• 제목/요약/키워드: balance factor

검색결과 741건 처리시간 0.022초

이산화질소 다중측정을 이용한 실내공기의 환기량 밀 발생량 추정에 관한 연구 (A Study on Estimation on Air Exchange Rate and Source Strength in Indoor Air Using Multiple Measurements of Nitrogen Dioxide)

  • 양원호;이기영;정문호;정문식
    • 한국산업보건학회지
    • /
    • 제10권1호
    • /
    • pp.160-169
    • /
    • 2000
  • Daily indoor and outdoor nitrogen dioxide ($NO_2$) concentration for 30 days were measured in 28 houses with questionnaire of housing characteristics in Brisbane, Australia. Using mass balance equation and regression analysis, penetration factors and source strength factors were calculated. The penetration factors of 27 houses except one house were between zero and 1, though penetration factor should be between zero and 1 by means of mass balance equation. Relationship between indoor and outdoor concentrations in each 27 house was calculated using regression analysis. According to the obtained linear regression equation, the slope means penetration factor and the intercept means source strength factor. Calculated mean and standard deviation of coefficients of determination ($R^2$) in electric and gas range houses were $0.70{\pm}0.13$ and $0.57{\pm}0.21$, respectively. The source strength factors were more than zero in 27 houses. Mean and standard deviation of slopes in electric and gas range houses were $0.65{\pm}0.18$ and $0.56{\pm}0.12$, respectively. Mean and standard deviation of intercepts in electric and gas range houses were $1.49{\pm}1.25$ and $5.77{\pm}3.55$, respectively. Air exchange rate and source strength were calculated from penetration factor and source strength factor, respectively. Geometric mean and standard deviation of calculated air exchange rates in 27 houses were $1.1/hr{\pm}1.5$. Presence of gas range was the most significant factor contributing to indoor $NO_2$ level in house characteristics (p=0.003). In gas range houses, source strengths ranged from 4.1 to $33.1cm^3/hr{\cdot}m^3$ with a mean $12.7cm^3/hr{\cdot}m^3$ and a standard deviation 9.8. The source strengths of gas range houses were significantly different from those of electric range houses by t-test (p<0.001)

  • PDF

노인운동의 변화단계에 따른 의사결정 균형에 대한 연구 (Decisional balance corresponding to the Stage of Change of Exercise in Elderly)

  • 김소인;전영자;이평숙;김순용;이숙자;박은숙;장성옥
    • 성인간호학회지
    • /
    • 제12권1호
    • /
    • pp.40-51
    • /
    • 2000
  • Purpose : This study was carried out to identify the factor of decisional balance for exercise. This was composed of a set of variables at the level of decision making when the elderly decide to do exercise. It was used to classify and identify the characteristics of the stages of change for exercise to which the elderly belong, and was used to identify the variables of decisional balance which influence the stage of change for exercise in the elderly. Methods : Convenient samples of 198 subjects over age 60 in Seoul( mean age=70) were selected from community living, mentally competant older adults and the data was collected from April 1, 1999 to May 31, 1999. The research instrument was the Decisional Balance Measure for Exercise(Marcus & Owen., 1992), Stage of Change Measure(Marcus et al,1992). The data was analyzed by SAS Program. Results: 1. According to stage of change measure, without missing data,191 subjects were distributed in each stage of change for exercise : 50 subjects(26.1%), 7 subjects (3.6%), 52 subjects(27.2%), 4 subjects(2%), and 78(40.8%) belonged to the precontemplation stage, contemplation stage, preparation stage, action stage and maintenace stage. 2. Factor analysis identified 3 factors of decisional balance as appropriate factors for exercise of the elderly and named by researchers; 1)'Perceived Physical-psychological benefit', 2)'Perceived Physical-psychological burden', and 3)'Perceived time burden'. 3. The analysis of variance showed that the two components Perceived Physical - psychological benefit(F=45.95, P=.0001), and Perceived Physical-psychological burden (F=26.52, P=.0001) were significantly associated with stage of change. 4. Through the discriminant analysis, it was found that both 'Self Perceived Physical - Psychological benefit' and 'Perceived Physical-Psychological burden' were the influential variables in discriminating the three stages of change(pre-contemplation, preparation, and maintenance). Conclusion : Results are consistent with the application of the Transtheoretical model, which has been used to understand how people change health behaviors. Even though this study is a cross-sectional, not a longitudinal study, the findings of this study give useful information for exercise intervention about especially the factors relating to decision making for exercise of the elderly in the different stages of change of exercise.

