• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.7 no.2
• /
• pp.181-195
• /
• 1997

The purpose of this study was to investigate factors affecting the composition and concentrations of fumes generated from various types of welding processes. The results are as follows. 1. Iron(Fe), zinc(Zn) and manganese(Mn) were predominant in Welding fumes. The Fe content in total fumes was 25.5% in coated electrode and 28.2% in $CO_2$ are welding, and the Zn content was 4.5% and 9.1%, respectively, and the Mn was 3.6% and 7.8%, respectively. 2. It was found that the important factors determining composition and concentration of fumes were type of industries, type of welding processes, type and composition of electrodes, composition of base metals, confinement of workplaces or condition of ventilation, work intensity, coated metals such as lead and Zn in paint. 3. The Mn content in airborne fumes was highly correlated with that of electrode(r=0.77, p<0.01) and was about 4 times higher than that in electrodes or base metals. The results lindicate that Mn is well evaporated into air during welding. The higher vapor pressure of Mn may explain this phenomenon. 4. the airborne total fume concentrations were significantly different among types of industries(p<0.001). The airborne total fume concentration was higher in order of sleel-structure manufacturing($GM=15.1mg/m^3$), shipbuilding($GM=13.2mg/m^3$), automobile-component manufacturing ($GM=7.8mg/m^3$) and automobile assembling industry($GM=3.0mg/m^3$) 5. The airbone total fume concentration was 6 times higher in $CO_2$ welding than in coated electrode welding, and approximately 3 times higher in confined area than in open area, in steel-structure manufacturing industry. 6. The concentration of welding fume outside welding helmet was about 2 times higher than that inside it. It is recommened that air sampling be done inside helmet to evaulate worker's exposure accurately, for it has an outstanding effect on reducing worker exposure to fumes and other contaminants.

• Science of Emotion and Sensibility
• /
• v.21 no.1
• /
• pp.17-34
• /
• 2018

The era of fully autonomous vehicles which can travel to their destination completely, is expected to arrive in the near future. The automobile industry will face a huge change in the near future. It makes the industry in the midst of a major turning point, since the automobile was born in the late 1800s. It is expected that the fully autonomous vehicle will be defined as a part of a living space beyond the concept of transportation. However, the existing research on the interior design of the fully autonomous vehicle is insufficient. The purpose of this study is to propose a design method of interior space through analyzing in-vehicle activities, which is a fundamental design element that can satisfy user's emotional experience suitable the concept of living space. For this purpose, the consumer's consciousness about the in-vehicle activity of fully autonomous vehicle was investigated. As a result, domestic consumers perceived the needs of in-vehicle activities related to resting, listening and watching activities such as 'sleeping and resting', 'watching TV and movie', 'listening to music' among 'self - centered' activities. Based on the results of the investigation, this study will suggest a design method of interior design of the fully autonomous vehicle. This study is meaningful, because it is a leading research that suggests new ways of designing interior space by analyzing consumer's needs in a quantitative method.

• Research in Community and Public Health Nursing
• /
• v.6 no.2
• /
• pp.319-334
• /
• 1995

To investigate the risk factors of low back pain, an epidemiological study was carried out among male workers aged 20-55 employed in an automobile industry in Korea during the time period from February 1993 to October 1995. Workers participated to this study were divided into low back pain group(LBP) and control group, according to the self-reports by written questionnaires. General characteristics, medical history, work related factors, fatigue, and MMPI were compared between two groups. To clarify the relationship between job related low back pain and radiologic features of lumbar spine, radiographic study was carried out. The resultant data were processed for $x^2-test$, t-test, and stepwise logistic regression to confirm the adjusted odds ratios. The results were as follows: 1. History of back disease, lifting and carrying work, excessive physical fatigue, and weakend back strength of individual workers were directly associated with low back pain. Odd ratios of these 4 risk factors of low back pain were 5.07, 3.34, 1.49, and 1.22 respectively. 2. The frequency of low back pain history was significantly higher in LBP group. 3. Back muscle strength of lumbar spine of LBP group were significantly lower than control group. 4. The workers in LBP group revealed high fatigue symptoms. 5. In MMPI test LBP group showed higher scales in hypochondriasis, depression, hysteria, psychopathic deviate, paranoia, psychasthenia, schizophrenia, and hypomania. 6. LBP group were more frequently involved in lifting and carrying, working in awkward position, bending, twisting and using lower extremities. 7. LBP group were exposed more to vibration during working. 8. In the Analysis of radiographs of lumbar spine, Jacob's line not crossing fourth lumhar disc space, transitional vertebrae and lumbar displacement more than 4.4mm in standing lateral view were more frequently observed in LBP group than control group. Through these results, it is concluded that identification of previous history of back problem, change of work or working environment for workers with previous back problem and measures to relieve both physical and psychological fatigue of the workers are required for optimal management of work-related back problems among workers. In the present study, several results were different from the previous reports: Jacob's line not corssing fourth lumbar disc space, lumbarization, and vertebral slipping (spondylolisthesis) more than 4.4mm are related to backache. Meticulous studies are required to elucidate the difference.

