• 한국전문물리치료학회지
• /
• 제18권3호
• /
• pp.67-75
• /
• 2011

The purpose of this study was to assess the agreement of manual muscle testing (MMT) and test-retest reliability of a hand held dynamometer for the posterior gluteus medius muscle, with and without lumbar stabilization, using a pressure biofeedback unit for patients with low back pain. The pressure biofeedback unit was used to minimize the substitute motion of the lumbopelvic region during hip abduction in patients lying on their side. Fifteen patients with low back pain participated in this study. A tester determined the MMT grades of the posterior gluteus medius with and without the pressure biofeedback unit. Active hip abduction range of motion with an inclinometer and the strength of their posterior gluteus medius using a hand held dynamometer were measured with and without the pressure biofeedback unit in the MMT position. The agreement of the grade of muscle strength in the MMT, and intra-rater reliability of both the active hip abduction range of motion and the strength of posterior gluteus medius were analyzed using the weighted kappa and intraclass correlation coefficient (ICC), respectively. The agreement of MMT with the pressure biofeedback unit (weighted kappa=.92) was higher than the MMT (weighted kappa=.34)(p<.05). The inclinometer with pressure biofeedback unit measurement of the active hip abduction range of motion had an excellent intra-rater reliability (ICC=.90). Also, the hand held dynamometer with pressure biofeedback unit measure of strength of the posterior gluteus medius had a good intra-rater reliability (ICC=.85). Therefore, the test for muscle strength with pressure biofeedback unit will be a reliable method for the determination of the MMT grades or amount of posterior gluteus medius muscle strength and the measurement of the range of motion for hip abduction in patients with low back pain.

• Journal of Acupuncture Research
• /
• 제19권2호
• /
• pp.137-148
• /
• 2002

Objective : The low back pain was the main reason of receiving acupuncture treatment. Despite its widespread prevalence, objective data assessing the pain and the results of various forms of treatment were difficult to find in korea. In order to compare the value of different types of treatment, it was necessary to use standard and meaningful forms of assessment. Methods : Pain and functional disability scales for low back pain were reviewed for contents, measurement properties and current methodological issues. Results and Conclusions : 1. The SF-36 Bodily Pain Scale and the Graded Chronic Pain Scale were commonly used for the standard pain scale. 2. The Oswestry Disability Questionnaire and the Roland-Morris Disability Questionnaire were commonly used for the standard function scale. 3. When evaluated, there was no definite answer to the results of the treatment. In the literature, the responsiveness of the Roland-Morris Disability Questionnaire ranged from 2 to 8 points but clinically, the ranges should be minimally changed from 2 to 3 points. 4. In the future, scale for low back pain should be standardized in multiple dimension so that the computerized adaptive testing by Item Response Theory could be widely used.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.34-42
• /
• 2017

Material defects in the Steam Generator Tubes (SGT) of sodium cooled fast breeder reactor (PFBR) can lead to leakage of water into sodium. The water and sodium reaction will lead to major accidents. Therefore, the examination of steam generator tubes for the early detection of defects is an important requirement for safety and economic considerations. In this work, the Magnetic Flux Leakage (MFL) based Non Destructive Testing (NDT) technique is used to perform the defect detection process. The rectangular notch defects on the outer surface of steam generator tubes are modeled using COMSOL multiphysics 4.3a software. The obtained MFL images are de-noised to improve the integrity of flaw related information. Grey Level Co-occurrence Matrix (GLCM) features are extracted from MFL images and taken as input parameter to train the neural network. A comparative study on characterization have been carried out using feed-forward back propagation (FFBP) and cascade-forward back propagation (CFBP) algorithms. The results of both algorithms are evaluated with Mean Square Error (MSE) as a prediction performance measure. The average percentage error for length, depth and width are also computed. The result shows that the feed-forward back propagation network model performs better in characterizing the defects.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.708-710
• /
• 2001

In this paper, back commutation phenomena for iron chute chamber in AC low testing. For this experimental we used high speed camera and carried out with same prospective currents up to 10kA RMS. Hybrid arc quenching chambers which are composed with iron plate and insulating materials tested for reducing back commutation phenomena in interrupting process. It is shows that hybrid chambers which are various narrow slot path width reduces back commutation. As a result, a new type arc quenching chamber is to force the arc rapidly into a narrow insulating slot with iron plate. By this means the arc is lengthened and squeezed between insulating walls. Using this model, the behavior of the arc squeezed in the hybrid chamber and characteristics of arc voltage are also investigated.