  • PDF

성공적 노화를 위한 양손 운동 듀오콕 프로그램의 적용 및 효과성 검정: 양측 운동 (Application and Effectiveness of the Two-Handed Exercise Duocock Program for Successful Aging: Bilateral Exercise)

  • Sung, Yun Jae;Moon, Young Jin
    • 한국운동역학회지
    • /
    • 제30권1호
    • /
    • pp.121-129
    • /
    • 2020
  • Objective: This study was conducted with the aim of verifying the effectiveness of the duocock exercise, which is being utilized at the newly developed site to promote balance maintenance, basic physical strength and muscle strength among various age groups, in order to prevent fall and successfully age. Method: In this study, we conducted the duocock Exercise Program for 12 weeks (twice a week for an hour) for 10 senior citizens aged 65 or older (68.8±4.76 yrs, height: 15±6.00 cm) using Western-based health institutions in Daejeon, and compared the pre- and post- effects on basic physical strength and posture balance. All the data obtained from this study were used in statistical program SPSS 24 to perform paired t-test. The significance level for all statistical analyses was set at the level of p<0.05. Results: The 12 week duocock program showed statistically significant improvements in lower extremity muscle strength, equilibrium, agility, balance, and coordination in the basic fitness factors underlying successful aging (p<0.05). In addition, the trunk imbalance, which acts as a factor of falls and body balance, was statistically significant (p<0.05) and the posture balance of the sagittal plane also showed the effect of proper body adjustment. Conclusion: Based on the results of this study, duocock provides a new exercise program in the form of a sustainable sport as a two-handed exercise, and is very effective for the elderly to improve their basic physical strength as well as to control postural imbalances, strengthen and increase muscle strength.

일-가족 문화, 일-가족 균형, 그리고 조직몰입의 구조적 관계; 호텔 직원을 대상으로 (A Structural Relationships of Work-Family Culture, Work-Family Balance, and Organizational Commitment among Hotel Employees)

  • 최현정
    • 한국조리학회지
    • /
    • 제19권5호
    • /
    • pp.121-135
    • /
    • 2013
  • 본 연구의 목적은 국내 호텔 근로자를 대상으로 일-가족 문화, 일-가족 균형 그리고 조직몰입의 구조적인 관계를 분석하는 것이다. 연구목적을 달성하기 위하여 빈도분석, 확인요인분석, 신뢰도 분석, 상관관계분석 그리고 공분산 구조 분석을 적용하였으며, 이는 통계패키지 프로그램인 SPSS(18.0)과 AMOS(18.0)을 활용하여 검증하였다. 그 결과에 따르면, 일-가족 문화 요인 중 '경영적 지원'이 일-가족 균형에 긍정적이며 유의한 영향을 미치는 것으로 확인되었으며, '불이익 최소화'가 정서적 조직몰입에 긍정적이며 유의한 영향이 있는 것으로 나타났다. 마지막으로 일-가족 균형이 정서적 조직몰입을 향상시키는 것에 효과가 있는 것으로 확인되었다. 따라서 정서적 조직몰입의 향상을 위해서는 직원들이 차후 불이익에 대한 걱정 없이 가정친화정책을 활용할 수 있는 분위기가 적극적으로 조성되어야 할 것이며, 경영진은 직원들의 직장과 가정생활의 조화를 중요하게 생각하고, 직원의 가정생활의 안정에 대해서도 관심을 기울이고 배려함으로써 직원들의 직장과 가정생활의 양립이 실현될 수 있도록 노력해야 할 것이다.

