• 농업과학연구
• /
• 제49권4호
• /
• pp.639-646
• /
• 2022

The present experiment was conducted to assess the effect of Buttiauxella-derived phytase in finishing pigs fed corn/soybean meal diets with an increase in the calcium (Ca)/total phosphorus (P) (Ca/tP) ratio and a reduction in net energy on the growth performance and nutrient digestibility on the finishing pigs. A total of 90 crossbred ([Yorkshire × Landrace] × Duroc) finishing pigs with an average initial body weight (BW) of 56.94 ± 2.43 kg were used for an 11-week feeding trial. The pigs were randomly allotted to one of three dietary treatments (six replication/treatment and five pigs/pen) in a randomized complete block design according to their BW and gender. Dietary treatments consisted of supplementation of phytase (0.05, 0.07, and 0.1% in the control, Trt1 and Trt 2 diets, respectively) maintaining the Ca/tP ratio (1.67 : 1, 1.84 : 1, and 2.19 : 1 in control, Trt1 and Trt 2 diets, respectively) and reducing the net energy by 1% in Trt1 and Trt2 diets compared with the control diet. The results showed that dietary supplementation with phytase in the energy-reduced diet had a similar (p > 0.05) effect on the BW, average daily gain, average daily feed intake, and gain/feed ratio of the finishing pigs. Also, there were no effects (p > 0.05) of treatment matrixes on the nutrient digestibility of dry matter, nitrogen calcium, phosphorus, and gross energy. In conclusion, the increase of phytase and Ca/tP ratio and the reduction of net energy in the corn/soybean meal diet resulted in comparable growth performance and nutrient digestibility of finishing pigs relative to pigs fed the control diet.

• 터널과지하공간
• /
• 제25권5호
• /
• pp.450-461
• /
• 2015

본 연구는 블록크기 및 균열의 기하학적 속성이 균열암반의 수리적 특성에 미치는 효과를 파악하기 위해 이차원 등가파이프 연결구조에 기반을 둔 DFN 유체유동 해석기법을 적용하여 수치실험을 수행하였다. 두 개의 균열군을 사용하여 균열의 기하학적 속성 변화를 반영할 수 있도록 방향, 면적빈도, 길이분포를 달리하며 이차원 영역에 추계론적으로 생성한 총 72개의 DFN 블록에 대하여 방향에 따른 블록수리전도도가 산정되었다. 또한, 각각의 DFN 블록에서 이론적 블록수리전도도, 주 수리전도도텐서 및 평균블록수리전도도를 추정하여 비교분석한 결과, 블록크기 및 균열의 기하학적 속성은 균열성 암반의 수리적 특성에 큰 영향을 미치는 것으로 평가되었다. 균열군의 교차각이 작을수록, 면적빈도가 낮고 길이분포가 짧을수록 DFN 시스템은 유체유동에 대한 REV를 정의하기 어려우며 방향에 따른 블록수리전도도의 변동성이 강하게 나타났다. 일반적으로 블록크기가 커질수록 DFN 시스템에 대한 등가연속체 취급 가능성은 높아진다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권9호
• /
• pp.1431-1441
• /
• 2018

Objective: This study was conducted to assess the effects of replacing rice straw with different proportions of cassava pulp on growth performance, feed intake, digestibility, rumen microbial population, energy partitioning and efficiency of metabolizable energy utilization in beef cattle. Methods: Eighteen yearling Thai native beef cattle (Bos indicus) with an average initial body weight (BW) of $98.3{\pm}12.8kg$ were allocated to one of three dietary treatments and fed ad libitum for 149 days in a randomized complete block design. Three dietary treatments using different proportions of cassava pulp (100, 300, and 500 g/kg dry matter basis) instead of rice straw as a base in a fermented total mixed ration were applied. Animals were placed in a metabolic pen equipped with a ventilated head box respiration system to determine total digestibility and energy balance. Results: The average daily weight gain, digestible intake and apparent digestibility of dry matter, organic matter and non-fiber carbohydrate, total protozoa, energy intake, energy retention and energy efficiency increased linearly (p<0.05) with an increasing proportion of cassava pulp in the diet, whereas the three main types of fibrolytic bacteria and energy excretion in the urine (p<0.05) decreased. The metabolizable energy requirement for the maintenance of yearling Thai native cattle, determined by a linear regression analysis, was $399kJ/kg\;BW^{0.75}$, with an efficiency of metabolizable energy utilization for growth of 0.86. Conclusion: Our results demonstrated that increasing the proportion of cassava pulp up to 500 g/kg of dry matter as a base in a fermented total mixed ration is an effective strategy for improving productivity in zebu cattle.

