• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.582-594
• /
• 2016

Most studies on hybrid buses are on large-sized buses and not mid-sized low-floor buses. This study uses MATLAB simulation to evaluate the fuel efficiency of such buses powered by diesel. Based on the results, a hybrid electric vehicle system is recommended for the best combination of power and gear ratio. A parallel hybrid system was selected for the hybridization, which transmits front and rear wheel power independently. The necessary power to satisfy the target performance was calculated, and the applicable capacity area was designed. Dynamic programing was used to create and optimize a component sizing algorithm, which was used to scale the capacity of each component of the power source to satisfy the design criteria. The fuel efficiency rate, optimum power source capacity, and gear ratio can be improved by converting a conventional bus into a parallel hybrid bus.

• Atmosphere
• /
• v.18 no.4
• /
• pp.287-297
• /
• 2008

The vertical profiles and optical properties of Asian dust are investigated using ground-based measurements from 1998 to 2002. Vertical profiles of aerosol extinction coefficient are evaluated using MPL (Micro Pulse Lidar) data. Optical parameters such as aerosol optical thickness ($\tau$), ${\AA}ngstr\ddot{o}m$ exponent ($\alpha$), single scattering albedo ($\omega$), refractive index, and volume size distribution are analyzed with sun/sky radiometer data for the same period. We can separate aerosol vertical profiles into three categories. First category named as 'Asian dust case', which aerosol extinction coefficient is larger than $0.15km^{-1}$ and dust layer exists from surface up to 3-4km. Second category named as 'Elevated aerosol case', which aerosol layer exists between 2 and 6km with 1-2.5km thickness, and extinction coefficient is smaller than $0.15km^{-1}$. Third category named as 'Clear sky case', which aerosol extinction coefficient appears smaller than $0.15km^{-1}$. and shows that diurnal variation of background aerosol in urban area. While optical parameters for first category indicate that $\tau$ and $\alpha$ are $0.63{\pm}0.14$, $0.48{\pm}0.19$, respectively. Also, aerosol volume concentration is increased for range of 1 and $4{\mu}m$, in coarse mode. Optical parameters for second category can be separated into two different types. Optical properties of first type are very close to Asian dust cases. Also, dust reports of source region and backward trajectory analyses assure that these type is much related with Asian dust event. However, optical properties of the other type are similar to those of urban aerosol. For clear sky case, $\tau$ is relatively smaller and $\alpha$ is larger compare with other cases. Each case shows distinct characteristics in aerosol optical parameters.

• Environmental and Resource Economics Review
• /
• v.20 no.1
• /
• pp.1-31
• /
• 2011

By employing Environmental Input-Output Table 2005, which has 76 intermediate sector and 21 energy sources, this paper analyses the flow of energy demand and $CO_2$ after estimating an induced $CO_2$ emissions from 76 industrial sectors. Index of $CO_2$ intensity($CO_2/GDP$) and other index of $CO_2$ intensity($CO_2/calory$) showed that final demand sector uses more high calory energy source. Intermediate sector used less environmental friendly energy source and emit more $CO_2$ at same calory. Industries those has high induced $CO_2$ emissions are Thermal Power($32.587CO_2-g/Won$), Cement($10.370CO_2-g/Won$), Road Transportation($7.255CO_2-g/Won$), Cokes and Other Coal Products($5.791CO_2-g/Won$), Steam and Hot water supply, Sewage, Sanitary services($4.575CO_2-g/Won$). It is shown that industry such as Iron and Steel which has low $CO_2$ intensity, high backward linkage effect and high forward linkage effect makes high induced $CO_2$ emissions. Environmental load and $CO_2$ emissions in overall economy will decrease when not high $CO_2$ intensity industry but also low $CO_2$ intensity industry makes lower $CO_2$ intensity.

