• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.1
• /
• pp.1-6
• /
• 2015

This paper investigates the longitudinal flight dynamics and stability of flapping-wing micro air vehicles. Periodic external forces and moments due to the flapping motion characterize the dynamics of this system as NLTP (Non Linear Time Periodic). However, the averaging theorem can be applied to an NLTP system to obtain an NLTI (Non Linear Time Invariant) system which allows us to use a standard eigen value analysis to assess the stability of the system with linearization around a reference point. In this paper, we investigate the dynamics and stability of a hawkmoth-scale flapping-wing air vehicle by establishing an LTI (Linear Time Invariant) system model around a hovering condition. Also, a direct time integration of full nonlinear equations of motion of the flapping-wing micro air vehicle is conducted to see how the longitudinal flight dynamics appear in the time domain beyond the reference point, i.e. hovering condition. In the study, the flapping-wing air vehicle exhibited three distinct dynamic modes of motion in the longitudinal plane of motion: two stable subsidence modes and one unstable oscillatory mode. The unstable oscillatory mode is found to be a combination of a pitching velocity state and a forward/backward velocity state.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.7
• /
• pp.1417-1426
• /
• 2011

Radiofrequency ablation through cardiac catheterization is one of minimally invasive intervention procedures used in drug resistant arrhythmia treatment. To facilitate more accurate and precise catheter navigation, systems for robotic cardiac catheter navigation have been developed and commercialized. The authors have been developing a novel robotic catheter navigation system. The system is a network-based master-slave configuration 3-DOF (Degree-Of-Freedom) robotic manipulator for operation with conventional cardiac ablation catheter. The catheter manipulation motion is composed of the translation (forward/backward) and the roll movements of the catheter and knob rotation for the catheter tip articulation. The master manipulator comprises an operator handle compartment for the knob and the roll movement input, and a base platform for the translation movement input. The slave manipulator implements a robotic catheter platform in which conventional cardiac catheter is mounted and the 3-DOF motions of the catheter are controlled. The system software that runs on a realtime OS based PC, implements the master-slave motion synchronization control in the robot system. The master-slave motion synchronization performance tested with step, sinusoidal and arbitrarily varying motion commands showed satisfactory results with acceptable level of steady state error. The developed system will be further improved through evaluation of safety and performance in in vitro and in vivo tests.

• Physical Therapy Rehabilitation Science
• /
• v.3 no.1
• /
• pp.69-75
• /
• 2014

Objective: We developed a Motor-Assisted Rowing Machine (MARM) for Spinal Cord Injury (SCI), by modification of the Concept II rowing machine, so that the seats could be operated automatically in a backward and forward direction by a motor. Design: Case report. Methods: Motor rowing consisted of a chair with inclination control, a motor system, control button, monitor, program, leg supporter, safety belt, and seat. The patients were 2 men rowing athletes with SCI, classified as American Spinal Injury Association class B, participated in the study. Level of thoracic injury ranged from T8 to T10. The subjects rowed at a self-selected stroke rate with 50 watts. Two different rowing methods (static rowing without movement of the seat, dynamic rowing using MARM) were assigned to each participant during 10 minutes; 34 reflective markers were attached to their full bodies. Kinematic data were collected using the Vicon motion analysis system. Based on the full body model provided as a default by the equipment. In the rowing exercise, the rowing motions were divided into Drive Phase and Recovery Phase. Results: The two rowing methods differ in handle range, seat range, handle and seat ratio, handle velocity, and seat velocity during static and dynamic rowing. The rowing exercise using a rowing machine developed MARM increased tendency to the range of motion in the dynamic method compared to the static method. Conclusions: The newly developed MARM could be a useful whole body exercise for people with SCI.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.6
• /
• pp.234-242
• /
• 1998

It has been demonstrated that the in-cylinder turbulence is enhanced by inclined swirl with a SCV(swirl control valve). The inclined-tumble flow measurement and analysis were performed for various types of intake systems that generated several different combinations of swirl ratio and tumble ratio in the cylinder. Experiments were conducted in a 4-valve optically accessed transparent research engine using a backward-scatter LDV mode under motoring condition at 1,000rpm. The influence of swirl/tumble levels on the characteristics of turbulence was analysed. This study presents experimental results of the inclined-tumble flow structure, including the flow motion phenomena, angular momentum and turbulence intensity.

• The Journal of Korea Robotics Society
• /
• v.3 no.4
• /
• pp.331-337
• /
• 2008

The field of robots is being widely accepted as a new technology today. Many robots are produced continuously to impart amusement to people. Especially the robot which operates with a wheelbarrow was enough of a work of art to arouse excitement in the audiences. All the wheelbarrow robots share the same technology in that the direction of roll and pitch are acting as balance controllers, allowing the robots to maintain balance for a long period by continuously moving forward and backward. However one disadvantage of this technology is that they cannot avoid obstacles in their way. Therefore movement in sideways is a necessity. For the control of rotation of yawing direction, the angle and direction of rotation are adjusted according to the velocity and torque of rotation of a motor. Therefore this study aimed to inquire into controlling yawing direction, which is responsible for rotation of a robot. This was followed by creating a simulation of a wheelbarrow robot and equipping the robot with a yawing direction controlling device in the center of the body so as to allow sideway movements.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.3
• /
• pp.91-97
• /
• 2018