• Korean Journal of Labor Studies
• /
• v.24 no.1
• /
• pp.65-105
• /
• 2018

This study examines the employment relations of TNC subsidiaries in Central and Eastern Europe(CEE). Specifically, this study analyzes the employment relations of Volkswagen subsidiaries, which has led the restructuring the CEE's automobile industry since the collapse of socialist regimes, and Hyundai subsidiaries, which has sought to cast employment relations through Greenfield Investment as a latecomer. After the collapse of socialism, with the massive inflow of foreign direct investment and the social legacy of weak labor unions, CEE has been included in the global production network as low-wage production base. Both VW and Hyundai have entered the CEE with their own characteristics and global strategies that have been developed in their home countries and have developed the local production. In the process, both have formed local employment relations, combining low-wage, unstable employment, and weak labor unions of CEE under their own strategy. In recent years, however, it has been doubtful of the sustainability of employment relations based on the advantages of low-wage production bases, as the pools of low-wage workforce decline and new union movements occur in CEE. These changes in CEE are an indication of the inherent contradiction of low-wage production base strategies.

• Journal of the Korean Society of Safety
• /
• v.37 no.2
• /
• pp.28-34
• /
• 2022

This study analyzes the impact that accidents and near misses have on clients' and contractors' awareness of safety culture. Due to the unique characteristic of employment structure in Korea, the occurrence of accidents differs by company size, which has relevant implications for the establishment of safety culture. Attention has been drawn to the importance of the management of accidents and near misses, with safety awareness acting as a core factor. A positive effect on the prevention of accidents could be achieved by noting the difference in safety awareness between clients and contractors and suggesting an associated suitable safety management system. In support of this study, a survey was distributed to workers in the automobile manufacturing industry (May-August 2020), and data from a total of 574 workers was collected and analyzed, including 399 clients' worksers and 175 contractors' workers. The questionnaire addressed participants' experiences of accidents and near misses as well as 50 items from the Nordic Occupational Safety Climate Questionnaire. Analysis of the responses was conducted using the methods of frequency analysis, Fisher's exact test, t-test, correlation analysis, and regression analysis. The results demonstrated that clients had more experiences with accidents and near misses compared to contractors. Additional differences between clients and contractors were noted in terms of the safety culture factors of learning, communication, and trust. A correlation was observed between the experience of accidents and safety justice management: for clients and contractors who experienced accidents, safety justice management was 9.4 times higher. Furthermore, clients' and contractors' awareness of employees' commitment to safety was determined to be 28.5 times higher in those who had experienced near misses This study concludes that, in order to improve accident prevention through the management of accidents and near misses, clients must focus on overseeing safety justice management and aspects of safety culture factors, while contractors must focus efforts on managing employees' commitment to safety. In further applications, this study could provide baseline data for health and safety activities in terms of the safety culture of clients and contractors. Further study on the establishment of safety culture as related to employment structure is proposed for future research.

• Journal of the Society of Disaster Information
• /
• v.19 no.3
• /
• pp.451-470
• /
• 2023

Purpose: Since COVID-19 was first discovered in China in December 2019, it has rapidly spread around the world, causing serious economic and social problems not only in individuals' lives, but also in businesses and countries. Individuals, businesses, and governments have all made various efforts to prevent the spread of COVID-19. Although the roles of individuals, companies, and the government are important to respond to and manage infectious diseases, previous studies have only partially studied the roles. Therefore, in this study, the roles of individuals, companies, and the government to achieve results in responding to infectious diseases disaster management A comprehensive study was conducted on this issue, and it was attempted to understand the impact of workers' perceptions of infectious disease disaster management and government and corporate capabil]ities on disaster response performance. Method: The survey was conducted for workers in the automobile manufacturing industry in Ulsan, Gyeongju, and Yangsan, and frequency analysis, factor analysis, correlation analysis, and regression analysis were performed. Result: It was found that worker perception had a positive effect on both government and corporate capabilities as well as disaster management performance. In addition, government capacity and corporate capacity had a positive effect on disaster management performance. Conclusion: The results of this study are meaningful in that they reveal that not only workers' perceptions but also the capabilities of the government and companies are important to achieve disaster response performance. In addition, workers should make good use of opportunities for education and participation provided by the government and corporations, and make the most social efforts that workers can make.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.3
• /
• pp.746-756
• /
• 2017

