• The korean journal of orthodontics
• /
• v.45 no.3
• /
• pp.105-112
• /
• 2015

Objective: A recently developed facial scanning method uses three-dimensional (3D) surface imaging with a light-emitting diode. Such scanning enables surface data to be captured in high-resolution color and at relatively fast speeds. The purpose of this study was to evaluate the accuracy and precision of 3D images obtained using the Morpheus 3D$^{(R)}$ scanner (Morpheus Co., Seoul, Korea). Methods: The sample comprised 30 subjects aged 24.34 years (mean $29.0{\pm}2.5$ years). To test the correlation between direct and 3D image measurements, 21 landmarks were labeled on the face of each subject. Sixteen direct measurements were obtained twice using digital calipers; the same measurements were then made on two sets of 3D facial images. The mean values of measurements obtained from both methods were compared. To investigate the precision, a comparison was made between two sets of measurements taken with each method. Results: When comparing the variables from both methods, five of the 16 possible anthropometric variables were found to be significantly different. However, in 12 of the 16 cases, the mean difference was under 1 mm. The average value of the differences for all variables was 0.75 mm. Precision was high in both methods, with error magnitudes under 0.5 mm. Conclusions: 3D scanning images have high levels of precision and fairly good congruence with traditional anthropometry methods, with mean differences of less than 1 mm. 3D surface imaging using the Morpheus 3D$^{(R)}$ scanner is therefore a clinically acceptable method of recording facial integumental data.

• Journal of Korean Medicine Rehabilitation
• /
• v.19 no.4
• /
• pp.175-187
• /
• 2009

Objectives : This study was performed to evaluate the effect of facial rejuvenation acupuncture on cases of sequela of facial nerve palsy. Methods : This study was carried out in respect of 5 cases of sequela of facial nerve palsy patients which had been treated in Dong-Shin university oriental hospital from 2009 year with House-Brackmann grading system(HBGS) above Grade IV. In this study the patients were treated by facial rejuvenation acupuncture. The effect of the treatment were evaluated via scales and picture. Results : After treatment with facial rejuvenation acupuncture, 5 patients improved H-B scale and symptoms of the sequela of facial nerve palsy. The average of H-B scale was increased from 3.2 to 6.4. There also formed forehead folds, better blinking of the eyes and improved asymmetry of the left and right face. Conclusions : In the study, facial rejuvenation acupuncture showed marked improvement in sequela of facial nerve palsy. Randomized-controlled trial for further evaluation will be needed in the future.

• Korean Journal of Health Education and Promotion
• /
• v.15 no.1
• /
• pp.1-30
• /
• 1998

A study on skin care was conducted in order to develop proper skin care program and disseminate the Information to the consumers. The study was performed from October 2, 1997 though April 30 1997 by using questionnaires. The subjects were 1,793 from lug cities of Seoul, Pusan and, and 800 from medium and small cities of Kyongsan, Kimchon, Mokpo and KimHae cities. All subjects were females over 20 years. 1. 64.3% of the subjects said that they chose the massage packs after considering their skin condition. 55.1% of the subjects said that they did not know the side effects of the massage packs. 2. 53.3% of the subjects reported that they knew the cause of acne. and 73.3% of the respondents reported that they knew the nature of their body classified by oriental medicine. 3. The average knowledge and attitude was 10.61 :t3.46%( who it is converted to percent, it is 53.1%). The upper limit was 18.9% and lower limit was 19.0%. 4. The factors which are under the influence on knowledge of skin care were the times of massage, education level, the height of subjects, disease of skin, age, the degree of fatty body, the hour of make-up(R2=0.137). 5. The factors which are under the influence on the times of massage were education level, the experience of skin side effect, the status of physic8I health and the birth place of the subjects(R2=0.139). 6. The main factors which had significant effect on the status of face skin health were the status of physical health, economic status, age, the side effect of skin cosmetic, and the hour of make-up(R2=0.140). 7. Finally, it is recommended that training package on side effect of cosmetics, massage, physical characteristics and proper way of make-ups, and the public should be educated on the above mentioned areas.

