• Journal of Korean Institute of Industrial Engineers
• /
• v.23 no.2
• /
• pp.307-321
• /
• 1997

In this paper, we consider the expert's ambiguity and the decision maker's fuzzy goals which are incorporated into multiobjective nonlinear programming problems in order to find a compensatory solution. The proposed method can be applied to all cases of multiobjective problems with fuzzy parameters since the interactive process with a decision maker is simple, various uncertainties involved in decision making are eliminated and all the objectives are well balanced. An illustrative numerical example for nonlinear programming problems with fuzzy parameters is demonstrated along with the corresponding computer output.

• 전기의세계
• /
• v.27 no.3
• /
• pp.47-52
• /
• 1978

This paper deals with the phase converter. The single-phase inverter with 120.deg.C phase-lagging is used for the phase conversion. As the waveform of the inverter is rectangular, the output waveforms of the three-phase lines include the harmonics. Single-phase operation by using phase converter and three-phase balanced operation of the three-phase induction motor are compared, and the effects of the harmonics are analyzed and discussed.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.145-152
• /
• 1999

A new switch architecture is presented to enhance out-put queuing in photonic packet switches. Its appkication is for a packet switching enviroment based on the optical transport of fixed length packets. This architecture consists of a couple of cas-cading switching elements with output queuing, whose buffer ca-pacity is limited by photonic technology. The introduction of a suitable buffer management allows a very good and balanced ex-ploitation of the available optical memories, realized with fiber de-lay lines. In particular, packet loss performance is here evaluated showing the improvement with respect to the single switch and a way to design large optical switches is shown in order to meet broadband network requirements.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.3 no.2
• /
• pp.169-175
• /
• 2014

This paper presents an improved direct power control (DPC) strategy for grid-connected voltage source inverter (VSI) under unbalanced and harmonic grid voltage conditions. Based on the mathematic model of VSI with the negative sequence, 5th and 7th harmonic voltage components consideration, a PI controller is used in the proposed DPC strategy to achieve the average output power regulation. Furthermore, vector PI controller with the resonant frequency tuned at the two times and six times grid fundamental frequency is adopted to regulate both negative and harmonic components, and then two alternative targets of the balanced/sinusoidal current and smooth active/reactive output power can be achieved. Finally, simulation results based on MATLAB validate the availability of the proposed DPC strategy.

• Journal of Industrial Technology
• /
• v.25 no.B
• /
• pp.203-210
• /
• 2005

The PWM(Pulse Width Modulated) converter for the AC to DC rectification has become attractive in the industrial variable-speed drive application and the electric utilities due to the following benefits: Nearly the sinusoidal input current with unity power factor; Controllable DC link voltage; Bidirectional power flow. This paper presents a quantitative analysis of single and three phase PWM converter's input and output characteristics as a function of the input filter inductance under balanced and unbalanced conditions. Also, its performance under the supply voltage including harmonics is investigated by simulation with Matlab Simlulink and experiments. These results provide a reference for selecting the reasonable converter's input filter inductance for given harmonics or power factor criterion.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.3 s.168
• /
• pp.123-129
• /
• 2005

The unbalance of the power output, noise, and vibration is happened by the disproportionate pressure variation in the cylinder. For this reason, decrease of the pressure in the cylinder and increase of the residual gas effect on the engine performance. If the abnormal combustion is continued, the crack would be occurred in the engine block. And it could be broken down. For the normal combustion of the SI engine, it is important to supply the balanced mixture by each operating condition. In this study, it was tested the combustion characteristics in the cylinder according to the abnormal adjusting of intake & exhaust valve. This test is willing to set a basic data's analysis fur developing an automotive diagnosis system by analyzing the pressure in the cylinder, the output signal of MAP sensor, the exhaust gas, etc.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.254-256
• /
• 2000

본 논문에서는 여러 단계의 QoS(Quality of Service)를 지원하면서 빠르고 확장이 용이하며 각종 패킷 폐기(packet drop) 방식을 지원하는 평형 파이프라인 우선순위 아웃풋 큐 구조(balanced pipelined priority output queue architecture)를 제시하고 있다. 본 방안은 기존에 연구된 파이프라인 우선순위 힙(pipelined heap, P-heap)[1]을 기반으로 하고 있다. 파이프라인 우선순휘 힙은 우선순위에 따라 패킷을 전송하는 작업을 파이프라인 방식으로 처리하여 처리 성능을 향상시킨 아웃풋 큐 구조이다. 그러나 P-heap은 평형성(balance) 문제를 전혀 고려하고 있지 않으며, 다양한 패킷 폐기 방안을 제공하고 있지 못하다. 본 논문에서는 이런 측면에서 P-heap을 개선한 Advanced P-heap을 제안하고 있다. Advanced P-heap은 평균적인 상황에서 힙에 평형성을 부여하고, 각종 패킷 폐기 정책을 지원할 수 있는 일반적인 우선순위별 차별 패킷 구조를 제시하고 있다.

• 전기의세계
• /
• v.28 no.3
• /
• pp.65-71
• /
• 1979

This paper examines the reasonable winding arrangements of designing tapped winding capacitor motors to used in two voltage sources. The approach of this paper is based partly on a hybrid equivalent circuit of a single phase induction motor, together with an experimental method by sample machines. In results, the distribution of etra and main windings ia the stator is to be balanced in each magnetic pole and in order to have the same torque output characteristics for two different voltage sources, the extra/main winding ratio is to be adjusted. Experimental results obtaired with sample macines of about 1/8 hp output rating are used with analysis to predict the favorable winding conditions.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.347-348
• /
• 2017

This paper presents a new current balancing operation for LED using double-step-down dc-dc converter. The two output currents of the proposed converter can be balanced by charge balance condition although the two output resistances are different. In addition, voltage stresses of the switches of the proposed converter are lower than those of interleaved buck converter. To verify the operation of the proposed converter, simulation program is used.

• Journal of Power Electronics
• /
• v.14 no.6
• /
• pp.1147-1156
• /
• 2014

This study proposes a quasi-fixed-frequency hysteresis current tracking control strategy for modular multilevel converters (MMCs) on the basis of voltage partition principle. First, by monitoring the grid voltage and the deviation between the output and reference currents, the output voltage is determined, thus prompting the output current to quickly and efficiently track the given current. Second, the voltages of the upper/lower capacitor of the arm and the voltages between the upper and lower arms are balanced by combining these arms with virtual loop mapping and arm voltage balance control, respectively. In particular, the proposed method is designed for any level and number of sub-modules. The validity of the proposed method is verified by simulations and experimental results of a five-level MMC prototype.