Marine accidents of fishing vessels occupied about 70.5% of the whole marine accidents in Korea from 1996 to 2015, this ratio was not much changed for a long time. A lot of efforts have been taken recently but marine accidents do not reduce. Therefore a fundamental counterplan to decrease accidents in fishing vessel is indispensable for reduction of whole marine accidents in Korea. Since the most frequent occurring accidents in fishing vessels were engine trouble and collision in statistics by KMST (1996~2015), the study focused on them. The cause of engine trouble were poor inspection and maintenance of the mechanical system. The greatest portion of marine accidents was collision, and the biggest cause of the collision was poor watch-keeping. The better watch-keeping will be the best way to reduce the accident. For this reason, it may be necessary for the navigator to make strict precaution on the other vessels under way systematically and keep the regulation for preventing collisions, and for an engineer on watch to make a check the mechanical system periodically for reduction the engine trouble. Instead of penalty, incentive about safe navigation will be helpful for reduce accident as if automobile insurance would do. In order to prevent engine trouble, the fisheries federation establish the repair center. Futhermore the development of autonomous navigation system is necessary to reduce the marine accident.

• Corrosion Science and Technology
• /
• v.13 no.5
• /
• pp.195-203
• /
• 2014

Modern industry has a wide variety of application areas such as ocean industry, construction and automobile industry. With the current circumstances, the need for anti-corrosion technology that can be used on materials to withstand in harsh environments, is increasing. In this study, we have sought to develop a metal coating technology with zinc and aluminum powders as a potential anti-corrosion material. To make a coating on metal products, a thermal diffusion coating method was used under the conditions of $350^{\circ}C$ for 30 minutes. Optical microscope, Field emission scanning electron microscope (FE-SEM&EDX) and X-ray diffraction analysis were used to analyze a coating layer. As a result, we have confirmed that the generated amount of rust on metal parts coated with thermal diffusion coating method decreased dramatically compared with non-coated metal parts. Furthermore, the anti-corrosion performance was evaluated according to the different ratio of zinc and aluminum. Finally, we confirmed the possibility of application and commercialization of our coating technique on metal parts used in harsh industrial based on the results of these performance.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.1
• /
• pp.5-12
• /
• 2015

According to the analysis of special medical examination and work environment monitoring data, the rate of C1 and D1 on noise hazard exceeded 90 % among those of total hazardous factors. The rate of company exceeding noise exposure limit was also more than 90 %. The analysis result shows that main ages diagnosed with C1 and D1 was age of 50s. The majority scale company having workers diagnosed with C1 and D1 was the companies employing 5~49 workers. Types of industries which have a large number of companies exceeding noise exposure limit were automobile and trailer manufacturing, metal processing industry and primary metal manufacturing. A large number of work processes exceeding noise exposure limit were forming and processing work, cutting and bending work and grinding. To reduce the number of company exceeding noise exposure limit, the reduction counterplan should be focused on the type of industry and the work process which exceeded noise exposure limit frequently. However, the reduction counterplan is preemptively necessary to the type of industry and the work process which exceeded noise exposure limit consecutively if the purpose of reduction counterplan is not to merely reduce the number of company exceeding noise exposure limit but to abate workers' suffering from noise.

• Elastomers and Composites
• /
• v.48 no.2
• /
• pp.125-132
• /
• 2013

In this work, we have discussed new engineering systems for preparing carbon master batch composed by carbon black and various organic compounds. In general, polymer resin, which applied for automobile tire, household items, and various industry items, is used with the fillers including carbon black and silica to control the color or properties. Domestic part and material industry has been remarkably developed in that the development of materials including the compounding of raw materials. Meanwhile, the engineering technique for mass production has not reached to a requirement of industry due to slow technique development and high dependence on foreign. Thus, we will focus on the introduction of new engineering technique developed by domestic company for preparing carbon master batch.