• International Journal of Concrete Structures and Materials
• /
• 제3권1호
• /
• pp.25-32
• /
• 2009

A non-destructive testing (NDT) method for evaluating physical properties of concrete including the compressive strength is highly desirable. This paper presents such an NDT method based on measurement of electromagnetic (EM) properties of the material. Experiments are carried out on cement mortar with different water/cement (W/C) ratios. Their EM properties including the conductivity and the dielectric constant are measured at different exposure conditions and curing periods over a wide frequency range of the EM wave. The compressive strength of these specimens is also tested. It is found that both the conductivity and the dielectric constant increase as the W/C ratio decreases and the curing period increases, which lead strength development in the specimens. A linear correlation is observed between the averaged EM properties over the 5 to 20 GHz frequency range and the measured compressive strength, demonstrating the effectiveness of the EM property-based NDT method in evaluating strength of OPC mortar.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2003년도 유체기계 연구개발 발표회 논문집
• /
• pp.385-390
• /
• 2003

Shape of a multi-blades centrifugal fan is optimized by response surface method based on three-dimensional Navier-Stokes analysis. For numerical analysis, Reynolds-averaged Wavier-Stokes equations with standard $k-{\varepsilon}$ turbulence model are transformed into non-orthogonal curvilinear coordinate system, and are discretized with finite volume approximations. Due to the large number of blades in this centrifugal fan, the flow inside of the fan is regarded as steady flow by introducing the impeller force models for economic calculations. Optimizations with and without constraints are carried out. Design variables, location of cur off, radius of cut off, expansion angle of scroll and width of impeller were selected to optimize the shapes of scroll and blades. Data points for response evaluations were selected by D-optimal design, and linear programming method was used for the optimization on the response surface. As a main result of the optimization, the efficiency was successfully improved. The correlation of efficiency with relative size of inactive zone at the exit of impeller is discussed as well as with average momentum fluxes in the scroll.

• Bulletin of the Korean Chemical Society
• /
• 제20권7호
• /
• pp.815-818
• /
• 1999

The method of calculating the excess Helmholtz free energy from the averaged effective acceptance ratio for the Lennard-Jones fluid and the inverse twelve fluid has been slightly modified and applied to the two-center-Lennard-Jones liquid. The excess Helmholtz free energy is calculated directly from the average of the modified effective acceptance ratio through a single Metropolis Monte Carlo simulation. Therefore this method does not need any reference system. The results of the present method were satisfactory compared with those of the perturbation theories and the overlap ratio method.

• 수산해양기술연구
• /
• 제41권4호
• /
• pp.296-305
• /
• 2005

Acoustic target strength (TS) of 12 commercially important fish species caught in the Korean waters had been investigated and their results were presented. Laboratory measurements of target strength on 12 dominant fish species were carried out at a frequencies of 75 kHz by single beam method under the controlled condition of the water tank with the 241 samples of dead and live fishes. The target strength pattern on individual fish of each species was measured as a function of tilt angle, ranging from $-45^{\circ}$ (head down aspect) to $45^{\circ}$ (head up aspect) in $0.2^{\circ}$ intervals, and the averaged target strength was estimated by assuming the tilt angle distribution as N ($-5.0^{\circ}$, $^15.0{\circ}$). The 75 to fish length relationship for each species was independently derived by a least - squares fitting procedure. Also, a linear regression analysis for all species was performed to reduce the data to a set of empirical equations showing the variation of target strength to fish length and fish species. An empirical model for fish target strength(TS, dB) averaged over the dorsal aspect of 158 fishes of 7 species and which spans the fish length(L, m) to wavelength(${\lambda}$, m) ratio between 6.2 and 21.3 was derived: TS: 27.03 Log(L)-7.7Log(${\kanbda}$)-17.21, ($r^2$=0.59).

• 전기전자학회논문지
• /
• 제16권2호
• /
• pp.138-144
• /
• 2012

본 논문에서는 DSF 릴레이 MC-CDMA 시스템에 대한 의사 성능분석 기법을 다중경로 레일리 페이딩 채널에 대해 제안한다. 오류율 성능과 복잡도를 고려하여 MC-CDMA 시스템의 결합기법으로는 MMSE-C 방법을 사용한다. 평균 오류율 유도를 위하여 DSF-Relay 기법의 릴레이 노드들에서 발생할 수 있는 오류 사건에 기반한 분석 방법을 우선 채택한다. 그리고 발생가능한 모든 오류 사건들을 고려한 형태로 평균 오류율 표현한다. 또한 제안된 의사 분석적 성능분석 결과는 모의실험 결과와의 비교를 통하여 검증하도록 한다. 최종적으로 유도된 성능분석 결과가 다양한 다중경로 레일리 페이딩 채널 환경을 반영하면서 DSF 릴레이 MC-CDMA 시스템의 성능 상한 값을 측정할 수 있는 분석 툴이 될 수 있음을 확인한다.