• Asian-Australasian Journal of Animal Sciences
• /
• 제26권3호
• /
• pp.349-357
• /
• 2013

The aim of this study was to evaluate the efficiency of supplements containing different energy sources in relation to mineral supplementation of steers grazing guineagrass (Panicum maximum cv Tanz$\hat{a}$nia) pasture, during the dry season. The experimental design was a randomized block with three treatments and four replications. The treatments consisted of a mineral supplementation and two other supplements, one based on corn seed and the other based on soybean hulls, and provided at 0.8% of body weight. Forty-eight, 12 month-old crossbred steers with an average initial body weight of 267 kg, were assigned to twelve paddocks (1,125 ha) of guineagrass. The animals that were fed with soybean hulls and corn seed presented a greater average daily gain (0.982 and 0.937) when compared with the mineral supplementation. Soybean hulls can be used as a satisfactory food source, replacing corn as an energy source in the supplementation of beef cattle without compromising animal performance.

• 한국수소및신에너지학회논문집
• /
• 제29권1호
• /
• pp.105-110
• /
• 2018

The flow boiling heat transfer of water was experimentally investigated on plain and sintered microporous surfaces in a mini-channel. The effects of microporous coating on flow boiling heat transfer of subcooled water were investigated in a 300 mm long mini-channel with a cross section of $20{\times}10mm^2$. The test section has sufficiently long entrance length of 300 mm which provides a fully-developed flow before the channel inlet. The bottom side of the channel was heated by a copper block assembled with a high-density cartridge heater and other sides of the channel were insulated. The microporous surface was fabricated by sintering copper particles with the average particle size of $50{\mu}m$ on the top side of the copper block. Heat transfer measurement was conducted at the mass flux of $208kg/m^2s$ and the heat flux up to $500kW/m^2$. Microporous coated surface showed an earlier boiling incipience compared with plain surface regardless of the mass flux. Microporous coating were significantly attributed to local wall temperature and local heat transfer coefficient for flow boiling.

• ETRI Journal
• /
• 제43권4호
• /
• pp.717-727
• /
• 2021

In this study, new multiplier and adder method designs with multiplexers are proposed. The designs are based on quaternary logic and a carbon nanotube field-effect transistor (CNTFET). The design utilizes 4 × 4 multiplier blocks. Applying specific rotational functions and unary operators to the quaternary logic reduced the power delay produced (PDP) circuit by 54% and 17.5% in the CNTFETs used in the adder block and by 98.4% and 43.62% in the transistors in the multiplier block, respectively. The proposed 4 × 4 multiplier also reduced the occupied area by 66.05% and increased the speed circuit by 55.59%. The proposed designs are simulated using HSPICE software and 32 nm technology in the Stanford Compact SPICE model for CNTFETs. The simulated results display a significant improvement in the fabrication, average power consumption, speed, and PDP compared to the current bestperforming techniques in the literature. The proposed operators and circuits are evaluated under various operating conditions, and the results demonstrate the stability of the proposed circuits.

• 자원환경지질
• /
• 제50권1호
• /
• pp.61-71
• /
• 2017

본 연구는 절리의 빈도 및 길이분포가 절리암반의 수리지질학적 특성에 미치는 영향을 평가하기 위하여 이차원 불연속절리망 (DFN; discrete fracture network) 유체유동 해석을 바탕으로 한 수치실험을 수행하였다. 두개의 절리군을 사용하여 절리의 빈도와 길이분포를 달리하며 추계론적으로 생성한 총 51개의 DFN 시스템에 대하여 $0^{\circ}$부터 매 $30^{\circ}$ 간격으로 총 12 방향으로 구현한 총 612개의 $20m{\times}20m$ DFN 블록에서 방향에 따른 블록수리전도도가 산정되었다. 또한, 각각의 DFN 시스템에서 이론적 블록수리전도도와 더불어 주 수리전도도텐서, 평균 블록수리전도도 등이 산정되었다. 절리군의 빈도의 증가 또는 길이의 평균 및 표준편차 증가에 따라 임의 방향으로의 블록수리전도도는 증가하며 DFN 시스템에 대한 등가연속체 취급 가능성이 높아지지만, 절리군 간의 빈도 차이가 커지면 블록수리전도도의 이방성 증대로 인하여 등가연속체 취급 가능성이 낮아질 수 있는 것으로 평가되었다. 두 절리군의 교차각이 작을수록 등가연속체 특성은 빈도 및 길이분포의 변화에 상대적으로 더욱 영향을 받는 것으로 평가되었다. 등가연속체로 취급하기 어려울 정도로 두 절리군의 교차각이 작아도 절리군의 빈도 또는 길이 분포가 증가하면 등가연속체 취급 가능성은 높아진다.