  • PDF

자동차 조립공정 부품공급 작업자별 부하밸런스 평준화 알고리즘 연구 (A Study on the Improvement of Load Balance for Materials Supply Worker in Automobile Assembly Line)

  • 장정환;장청윤;전욱;조용철;김유성;배상돈;강두석;이재웅;이창호
    • 대한안전경영과학회지
    • /
    • 제18권4호
    • /
    • pp.107-114
    • /
    • 2016
  • The efficiency of the purchasing and procurement logistics is important in automotive industry. The rationalization of production system is directly impact on productivity and quality. For this reason importance of logistics is high. Despite we are continuously making effort, our country are still below the level than developed country on logistics efficiency. Rising labor costs is an important factor in increasing logistics costs. So workforce reduction in logistics department is a large part. We deal with A-company inbound logistics, especially procurement logistics in automotive logistics as research object. So in this study we do research on work load balance about workers. We do research on 1,475 kinds of components in procurement process. We applied work load balance algorithm on chassis, final, sequence, trim warehouses workers. According to number of workers and average M/H, algorithm is applied in two ways. After applied work load balance algorithm we reduced numbers of workers from 28 to 20 and improved worker load balance rate from 47.1% to 93.7%.

타워크레인 텔레스코핑 작업의 풍속 및 하중에 대한 구조 안전성 연구 (A Study on the Structural Safety of Tower Crane Telescoping Work according to Wind Speed and Load)

  • 정성룡;이도근;백신원;신상연
    • 한국안전학회지
    • /
    • 제36권1호
    • /
    • pp.9-17
    • /
    • 2021
  • This study analyses the load imbalance of the tower crane used in telescoping work for structural safety, owing to the difference in wind speed and balance weight position. This is because wind speed and position of the balance weight have a significant impact on the structural stresses of a tower crane during telescoping work. Therefore, structural analysis was performed on the 290HC model, which is often used at construction sites and has only one cylinder installed. Moreover, two models were classified to determine the load acting on the connecting part of the telescopic cage to slewing platform and the cylinder. Five types of balance weight positions were applied at regular intervals from jibs; moreover, four types of wind load criteria were differently applied. Hence, the telescopic cage columns were destroyed at all balance weight positions at a wind speed of 30 m/s and only at certain locations at a wind speed of 20 m/s. Furthermore, failures occurred for cylinders, torsional, and bending at wind speeds of 30 m/s and 20 m/s, load imbalances above the allowable thresholds considering the safety factor. In addition, the load imbalance in the telescoping work also varied depending on the position of the balance weights. The results of these studies have validated that the current standards of adjusting the appropriate position of the balance weights on the jib are completely valid, with the telescoping work to be executed only at wind speeds of less than equal to 10 m/s.

후마네트 운동프로그램이 노인의 낙상 관련 체력요인과 인지기능에 미치는 영향 (The Effects of Fumanet Exercise Program on Fall Down-Related Physical Fitness Factor and Cognitive Function in Elderly People)

  • 김혜정;방요순;손보영;오은주;황민지
    • 대한통합의학회지
    • /
    • 제5권2호
    • /
    • pp.33-42
    • /
    • 2017
  • Purpose: This study examined the effects of the fumanet exercise program on the cognitive function and fall down-related physical fitness factor in elderly people. Method: The study period was May 2-June 24, 2016. The participants included 20 elderly persons (control group 10, experimental group 10) who registered at the day-care Center in G. City. Descriptive statistics were used for the analysis of the control and experimental groups' general characteristics. The chi-square and Mann-Whitney U tests were conducted to identify the two groups' general characteristics' and dependent variables' homogeneity. The Wilcoxon signed-rank test was used to compare the pre-and post-intervention cognitive function and fall down-related physical fitness factor, and a Mann-Whitney U test was used to analyze the rate of cognitive function and fall down-related physical fitness factor changes between the groups after the intervention. Result: The participants' fall down-related physical fitness factors (balance, gait, leg strength) increased and memory in the cognitive function sub-area improved in the participants who participated in the fumanet exercise program. The amount of change in gait was significantly different between the control and experimental groups. Conclusion: The fumanet exercise program included gait training using the learn, remember and repeat phased steps. Therefore, this study proposes using the fumanet exercise program to improve the elderly's cognitive function and physical fitness factor.

