticity. Prestressing is seen as an equivalent external load which counterbalances the permanent loads applied to the bridge, nullifying the elastic deflections due to sustained loads, and thus avoiding the related delayed deformations. An optimization of the structural behavior through the use of one-way prestressing is achieved. The determination of a convenient variable depth of slab bridges and the correspondent layout of tendons is considered as a useful means for applying the load balancing concept in actual cases of structures like long cantilevers or bridge decks. A case-study related to the slab bridges built 30 years ago at Jeddah in Saudi Arabia is presented and discussed, in order to show the effectiveness of the proposed approach to the conceptual design of prestressed concrete bridges.

• 대한안전경영과학회지
• /
• 제19권1호
• /
• pp.203-210
• /
• 2017

Companies are pursuing the management of small quantity batch production or JIT(Just-in-time) system for improving the delivery response and LOB(Line Balancing) in order to satisfy consumers' increasing demands in the current global economic recession. And in order to improve the growth of production for reducing manufacturing cost, improvements of the Load Balancing have become an important reformation factor. Thus this paper is aimed at warehouse which procures materials on the assembly line in procurement logistics of automotive logistics and proceed with research on heuristic algorithm development which can increase the Load Balancing of workers. As a result of this study, when applied the primary target value, it was verified that the whole workers decreased from 28 to 24. Furthermore, when specified the secondary target value and applied algorithm once more, it was verified that the Load Balance Ratio was improved from 44.96% to 91.7%.

• 디지털융복합연구
• /
• 제6권2호
• /
• pp.117-125
• /
• 2008

High-volume web sites often use clusters of servers with load balancing as a way to increase the performance, scalability, and availability of the sites. Load balancing, usually performed by load balancer in front of such clusters, is a technique to spread workload between several computers or resources, in order to get optimal resource utilization or response time. In this paper we examine the performance for several configurations of cluster-based web servers using a simulation approach. We investigate two types of buffering scheme (common and local) for web clusters and three load balancing policies (uniformly random, round robin, and least queue first), using response time as a performance measure. We also examine two basic approaches of scaling web clusters: adding more servers of same type or upgrading the capacity of the servers in the clusters.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.623-628
• /
• 2000

Since the influence coefficients method in balancing of rotors is developed with the basement of not the principle of rotor system dynamics, but the linear relationshop of between the measuring quantities and the unbalance quantities, field engineers can apply the method without additional understanding on the rotor dynamics. But the influence coefficients method is not robust to the measurement error. This paper proposes a new method for the two plane balancing of rigid rotor, based on the principle of rotor dynamics. And the kit for experiment is made by ourselves, and in order to measure in the same condition with it, we do a experiment three times. And then with the Response of gap sensor, the SNR(Signal and Noise) is compared and analyzed about measuring error between the influence coefficient method, and the new method, and it is proved that the new method is less robust than the influence coefficient method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2326-2337
• /
• 2013

Many applications can be parallelized by using multicore platforms. We propose a load-balancing technique for parallelizing a whole application, whose first module (H.264) has data independency and whose second module (AES) has data dependency. Instead of distributing the first module symmetrically over the multi-core platform, we distribute the data-independent workload asymmetrically in order to start the data-dependent workload as early as possible. Based on the experimental results with a compression/encryption application, we confirm that the asymmetric load balancing can provide better performance than the typical symmetric load balancing.

• 지능정보연구
• /
• 제2권1호
• /
• pp.93-107
• /
• 1996

A flexible flow line(FFL) consists of several groups of identical machines. All work-orders flow along the same path through successive machine groups. Thus, we emphasized the balancing of workloads between machine groups in order to maximize total productivity. On the other hand, many different types of work-orders, in varying batch or lot sizes, are produced simultaneously. The mix of work-orders, their lot sizes, and the sequence in which they are produced affect the amount of workload. However, the work-orders and their lot sizes are prefixed and cannot be changed. Because of these reasons, we have developed an optimal route selection model using heuristic search and Min-Max algorithm for balancing the workload between machine groups in the FFL.

• 전자공학회논문지B
• /
• 제33B권5호
• /
• pp.33-40
• /
• 1996

In this paper, we propose the discrete model reduction method of bounded real transfer functions. From the discrete bounded real lemma, we obtain the two riccati equations and define the disrete bounded real balancing using solutions of these two riccati equations. And we get the reduced order discrete model from the GSPA of full order model. Especially, when free parameter of GSPA is .+-.1, we show that the reduced order discrete model retains minimality, stability, and bounded real and BR-balancing properties. And we derive the .inf.-norm error bound between full order model and reduced order model. Finally to illustrate the validity of proposed method, we give an example.