• 한국어류학회지
• /
• 제21권1호
• /
• pp.15-22
• /
• 2009

성숙한 왕종개 Iksookimia longicorpa를 2007년 6월에 전라북도 남원시 운봉읍에서 채집하여 난발생과 초기생활사를 연구하였다. 채집된 성숙한 개체는 LHRH를 주사하였으며 건식법으로 수정시켰다. 성숙란은 분리침성란으로 밝은 노란색이었으며 난경은 평균 $1.53{\pm}0.07mm$였다. 수온 $23{\sim}25^{\circ}C$에서 수정 후 50~72시간 사이에 부화하였으며 크기는 전장 $5.1{\pm}0.23mm$였다. 부화 후 4일경에 난황이 거의 흡수 되었고 전장 $7.1{\pm}0.47mm$로 성장하였다. 부화 후 25일 경에 지느러미 기조가 모두 정수로 되어 치어기에 달하였으며 전장 $12.8{\pm}0.49mm$로 성장하였다. 부화 후 100일 후에 반문모양과 외부형태가 성어와 유사하였으며 전장 $38.5{\pm}2.95mm$로 성장하였다.

• 한국항행학회논문지
• /
• 제7권1호
• /
• pp.14-21
• /
• 2003

장거리 $3{\times}40$ Gbps 강도 변조 직접 검파 방식의 파장 분할 다중 시스템에서 색 분산과 자기 위상 변조에 의한 광 펄스 왜곡을 최상으로 보상할 수 있는 최적의 펌프 전력을 컴퓨터 시뮬레이션을 통해 살펴보았다. 본 논문에서 고찰한 파장 분할 다중 시스템은 전체 전송로 중간에 HNL-DSF (highly nonlinear dispersion shifted fiber)의 광 위상 공액기를 두어 광 신호 왜곡을 보상하는 경로 평균 강도 근사 (PAIA : Path-Averaged Intensity Approximation) 기법의 MSSI (Mid-Span Spectral Inversion)가 적용된 시스템이다. 우선 HNL-DSF는 광대역 파장 분할 다중 전송에서 매우 유용한 비선형 매질이라는 것을 확인할 수 있었고, 두 번째 광 전송로로 입사되는 공액파의 전력을 입력 광 신호의 전력과 같아지게 하는 HNL-DSF 광 위상 공액기의 펌프 전력에서 최상의 보상이 얻어지는 것을 확인할 수 있었다. 결과적으로 PAIA MSSI 기법에 전송 거리에 관계한 최적 펌프 전력을 갖는 HNL-DSF 광 위상 공액기를 적용하면 장거리 대용량 파장 분할 다중 시스템의 구현이 가능하다는 것을 확인할 수 있었다.

• 한국수자원학회논문집
• /
• 제44권6호
• /
• pp.429-438
• /
• 2011

In order to simulate a free surface flow in a trench channel, a three-dimensional incompressible unsteady Reynolds-averaged Navier-Stokes (RANS) equations are closed with the ${\kappa}-{\epsilon}$ model. The artificial compressibility (AC) method is used. Because the pressure fields can be coupled directly with the velocity fields, the incompressible Navier-Stokes (INS) equations can be solved for the unknown variables such as velocity components and pressure. The governing equations are discretized in a conservation form using a second order accurate finite volume method on non-staggered grids. In order to prevent the oscillatory behavior of computed solutions known as odd-even decoupling, an artificial dissipation using the flux-difference splitting upwind scheme is applied. To enhance the efficiency and robustness of the numerical algorithm, the implicit method of the Beam and Warming method is employed. The treatment of the free surface, so-called interface-tracking method, is proposed using the free surface evolution equation and the kinematic free surface boundary conditions at the free surface instead of the dynamic free surface boundary condition. AC method in this paper can be applied only to the hydrodynamic pressure using the decomposition into hydrostatic pressure and hydrodynamic pressure components. In this study, the boundary-fitted grids are used and advanced each time the free surface moved. The accuracy of our RANS solver is compared with the laboratory experimental and numerical data for a fully turbulent shallow-water trench flow. The algorithm yields practically identical velocity profiles that are in good overall agreement with the laboratory experimental measurement for the turbulent flow.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.122-133
• /
• 1997

Numerical analysis using finite volume method has been carried out to examine the effect of degree of superheat of LiBr aqueous solution on heat and mass transfer occurred in absorption process. According to the result of this study, it was found that refrigerant vaper was generated at the entrance region of absorber when LiBr aqueous soltion was superheated. As the degree of superheat increases, heat transfer rate increases and vapor absorption rate decreases. The increase in averaged Nusselt and Sherwood numbers could be found as film Reynolds number increases. The larger the degree of superheat, the greater the averaged Nusselt and Sherwood numbers.

• 대한조선학회논문집
• /
• 제37권1호
• /
• pp.60-66
• /
• 2000

고속 프로펠러를 대상으로 캐비테이션 발생 특성에 가장 큰 영향을 미치는 2차원 날개단면의 앞날 형상에 관한 연구를 수행하였다. 앞날 주위의 유동장을 해석하기 위하여 비압축성 RANS(Reynolds Averaged Navier-Stokes)방정식을 유한체적법(FVM)으로 차분하는 수치해석기법을 사용하였다. 또한 패널법을 이용하여 캐비테이션 발생두께를 예측하였다. 예측된 결과들은 실험결과와 비교해서 타당함을 알 수 있었으며, 이 결과를 이용하여 새로운 단면을 설계하였다.