PURPOSE: Stroke patients have reduced balance ability due to a lack of motion in the ankle joint. Elastic taping assists movement, and joint mobilization, a form of passive movement, enhances mobility. The purpose of this study was to determine the immediate effects on balance ability after anterior-to-posterior (A-P) talocrural joint mobilization combined with elastic taping in stroke patients. METHODS: Twenty stroke patients were divided into two groups: a joint mobilization with taping group (experimental group, n=10) and an elastic taping only group (control group, n=10). The experimental group underwent anteroposterior mobilization of the talus and elastic tape was applied to the calf and tibialis anterior muscles. The control group had elastic tape applied. Dynamic balanced abilities were assessed by using the BioRescue system. After 30 minutes of intervention, the forward, backward, left side, and right side sway areas ($mm^2$) were measured. RESULTS: Only the experimental group showed a significant increase in forward sway area after intervention. However, no significant differences were detected between the two groups. CONCLUSION: This study shows that A-P talocrural joint mobilization combined with elastic taping has a positive effect, producing an immediate increase in the forward balance ability of stroke patients. However, this study did not examine joint mobilization alone. In subsequent studies, it is necessary to examine the effect of joint mobilization only on balance in stroke patients.

• Journal of Institute of Control, Robotics and Systems
• /
• v.7 no.9
• /
• pp.717-722
• /
• 2001

This paper presents a methodology on the backward path tracking control of a trailer type robot which consists of two parts: a tractor and a trailer. It is difficult to control the motion of a trailer vehicle since its dynamics is non-holonomic. Therefore, in this paper, the modeling and parameter estimation of the system using a real-coded genetic algorithm(RCGA) is proposed and a backward path tracking control algorithm is then obtained based on the linearized model. Experimental results verify the effectiveness of the proposed method.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.3
• /
• pp.99-116
• /
• 2003

The purpose of this study was to kinematics factors on during round-off at end of beam-salto backward stretched with step-out to cross on balance beam. Four elite female gymnastics players participated as subject of this study. The methods of this study was analyzed using three dimentional analysis. The results and conclusion of this paper is obtained as follows ; 1. The phase of time was the most short time in board touch down phase and board take-off phase. Also, it was shown a more long time in total time compared to previous study. 2. The horizontal displacement of each phase was shown the most high levels in balance beam landing. The vertical displacement was display a non-linearity increase in board take-of phase, and it was shown the most high levels in vertical displacement during landing of balance beam. 3. The horizontal velocity of each phase was shown the most high levels in board touch down, and it was display a gradually decreased levels because flight during board take-of. The resultant velocity of CG on each phase was shown the most high levels in board touch down and board take-off. 4. The angle of hip joint was shown the most high levels as performed a motion in extension state during board take-off, and the angle of knee joint was display a increased levels because of flight cause body extension in board take-off. Also the angle of ankle joint was shown a increasing levels during board take-off. Considering to this results, it is suggest that the change of kinematics factors in board touch down and board take-off is key role on the effective board control.

• Journal of Korean Physical Therapy Science
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2018

Purpose : The purpose of this study was to examine the effects of ankle kinesio taping on postural control function during exercise in university students. Method : Thirty subjects were randomly allocated to three groups: Y taping group (n=20), I taping group (n=20) and Non-taping group (n=20). All groups underwent the same exercise program including stretching for 30 minutes. The exercise program proceeded in the following order: five minutes of stretching, a 20-minutes exercise program, and additional five 5 minutes of stretching. Of the eight exercise methods suggested by Purcell et al, seven were chosen (lateral shuffle, forward & backward running, agility ladder, figure-of-8, forward jogging while jumping over cones, wall jumps and zigzags); $90^{\circ}$ cuts with lateral shuffle were omitted. The postural control functions was measured participants's perceptions of stability, confidence, and reassurance using methods suggested by Purcell et al,. Result : The confidence was significant difference in I taping group compared to Non taping group. The reassurance was significant difference in Y taping group and I taping group compared to Non taping group. Conclusion : The Kinesio taping increased confidence, and reassurance during exercise in university students. Additional research on Kinesio taping for improving range of motion and agility is need.

• Journal of Biomedical Engineering Research
• /
• v.30 no.3
• /
• pp.247-254
• /
• 2009

We studied the postural response induced by plantar sole vibration with various frequencies(20, 60, 100Hz) and vibration zone(the anterior and posterior foot zone) of both soles during standing. Eight healthy young adults were exposed to 15s periods of plantar sole vibration while blindfolded. Body sway(COM, center of mass), the angle of neck, trunk, hip, knee, ankle and EMG of four lower limb muscles(tibialis anterior, lateral and medial gastrocnemial, soleus muscle) were recorded during 15s plantar sole vibration using 3D motion analysis system. Simulating each zone separately resulted in spatially oriented body tilts; oppositely directed backward and forward, respectively, the amplitude of which was proportional to the vibration frequency. EMG activity of lower limb muscles also varied according to the direction of the vibration zone and linearly according to the frequency. These findings led us to consider the plantar sole vibration as useful method of postural balance control and adjustment.