• Journal of the Korean Society of Safety
• /
• v.33 no.4
• /
• pp.111-118
• /
• 2018

Korea is facing a surge in the aging population, showing that population aged 65 and above will be accounted for 42.5% of the total population in 2065 with the emphasis on the over-80 population consisting of 19.2%. In response to this abrupt change in population structure, the number of traffic fatality accident referring to older driver as aged 65+ years had been increasing from 605 fatalities in 2011 to 815 fatalities in 2015 resulting in increases in 34.7% in oppose to happening to decreases in 17.2% about non-older driver. With Logit analysis based on Newton-Raphson algorithm utilizing older driver's traffic fatality data for the 2011-2015 years, it was found that the likelihood of an accident resulting in a fatality for super older driver aged 80 years and above considerably increased compared to other older driver with aging classification: 2.24 times for violation of traffic lane, 2.04 times for violation of U-turn, 1.48 times for violation of safety distance, 1.35 times for violation of obstacle of passing; also average annual increase of traffic accident cost related to super older driver was fairly increased rather than other older driver groups. Hence, this study proposes that improving and amending transport safety system and Road Traffic Act for super older driver needs to be urgently in action about license management, safe driving education, etc. when considering the increase of over-80 population in the near future. Also, implementing a social agreement with all ages and social groups to apply with advanced driver assistance system for older driver groups will be able to become a critical factor to enhance safe driving over the face of the country.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.4C
• /
• pp.514-523
• /
• 2004

In this paper, a new intelligent moving target tracking and surveillance system basing on the pan/tilt-embedded stereo camera system is suggested and implemented. In the proposed system, once the face area of a target is detected from the input stereo image by using a YCbCr color model and then, using this data as well as the geometric information of the tracking system, the distance and 3D information of the target are effectively extracted in real-time. Basing on these extracted data the pan/tilted-embedded stereo camera system is adaptively controlled and as a result, the proposed system can track the target adaptively under the various circumstance of the target. From some experiments using 80 frames of the test input stereo image, it is analyzed that standard deviation of the position displacement of the target in the horizontal and vertical directions after tracking is kept to be very low value of 1.82, 1.11, and error ratio between the measured and computed 3D coordinate values of the target is also kept to be very low value of 0.5% on average. From these good experimental results a possibility of implementing a new real-time intelligent stereo target tracking and surveillance system using the proposed scheme is finally suggested.

• Journal of Environmental Health Sciences
• /
• v.35 no.6
• /
• pp.500-509
• /
• 2009

Passive samplers have been used for many years for the sampling of organic vapors in work environment atmospheres. Currently, all passive samplers used in domestic occupational monitoring are foreign products. This study was performed to evaluate variable parameters for the development of passive organic samplers, which include the geometry of the device and diffusive length for the sampler design. Four prototype diffusive lengths; A-1(4.5 mm), A-2(7.0 mm), A-3(9.5 mm), A-4(12.0 mm) were tested for adsorption performances to a chemical mixture (benzene, toluene, trichloroethylene, and n-hexane) according to the US-OSHA's evaluation protocol. A dynamic vapor exposure chamber developed and verified by related research was used for this study. The results of study are as follows. The results in terms of sampling rate and recommended sampling time test indicate that the most suitable model was A-3 (9.5 mm diffusive lengths on both sides) for passive sampler design in time weighted average (TWA) assessment. Sampling rates of this A-3 model were 45.8, 41.5, 41.4, and 40.3 ml/min for benzene, toluene, trichloroethylene, and n-hexane, respectively. The A-3 models were tested on reverse diffusion and conditions of low humidity air (35% RH) and low concentrations (0.2 times of TLV). These conditions had no affect on the diffusion capacity of samplers. In conclusion, the most suitable design parameters of passive sampler are: 1) Geometry and structure - 25 mm diameter and 490 $mm^2$ cross sectional area of diffusion face with cylindrical form of two-sided opposite diffusion direction; 2) Diffusive length - 9.5 mm in both faces; 3) Amount of adsorbent - 300 mg of coconut shell charcoal; 4) Wind screen - using nylon net filters (11 ${\mu}m$ pore size).

