• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.577-582
• /
• 2004

The azacrown compounds, 1,4-dioxa-7,10,13-triazacyclopentadecane-N,N',N''-triacetic acid, $N-ac_3[15]aneN_3O_2(II_a)$ and 1,4-dioxa-7,10,13-triazacyclopentadecane-N,N',N''-tripropioc acid, $N-pr_3[15]aneN_3O_2(II_b)$ were synthesized by modified methods. Potentiometry was used to determine the protonation constant of the $N-ac_3[15]aneN_3O_2\;and\;N-pr_3[15]aneN_3O_2$. The stability constants of complexes of the trivalent metal ions of $Ce^{3+},\;Eu^{3+},Gd^{3+},and\;Yb^{3+}$ and divalent metal ions of $Co^{2+},\;Ni^{2+},\;Cu^{2+},\;and\;Zn^{2+}$ with the ligands $N-ac_3[15]aneN_3O_2\;and\;N-pr_3[15]aneN_3O_2$ have been determined at $25{\pm}0.1^{\circ}C$ in 0.1 M $NaClO_4$ solution by potentiometric methods. The metal ion affinities of the two triazamacrocyclic ligands with three pendant acetate or propionate groups are compared to those obtained for the similar ligands, 1,7-dioxa-4,10,13-triazacyclopentadecane-N,N',N''-triacetic acid, and 1,7-dioxa-4,10,13- triazacyclopentadecane-N,N',N''-tripropioc acid. The trends in stability of complexes for different metal ions due to changes in the nitrogen position of the donor atoms of the ligand are discussed.

• Food Science and Preservation
• /
• v.15 no.3
• /
• pp.352-360
• /
• 2008

The extraction yield and storage stability of Codium fragile pigments extracted in acetone, ethanol or methanol were studied. Methanol was the most effective solvent for pigment extraction, providing an extraction yield of $25.0{\pm}2.10\;mg/g$ (my base). As shown by TLC and HPLC analysis, chlorophyll a(0.40 mg/g) and chlorophyll b(1.94 mg/g) were the major pigment components in dried Codium fragile. The total chlorophyll content of Codium fragile stored a 40C in light or dark conditions for 30 weeks remained at 23.2% and 58.4% respectively. The effect of metal ions ($Cu^{++}$, $Zn^{++}$, $Fe^{++}$ and $Mg^{++}$) on pigment stability was analyzed Among the four metal ions $Cu^{++}$ was the most effective stabilizer of Codium fragile pigments during storage, and $Zn^{++}$ ion was the second most effective. In the presence of 1 mM $Cu^{++}$, the total chlorophyll retained in Codium fragile stored at 40C in light or dark conditions was increased to 47.0% and 88.8% after 30 weeks storage, respectively. The optimum concentrations of $Zn^{++}$ and $Cu^{++}$ for pigment stabilization under dark conditions were 0.5 mM and 0.1 mM, respectively.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.541-548
• /
• 2009

Iron coated media (activated carbon, sand and starfish) were prepared at pH 4 and applied for the treatment of landfill leachate containing organic compounds and soluble metal ions such as $Zn^{2+},\;Cu^{2+},\;Mn^{2+}$ in batch and column experiment. The amount of iron coated in media was analyzed with EPA 3050B method. The removal efficiency of metal ions and phenol was compared with iron coated media. The amount of iron coated in Fe-AC and ICS(iron coated sand) were 1,612 mg/kg and 1,609 mg/kg, respectively, while it was higher with 1,768 mg/kg in ICSF(iron coated starfish). The result of batch study represent the highest removal efficiency in the treatment of wastewater using iron coated starfish. In column study, the removal efficiency of phenol and metal ions was higher in multi-layered system of ICS, Fe-AC and ICSF compared to single layered system. Breakthrough time in the effluent was relatively enhanced for $Cu^{2+}$ and $Zn^{2+}$ in multi-layered system while the removal efficiency of $Mn^{2+}$ were not varied much. Therefore, multi-layered system was identified as the better system for the treatment of wastewater containing of metal ions and organic compound.

• Journal of the Korean Chemical Society
• /
• v.12 no.2
• /
• pp.65-80
• /
• 1968

The physico-chemical properties of nine selected thallium borosilicate glasses and other 21 supplementary compositions were investigated. Their composition-property curves are found to be in many respects analogous to those of other borosilicate glasses containing lithia, soda, and lead oxide. It is indicated that certain minima found in the composition-property curves of thallium borosilicate glasses might be caused by a change in boron coordination as has been observed to occur in the $Na_2O-B_2O_3-SiO_2$ glasses. Typical effects of thallium ions on the borosilicate glass are summarized as follows: 1) Addition of thallium ions increased density, refractive index, water solubility, linear coefficient of thermal expansion, and dielectric constant. 2) Increased concentration of thallium decreased the softening point of the glasses, caused fluorescence under ultraviolet radiation and smeared out the absorption edges up to $15{\mu}$ in the infrared region. An extensive liquid immiscibility was found by replication electron microscope technique in the $Tl_2O-B_2O_3-SiO_2$ system. The immiscibility covers a composition range roughly from 55 wt. % Tl2O to the binary system $B_2O_3-SiO_2.$ By acid treatment, it was found that the immiscible glass consists of separate silica-rich and boron-rich phases.