• Journal of Distribution Science
• /
• v.14 no.6
• /
• pp.99-106
• /
• 2016

Purpose - The antecedent to the relationship between the effect of the characteristics of strategic alliances and the performance of container liner shipping companies has been investigated in this study as container liner shipping companies' strategic alliances. It affects positively and negatively home, partner, and the third parties' performance in container liner shipping companies. Extensive literature reviews on shipper's strategic alliances reveal that strategic alliances in financial and non-financial performance of container liner shipping companies show the performance such as economic effects, business performance, global supply chain management performance, customer satisfaction, and forward integration and backward integration performance. The purpose of this study is to test empirically that the relationship between the characteristics of strategic alliances and financial and non-financial performance in container liner shipping companies. Structured equation modeling and confirmatory factor analysis were used to test the hypothesis using AMOS statistics program. Most previous researches focused on the relationship between the characteristics of strategic alliances and alliance types. There are few empirical studies that focus on business performance data because it is difficult to collect data in container liner shipping companies. However, this research measures financial and non-financial performance differently compared with the previous researches focusing on the characteristics of strategic alliances and alliance types measurements. Research design, data, and methodology - The conceptual model for the study is based on the studies of Lim (2010), Chen & Zhen (2009), and Wang & Meng (2014). The model is built around the factors of characteristics of strategic alliances and business performance. Cost, marketing, and service factors are regarded as proxy for the characteristics of strategic alliances. The financial and non-financial performance are regarded as proxy for the performance of strategic alliances. Based on the analysis of one hundred cases such as forwarder, shipper, and liner shipping companies, this study uses structural equation modeling to verify the effects of the characteristics of strategic alliances on business performance. Conclusions - This study provides container liner shipping companies to get some policy and practical implications in terms of the characteristics of strategic alliances and business performance. First, the cost factor for alliances characteristics has a positively significant influence on the financial and non-financial performance of strategic alliances. The cost factor relationship between high and low performance group does not have a significant difference on the performance of strategic alliances. Second, the marketing factor of alliances characteristics has a positively significant influence on the financial and non-financial performance of strategic alliances. The high performance group's marketing factor has a great non-financial performance than low performance group, but the low performance group's marketing factor has a grater financial performance than high performance group factor does. Third, the service factor of alliances characteristics has a negative influence on the non-financial performance of strategic alliances. The high performance group's service factor has a great non-financial performance than low performance group. Based on the findings from this study, related implications and future avenues deserve to be discussed.

• Journal of Distribution Research
• /
• v.15 no.5
• /
• pp.175-193
• /
• 2010

This paper has two objectives. One is to understand status of the distribution industry in Korea and compare it with industrialized countries. The other is an attempt to apply input-output(I-O) analysis to investigate the economic impacts of the distribution industry in the national economy for the year 2008. In the economy as a whole, the distribution industry represented about around 15 per cent employment and accounted for near 8 percent in GDP. The employment portion of the distribution in overall industry is almost same that of US, UK, and Japan, but shared portion in GDP is at least 3 per cent below these countries. Next, a static I-O framework is employed, focusing on two topics in its application. First, the impacts of the product or investment in the distribution industry on the product, value-added, and employment of other sectors are explored by using demand-driven model. Second, the national economic impacts of the distribution industry in Korea are looked into by using open model and inter-industry analysis. It can be summarized that the distribution industry has a high production-inducing effect, more worker and employment-inducing effect, a high forward and a low backward linkage effect. Finally, the implications and limitations of this study are discussed.

• Journal of Biomedical Engineering Research
• /
• v.26 no.6
• /
• pp.393-398
• /
• 2005

An electromechanical type is the most useful mechanism in the various pumping mechanisms. It, however, requires a movement converting system including a ball screw, a helical cam, or a solenoid-beam spring, which makes the device complex and may lessen reliability. Thus, the authors have hypothesized that an electromagnetic actuator mechanism can eliminate the movement converting system and that thereby enhance the mechanical reliability and operative simplicity of an electro­pneumatic pump. The purpose of this study was to show a novel application of electromagnetic actuator mechanism in pulsatile pump and to provide preliminary data for further evaluations. The electromagnetic actuator consists of stators with a single winding excitation coil and movers with a high energy density neodymium-iron-boron permanent magnet. A 0.5mm diameter wire was used for the excitation coil, and 1000 turns were wound onto the stators core with parallel. A prototype of extracorporeal electro-pneumatic pump was constructed, and the pump performance tests were performed using a mock system to evaluate the efficiency of the electromagnetic actuator mechanism. When forward and backward electric currents were supplied to the excitation coil, the mover effectively moved back and forth. The nominal stroke length of the actuator was 10mm. The actuator dimension was 120mm in diameter and 65mm in height with a mass of 1.4kg. The prototype pump unit was 150mm in diameter, 150mm in thickness and 4.5kg in weight. The maximum force output was 70N at input current of 4.5A and the maximum pump rate was 150 beats per minute. The maximum output was 2.0 L/minute at a rate of 80bpm when the afterload was 100mmHg. The electromagnetic actuator mechanism was successfully applied to construct the prototype of extracorporeal electro­pneumatic pump. The authors provide the above results as a preliminary data for further studies.