요인분석을 활용한 서울시 자치구/행정동의 지역균형지수 개발 (Development of Regional Balanced Index for Administrative Districts and Dongs in Seoul using Factor Analysis)

  • 김동근;박귀원;하소미;김도현
    • 품질경영학회지
    • /
    • 제49권3호
    • /
    • pp.375-392
    • /
    • 2021
  • Purpose: Regional gaps and conflicts between regions due to Korea's economic development and industrialization have become important issues, and the issue of balanced regional development at regional level has been discussed as the size of the region has increased recently. Although evaluation of regional balance was attempted through various regional balanced development indexes, it is inappropriate as a standard for determining regional balance in Seoul. Therefore, this study aims to develop objective evaluation methodologies and evaluation indicators for balanced development of administrative districts in Seoul, not existing city and national units. Methods: We looked at existing regional balanced development indexes, and suggested a new regional balanced index reflecting regional development, backwardness, and spatial characteristics in Seoul using factor analysis. Results: As a result of factor analysis, the regional balanced development index for administrative districts and administrative dongs consists of two factors (regional revitalization, financial power) and three factors (commercial density, social security demand, regional retardness), respectively. Then the regional balanced development index scores for 116 administrative districts and 423 administrative dongs are calculated by multiplying each factor by a weight obtained through experts' survey. Conclusion: The proposed regional balanced development index can be used as an objective and quantitative basis for regional balanced development within a city. Further research may include continuously adding new indicators that reflect the direction and scale of development.

화학적 기계 연마를 위한 탄성변형을 고려한 평균유동모델 (Average Flow Model with Elastic Deformation for CMP)

  • 김태완;구영필;조용주
    • Tribology and Lubricants
    • /
    • 제20권5호
    • /
    • pp.284-291
    • /
    • 2004
  • We present a three-dimensional average flow model considering elastic deformation of pad asperities for chemical mechanical planarization. To consider the contact deformation of pad asperities in the calculation of the flow factor, three-dimensional contact analysis of a semi-infinite solid based on the use of influence functions is conducted from computer generated three dimensional roughness data. The average Reynolds equation and the boundary condition of both force and momentum balance are used to investigate the effect of pad roughness and external pressure conditions on film thickness and wafer position angle.

SEA를 이용한 셸과 실린더의 최적 용접 조건 (Optimum Welding Position between Shell and Cylinder based on SEA)

  • 이장우;양보석;안병하
    • 한국소음진동공학회논문집
    • /
    • 제14권5호
    • /
    • pp.370-376
    • /
    • 2004
  • The overall aim of this paper is to determine coupling loss factor of welding point between shell and cylinder using loss factor and structural loss factor. For this purpose, two kinds of loss factor were adopted. One is loss factor of each sub structure, another is structural loss factor based on the complex welded or assembled structure. Using these two parameters, it ispossible to derive the coupling loss factor which represent characteristic condition of SEA theory. Coupling loss factor of conjunction in complex structure was expressed as power balance equation. The derived equation for a coupling loss factor has been simplified on the assumption of one way (uni-directional) power flow between multi-sub structures. Using these conditions, it is possible to find the equation of coupling loss factor expressed as above two loss factors. To check the effectiveness of above equation, this paper used two-stage application. The first approach was application between simple cylinder and shell. The next was adopted rotary compressor. Rotary compressor has three main conjunctions between shell and internal vibration part. This equation was applied to find out the optimum welding point with respect to reduce the noise propagation. It shows the effective tool to evaluate the coupling loss factor in complex structure