• 디지털산업정보학회논문지
• /
• 제4권1호
• /
• pp.9-16
• /
• 2008

This paper presents a frequency selection algorithm for minimization power consumption of processor in Mobile System. The proposed algorithm has processor designed low power processor using clock gating method. Clock gating method has improved the power dissipation by control main clock through the bus which is embedded clock block applying the method of clock gating. Proposed method has compared power consumption considered the dynamic power for processor, selected frequency has considered energy gain and energy consumption for designed processor. Or reduced power consumption with decreased processor speed using slack time. This technique has improved the life time of the mobile systems by clock gating method, considered energy and using slack time. As an results, the proposed algorithm reduce average power saving up to 4% comparing to not apply processor in mobile system.

• 자원환경지질
• /
• 제49권1호
• /
• pp.31-41
• /
• 2016

본 연구는 절리의 방향분포가 절리성 암반의 수리적 특성에 미치는 영향을 평가하기 위하여 등가파이프 연결구조에 기반을 둔 이차원 DFN(discrete fracture network) 유체유동 해석 프로그램 코드를 개발하고 수치실험을 수행하였다. 수치실험에 사용된 이차원 DFN 시스템은 경계효과를 고려하여 $32m{\times}32m$ 영역의 중앙에서 $20m{\times}20m$ 크기의 DFN 블록이다. 두 절리군을 사용하여 절리의 빈도와 길이분포를 고정하고 절리군 선주향의 평균과 표준편차를 달리하며 추계론적으로 생성한 총 15개의 DFN 블록에 대하여 매 $30^{\circ}$ 간격으로 회전하면서 총 12 방향으로 구현한 총 180개 DFN 블록에서 블록수리전도도가 산정되었다. 또한, 각각의 DFN 블록에서 이론적 블록수리전도도, 주 수리전도도텐서 및 평균블록수리전도도를 추정하여 비교분석한 결과, 절리군의 평균 교차각이 작을수록 절리 방향분포의 변동성이 이차원 DFN 시스템의 등가연속체 취급 가능성 및 블록수리전도 특성에 더욱 영향을 미치는 것으로 평가되었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권6호
• /
• pp.818-822
• /
• 2003

In order to investigate the effect of different sources of energy on intake and nutrient utilization from urea molasses mineral block (UMMB), rumen fermentation pattern and blood biochemical constituents, 18 intact and 9 rumen fistulated male Murrah buffaloes aged about 3 years and average weight 310.8 kg were randomly allocated into three groups of 9 animals in each, thus each group having 6 intact and three rumen fistulated buffaloes. All animals were fed individually for 90 days. All buffaloes were offered wheat straw as basal roughage and urea molasses mineral block for free choice of licking. Three different energy sources viz., barley grain, (group I), maize grain (group II) and jowar green (group III) were offered to meet their nutrient requirement as per Kearl (1982). At the end of feeding trial, a metabolism trial of 7 days duration was carried out on intact animals to determine the digestibility of nutrients. Rumen fermentation studies were carried out on rumen fistulated animals. After the metabolism trial blood was collected from intact animals to estimate the nitrogen constituents in blood serum of animals fed on different sources of energy. Results revealed no significant difference in the intake of UMMB in three groups. Similarly, the intake of DM (kg), DCP (g) and TDN (kg) per day was similar in three groups statistically. The apparent digestibility of dry matter (DM), organic matter (OM), ether extract (EE) and nitrogen free extract (NFE) was significantly (p<0.05) more in group II than group III, whereas the digestibility of DM, OM and NFE was similar in group I and II. The digestibility of crude fiber (CF) and all the fiber fractions i.e. NDF, ADF, cellulose and hemicellulose was alike in 3 groups. Nitrogen balance (g/d) was significantly (p<0.05) more in group III as compared to group I and II, which were alike statistically, though the N intake (g/d) was similar in 3 groups but N balance (g/d) was significantly (p<0.05) less in group III as compared to other 2 groups. Significantly (p<0.05) higher concentration of total volatile fatty acids (TVFA), total nitrogen (TN) and its fractions were observed in group I and II as compared to group III. There was no effect on rumen pH, rumen volume and digesta flow rate due to different sources of energy in 3 groups. Similarly the blood serum biochemical parameters (NH3-N, urea-N and total protein) were statistically identical in 3 groups.