• Analytical Science and Technology
• /
• v.18 no.1
• /
• pp.27-34
• /
• 2005

$Li_2B_4O_7$ and $Na_2B_4O_7$ were synthesized with boron isotopic standard material for the measurement of boron isotopes of positive ions (PTIMS) such as $Li_2BO_2{^+}$ (mass 56, 57) and $Na_2BO_2{^+}$ (mass 88, 89) instead of boron mass 10 and 11. The negative ions (NTIMS) such as $^{10}BO_2{^-}$ and $^{11}BO_2{^-}$(mass 42와 43) were also measured with the same boron isotopic standard material. The precision and accuracy were compared between each method, and prescan of isobaric effect was studied. Good result was obtained from NTIMS method which provided the stable and enough peak intensities with good precision and accuracy. The measurement of boron isotopes were performed in ground water sample with about 8 ng-B ($5{\mu}L$ sample solution) obtained from IAEA for international inter-comparison analysis. The standard deviation was found to be 0.03%. Boron content of this ground water was measured using the NTIMS-IDMS. The result was $1.65{\pm}0.003ug-B/mL$ which was better precision compared to the ICP-AES result.

• Journal of Microbiology and Biotechnology
• /
• v.1 no.3
• /
• pp.176-181
• /
• 1991

Studies on the optimum conditions for dextran production and the properties of dextransucrase (DS) were performed with Leuconostoc mesenteroides from Sikhae and Leuconostoc mesenteroides NRRL B-512(F). Dextransucrases were partially purified by lyophilization of the culture supernatant and subsequent gel chromatography on Bio-Gel A-5(m). The storage stabilities of Sikhae DS and B-512(F) DS were decreaed by the addition of dextranase. The optimum conditions for the enzyme stability were pH 5 and below $30^{\circ}C$. The B-512(F) DS lost the activity at pH 4, while Sikhae DS had 30% of the activity at the same pH. The activity of DS was decreased by EDTA. confirming the metalloprotein character of the enzymes, and was restored by the addition of calcium ions. Concanavalin A completely removed the activity of DSs, confirming the glycoprotein character of the enzymes.

• Carbon letters
• /
• v.11 no.2
• /
• pp.127-130
• /
• 2010

Boron doped fullerene $C_{60}$ ($B:C_{60}$) films were prepared by the thermal evaporation of $C_{60}$ powder using argon plasma treatment. The morphology and structural characteristics of the thin films were investigated by scanning electron microscope (SEM), Fourier transform infra-red spectroscopy (FTIR) and x-ray photo electron spectroscopy (XPS). The electrochemical application of the boron doped fullerene film as a coating layer for silicon anodes in lithium ion batteries was also investigated. Cyclic voltammetry (CV) measurements were applied to the $B:C_{60}$ coated silicon electrodes at a scan rate of $0.05\;mVs^{-1}$. The CV results show that the $B:C_{60}$ coating layer act as a passivation layer with respect to the insertion and extraction of lithium ions into the silicon film electrode.

• Korean Journal of Materials Research
• /
• v.12 no.3
• /
• pp.220-224
• /
• 2002

The oxide scales formed on $Ni_3Al$-7.8%Cr-1.3%Zr-0.8%Mo-0.025%B after oxidation at 900, 1000 and 110$0^{\circ}C$ in air were studied using XRD, SEM, EPMA and TEM. The oxide scales consisted primarily of $NiO,\; NiAl_2O_4,\;{\alpha}-Al_2O_3,\; monoclinic-ZrO_2,\; and \;tetragonal-ZrO_2$. The outer layer of the oxide scale was rich in Ni-oxides, whereas the internal oxide stringers were rich in Al-oxides and $ZrO_2$. Within the above oxide scales, Cr and Mo tended to exist as dissolved ions.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.12
• /
• pp.1082-1086
• /
• 2007

Optical characteristics of $YCOB(YCa_4B_3O_{10})$, known as a crystal of self frequency doubling, was investigated when Yb and Er ions were co-doped 20 % and 2 %, respectively. The absorption cross section of Er,Yb:YCOB crystal at $1.0\;{\mu}m$ was larger than that of Yb:YCOB, which means that the former was profitable for more energy absorption than the latter. The fluorescent lifetime at $1.5\;{\mu}m$ was measured to be 1.27 ms at room temperature, and lengthened to 1.54 ms and 1.62 ms at low temperatures of 77 K and 6 K, respectively. The line widths of fluorescent spectrum at $1.5\;{\mu}m$ were getting narrower as lowering temperature. However, we didn't observe a temperature dependent peak wavelength shift.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.08a
• /
• pp.145.4-145
• /
• 1998