• 한국자동차공학회논문집
• /
• 제4권4호
• /
• pp.18-26
• /
• 1996

Based on experimental analysis, the characteristics of pulsating pressure wave propagation is clarified by testing of 4-stroke gasoline engine. The pulsating pressure wave in exhaust system is generated by pulsating gas flow due to working of exhaust valve. The pulsating pressure wave is closely concerned to the loss of engine power according to back pressure and exhaust noise. It is difficult to exactly calculate pulsating pressure wave propagation in exhaust system because of nonlinear effect. Therefore, in the first step for solving these problems, this paper contains experimental model and analysis method which are applied two-port network analysis. Also, it shows coherence function, frequency response function, back pressure, and gradient of temperature in exhaust system.

• ETRI Journal
• /
• 제30권4호
• /
• pp.546-554
• /
• 2008

Phase-locked loops (PLLs) are among the most important mixed-signal building blocks of modern communication and control circuits, where they are used for frequency and phase synchronization, modulation, and demodulation as well as frequency synthesis. The growing popularity of PLLs has increased the need to test these devices during prototyping and production. The problem of distinguishing and classifying the responses of analog integrated circuits containing catastrophic faults has aroused recent interest. This is because most analog and mixed signal circuits are tested by their functionality, which is both time consuming and expensive. The problem is made more difficult when parametric variations are taken into account. Hence, statistical methods and techniques can be employed to automate fault classification. As a possible solution, we use the back propagation neural network (BPNN) to classify the faults in the designed charge-pump PLL. In order to classify the faults, the BPNN was trained with various training algorithms and their performance for the test structure was analyzed. The proposed method of fault classification gave fault coverage of 99.58%.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1996년도 춘계학술대회 논문집
• /
• pp.72-78
• /
• 1996

Based on experimental analysis, the characteristics of pulsating pressure wave propagation is clarified by testing of 4-stroke gasoline engine. The pulsating pressure wave in exhaust system is generated gyulsating gas flow due the working of exhaust valve. The pulsating pressure wave is closely concerned to the loss of engine power according to back pressure and exhaust noise. It is difficult to exactly calculate pulsating pressure wave nonlinear effect. Therefore, in the first step for solving these problems, this paper contains experimental model and analysis method which are applied two-port network analysis. Also, it shows coherence function, frequency response function. back pressure, and gradient of temperature in exhaust system.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2006년도 학술발표회 논문집
• /
• pp.25-32
• /
• 2006

We present a imaging method of seismic sources by time reversal propagation of seismic waves. Time-reversal wave propagation is actively used in medical imaging, non destructive testing and waveform tomography. Time-reversal wave propagation is based on the time-reversal invariance and the spatial reciprocity of the wave equation. A signal is recorded by an array of receivers, time-reversed and then back-propagated into the medium. The time-reversed signal propagates back into the same medium and the energy refocuses back at the source location. The increasing power of computers and numerical methods makes it possible to simulate more accurately the propagation of seismic waves in heterogenous media. In this work, a staggered-grid finite-difference solution of the elastic wave equation is employed for the wave propagation simulation. With numerical experiments, we show that the time-reversal imaging will enable us to explore the spatio-temporal history of complex earthquake.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제36권1호
• /
• pp.45-53
• /
• 2009

최근 GUI 컴포넌트는 소프트웨어의 중요한 성공 요소이다. 따라서 GUI 컴포넌트는 반드시 검증되어야 한다. 그러나 소프트웨어의 GUI 검증을 위한 테스트에는 많은 시간과 비용이 소요된다. 이러한 자원의 소비를 줄이기 위해서는 GUI 테스트의 자동화가 필연적이다. 본 논문에서는 GUI 테스트를 수행하기 위해 고려해야 할 문제를 논하고 기존치 Record & Play-back 기술을 기반으로 한 GUI 테스트 케이스 생성 기법을 보완한다. 이를 위해 스파이 기술을 이용한 이벤트 생성 방법과 이렇게 생성된 이벤트를 그룹화하여 다양하고 효과적인 시나리오 생성 방법을 제안한다. 그리고 이렇게 생성된 시나리오를 바탕으로 GUI 테스트 케이스 생성 방법을 기술한다.

• 한국산학기술학회논문지
• /
• 제8권5호
• /
• pp.1152-1158
• /
• 2007

현재 미국, 유럽, 일본 등을 중심으로 기존의 다짐평가시험보다 빠르고 간편하게 다짐도를 평가할 수 있는 장비들이 개발되어 사용되고 있지만 국내에서는 아직 이러한 다짐평가장비의 사용이 보편화 되어 있지 않다. 이 연구에서는 모형지반에서 진동핸드로울러를 이용하여 다짐을 실시하고 기존 다짐평가 방법인 들밀도시험결과와 새로운 다짐평가장비인 지오게이지(geogauge), 간이지지력측정기(CASPFOL), 동평판재하시험기(LFWD), 동적콘관입시험기(DCP) 결과를 비교 분석하고 시험장비간 상관성 평가를 수행 하였다. 그 결과 상관계수는 $70{\sim}95%$로 대부분 높은 상관성을 보이는 것으로 나타났다.