• Cartoon and Animation Studies
• /
• s.43
• /
• pp.211-230
• /
• 2016

First this research starts with agreement that comics is 'the sequential art'. It means that over two sequential panels makes how to recognize the story and this research owes to the connection of forward panel and backward panel. Webtoon, internet comics is also consisted to sequential panels. But only it is different with the publish comics by direction, shape, length and so on. So this research tries to make point of the connection between first panel and second panel. Especially it researches what types of connections between the last panel of first episode and the first panel of second one beyond the connections of panels at only episode. This research treats the types of gutter, 'connection' means to continue the same scenes or 'separation' does to devide the story and shows the new scenes. Weekly webtoon must have a kind of break time. The first panel of next episode should remind of the former story, it means easy technique. Otherwise some first panel don't show the same scenes or story so this study researches 130 artworks from the portal sites; Naver, Daum, mobile comics platform; Lezhin Comics and Toptoon, Corea.

• Cartoon and Animation Studies
• /
• s.43
• /
• pp.387-433
• /
• 2016

The ability to develop curriculums is a crucial factor in evaluating the expertise of a teacher who teaches culture & art education. Establishing a one-year plan for classes is an effort to create a well-designed curriculum for the year and also to foresee the big picture of classes in the corresponding year. A curriculum should not be composed of merely educational content or a series of knowledge and skills. It should be well-designed, based on principles of a coherent plan. This study examines organizational principles on which common curriculums are based on and looks at how a curriculum can be designed, especially for cartoon & animation classes, as part of Culture & Art education, and which factors should be considered in planning. In the process of forming such a curriculum, these steps should be followed: considering educational standards for cartoon animation classes; determining the learning experience, organizing the learning experience; and, lastly, evaluating the level of learning. In addition, effective teaching strategies that reflect the characteristics of a class on cartoon animation should be formulated. This study suggests actual examples of an effective annual curriculum for cartoon animation classes based on all the factors presented above.

• Korean Journal of Poultry Science
• /
• v.15 no.1
• /
• pp.53-60
• /
• 1988

The purpose of this presentation is to review the situation of the Cheju broiler industry peculiarized with the integrated production and marketing system to some degree, which is not prevailed in the whole broiler industry in Korea, so as to study the case of the Cheju industry from the viewpoint of an economic integration. The economic integration in the broiler industry is grouped into three patterns： non-integration, quasi-integration and complete integration, which generally exist under the different type of market competition. The quasi-integration tends to be formed at all phases where the complete integration is not fully implemented, but the non-integration has begun to change its nature into partially integrated structure. The Cheju broiler industry is characterized by the geographical location of isolated market so that factor supplies and broiler products are marketed in the different conditions from those of mainland Korea, somewhat in an oligopolistic pattern. It was since early 1980's that the industry successfully had three dressing plants merged into one by virtue of entire growers ownership, which opened an era of an integrated industry centered on the function of dressing birds. The case of Cheju broiler industry today is to be referred to as a typical quasi-integration which is coordinated the function between growing and dressing birds directly and extended the functional cooperation to distribution of products indirectly, while factor supplies are traded independently. As a result of a quasi-integration, the growers are able to receive a fixed price set by the dressing plant of growers that has the power to adjust the supply of and demand for broilers produced and consumed in the Island. There are some problems, however, in the integration of the Cheju broiler industry, stemming mainly from the process of the structure change, ： 1) the difficulty of controlling the production of broilers, 2) continuing pressure on the integration by non-integrated sectors, 3) the challenge on the stabilized broiler market from the mainland, 4) limited effectiveness of consumer education activities, and 5) lack of leadership for the industry development through integration. It is projected that the partially integrated Cheju broiler industry will be continually developed toward the direction of a complete integration in due course, as the currently independent supply sectors are to be backward integrated. The case of the Cheju broiler integration, therefore, could be used as a reference for making the whole broiler industry in Korea develop toward the integrated structure in the future.

• Korean Journal of Applied Biomechanics
• /
• v.19 no.3
• /
• pp.467-479
• /
• 2009

The purpose of this study was to present the quantitative data which riders can utilize teaching field by comparison analysis of kinematics according to skill level of rider during 2 strides rising trot with the JeJu's-Horse. Participated subjects was consisted of total 10 riders(unskilled: n=5, skilled: n=5). The method of experiment & analysis was based on 3D cinematography. Variables were consisted of temporal, linear & angular kinematics by each event & phase. The skilled assigned more ratio of elapsed time in air than support phase, had the less range of motion in up-down direction and more consistent velocity in lateral & forward direction and performed periodic up-down movement with alignment in vertical direction according to elapsing of phases. The skilled more flexed at elbow and extended backwardly according to elapsing of phases, while more flexed forwardly at hip & knee and plantarflexion at ankle. The skilled postured backward extension but the unskilled do forward flexion. That is, It was considered that the unskilled continued more unstable posture than the skilled during 2 strides in rising trot.