• Journal of the Korean Society of Costume
• /
• v.51 no.7
• /
• pp.147-165
• /
• 2001

The objective of this study was to develop the Jeogori Pattern for 9 to 10 year-old boys To determine the measurement items for the Jeogori Pattern making, applied factor analysis, correlation analysis and regression analysis to the 37 measurement items of the 9 to 10 year-old boys classified as a standard somatotype. To understand the shape and variation of the body surface, analyzed the replica of the upper body surface that was obtained by the method of using surgical tape. Be based on the results of the above studies, designed the Jeogori Pattern. The designed pattern was evaluated by the sensory test. The drafting methods of Jeogori Pattern obtained are as follows. $\circled1$ The measurement items are Bust Girth, Center Back Waist Length, Neck Width, and Hwajang Length. $\circled2$ Jeogori Length Center Back Waist Length$\times$4/3 $\circled3$ Front Body Girth(1/2) : B/2 + 1.5cm Back Body Girth(1/2) : B/2 + 3.5cm $\circled4$ Jin-Dong : B/4 + 3cm $\circled5$ Back Godae Width(1/2) : Neck Width/2 + 1.7cm Front Godae Width(l/2) : Back Godae Width(1/2) - 2cm $\circled6$Back Godae Point is 1.5cm higher than shoulder line, and Front Godae Point is 1.5cm lower than shoulder line. $\circled7$ Back Godae Depth: 1.2cm + 1.5cm = 2.7cm The Jeogori Pattern designed by the above method Is as (fig. 8) The results of the sensory test of the new pattern are as fellows. Except for 2 items, every mark of 24 test items has over 5.0 point and a total average mark is 5.25 point. Witch is a good mark. Therefore the new pattern is valid. Especially, the parts of Git, sleeves and back face have a high mark, so the appearances of those parts are excellent.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.2
• /
• pp.156-162
• /
• 2013

The characteristics of the unsteady flowfield of a square prism having a detached splitter plate at the wake side were investigated by advanced vortex method. The instantaneous and average velocity field and pressure field around a square prism without and having splitter plate were calculated by forcing the gap ratio having the maximum drag reduction rate, at Reynolds number $Re=1.0{\times}10^4$ and the width ratio H/B=1.0 of splitter to the prism width. The drag and lift coefficients on the square prism were also obtained. The calculated results agree with the measured drag coefficients and pressure distributions on the square prism. The vortices of the opposite direction at upside and down side of the splitter plate were generated by installing of the plate. And the drag on the square prism was decreased by increasing of the pressure of back face of the prism with the vortices.

• Proceedings of the SCSK Conference
• /
• 2003.09b
• /
• pp.253-267
• /
• 2003

Inositol and phytic acic extracted from rice bran were investigated for applying cosmetics. Skin lotions containing 0∼3.0wt% inositol and 0∼1.5wt% phytic acid were applied respectively, to the arm skins of 45 Asian women 20'-40's for 7 weeks. Improvement on moisture was evaluated. In addition, improvements on sebum, elasticity, and wrinkle were examined after applying placebo, Inositol and phytic acid-containing skin lotions for face, respectively. For 1.0 wt% inositol resulted in 19% increase of moisture. The wrinkle reduction and elasticity improved 12.4% and 17.0% on average, respectively. Applying 0.5wt% phytic acid resulted in 71.6% increase the moisture. Improvements on wrinkle and elasticity were 15.9% and 21.9% respectively. Applying inositol or phytic acid regardless of dry or oily, resulted in sebum value recovery to that of the normal skin after 2- 4 weeks. Inositol is inferior to phytic acid in improvenients of the skin, and phytic acid is not suitable to sensitive skin. So 0-0.5wt% of phytic acid were added to 1.0wt% inositol and similar experiments were carried out. In case of added 0.1wt% phytic acid, moisture increased 63.8% approximately. Improvements on elasticity and reduction on wrinkle were 17.2% and 17.4%, respectively. Both skin types were turned to normal skin type after 2 weeks. It could improve the skin condition when used inositol added phytic acid. The optimized concentration of phytic acid was 0.10wt% with 1.0wt% of inositol for synergic effect.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.11
• /
• pp.83-93
• /
• 2014

It is a widespread concern that electrical interconnection based network-on-chip (NoC) will ultimately face the limitation in communication bandwidth, transmission latency and power consumption in the near future. With the development of silicon photonics technology, a hybrid optical network-on-chip (HONoC) which embraces both electrical- and optical interconnect, is emerging as a promising solution to overcome these problems. Today's leading edge systems-on-chips (SoCs) comprise heterogeneous many-cores for higher energy efficiency, therefore, extended study beyond regular topology based NoC is required. This paper proposes an energy and latency optimization topology design technique for HONoC taking into account the traffic characteristics of target applications. The proposed technique is implemented with genetic algorithm and simulation results show the reduction by 13.84% in power loss and 28.14% in average latency, respectively.