• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.4
• /
• pp.26-31
• /
• 2005

ITR(Inne. Tie Rod) is one of the core parts in an automobile steering system. The front wheels are connected to the steering system, which are controlled by steering wheel through the ITR. Improvement of assembling ITR is needed f3r drivers' satisfaction. Therefore, the parameters influencing the rotational torque were studied and analyzed. The useful results can be obtained, and could be applied to manufacture ITR. Through these manufacturing technologies, high quality ITR have been manufactured with high productivity.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.3
• /
• pp.157-167
• /
• 2011

Although vehicles become more intelligent for convenience and safety of drivers, traffic accidents are increased more and more. Especially, car-to-car single rear impacts in the urban area are increased rapidly because of driver inattention. To prevent rear impacts in the urban area, commercial automobile vendor applies the low-speed short-distance collision warning system. This paper presents low-speed short-distance collision warning algorithm for the city driving by using sensor fusion of laser sensor and ultrasonic sensor. An experiment using embedded microprocessor in the driving track was used to demonstrate the feasibility of the collision warning algorithm.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.63-72
• /
• 2014

With the rapid development in the economy and other fields as well, the standard of living in South Korea has been improved, and consequently, the demand of automobiles has quickly increased. It leads to various traffic issues such as traffic congestion, traffic accident, and parking problem. In particular, this illegal parking caused by the increase in the number of automobiles has been considered one of the main reasons to bring about traffic congestion as intensifying any dispute between neighbors in relation to a parking space, which has been also coming to the fore as a social issue. Therefore, this study looked into Daejeon Metropolitan City, the city that is understood to have the highest automobile sharing rate in South Korea but with relatively few cases of illegal parking crackdowns. In order to investigate the theoretical problems of the illegal parking, this study conducted a decision-making tree model-based Exhaustive CHAID analysis to figure out not only what makes drivers park illegally when they try to park vehicles but also those factors that would tempt the drivers into the illegal parking. The study, then, comes up with solutions to the problem. According to the analysis, in terms of the influential factors that encourage the drivers to park at some illegal areas, it was learned that these factors, the distance, a driver's experience of getting caught, the occupation and the use time in order, have an effect on the drivers' deciding to park illegally. After working on the prediction model, four nodes were finally extracted. Given the analysis result, as a solution to the illegal parking, it is necessary to establish public parking lots additionally and first secure the parking space for the vehicles used for living and working, and to activate the campaign for enhancing illegal parking crackdown and encouraging civic consciousness.

• 한국노년학
• /
• v.38 no.1
• /
• pp.225-241
• /
• 2018

Self-driving is meaningful activity for older persons because it enlarges the range of activity and provides opportunities for social participation. Driving is a complex activity that requires integration of physical, cognitive and sensory functions and is influenced by human and psychological factors. Age related functional deterioration affects the driving ability of older drivers. The purpose of this study is to investigate the factors affecting the risk of accidents and driving cessation of elderly drivers through systematic literature review. MEDLINE, EMBASE, Cochrane Library, KoreaMed, Pubmed were used for searching articles published from 2007 to 2017. 'aged', 'aging', 'automobile driving', 'age factors' were used as search terms and 18 articles were finally selected for analysis among 1,458 articles. In result of the study, the most significant effect showed in the physical domain, the driving habit and the performance function. The most frequent used tools evaluated driving habit and the cognitive function. In demographic characteristics, there was a correlation with the driving discontinue according to sex and age. This study emphasizes the necessity of preparing measures for safety driving with elderly. In addition, it suggests the necessity of systematically services such as individual education programs based on various driving cessation related factors of the elderly.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1429-1434
• /
• 2014

Recently, SUA(Sudden Unintended Acceleration) are increasingly occurred. However, all the responsibilities of SUA are accepted by an innocent driver despite of painful results due to mystery of accurate cause. If a driver raises this kind of trouble to the corresponding manufacturer, the automaker collects EDR installed in that vehicle and provides the result of their analysis as it turns out most of the analysis results were diagnosed "there is nothing wrong with the car". In this trend, the technology to protect drivers' position from SUA should be developed. In this study, the researchers aimed to develop a black box system that collects additional data from throttle valve which is considered as one of major causes of SUA accidents, in order to explain cause of SUA and defend innocent drivers.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.4
• /
• pp.47-57
• /
• 2018

Purpose and Methods: Currently, Korea has the lowest fertility rate among OECD countries. It is also true that from the aspect of encouraging childbirth policy, as the use of automobiles has increased, the interest in securing parking spaces has also become more important. However, there are efforts and researches on the supplying parking spaces for the general public in society not to the positive discrimination such as elders or pregnant women. On the other hand, there is a growing need for a dedicated parking space for pregnant women due to the changing social environment and increasing number of female drivers. At this point, proper design of the maternity parking spaces is essential. Therefore, this study is analyzing the characteristics of pregnant women such as measurements and certain actions and case studies of domestic and oversea. Through the analysis of these factors, the following results were derived. Results: First, it was determined that the important factor in the planning of the parking-block for pregnant women was the human body size of pregnant women. And the required dimensions of movement of pregnant women were derived. Second, the dimensions of automobile were analyzed and applied from the most used vehicles in the family composition. Third, after the observations, the status of the parking spaces of the pregnant women and observations showed that the drivers not only the pregnant women but others were using the spaces improperly. Fourth, at certain conditions of the parking spaces, in order to improve the efficiency of the parking spaces, it is necessarily considered that the usage of designated accessible parking spaces can be used together by not only the disabled but also to the passengers who are classified as 'transportation weak' such as pregnant women. Implications: In this study, the researcher will propose the shape and size of the parking-block for pregnant women considering the elements derived above.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.221-223
• /
• 2016

Currently in the automobile market, models with many convenient functions combined with IT have been released. This change has a strength that there could be many convenient and useful functions related to driving while flaws of vehicles caused by malfunctions of these electronic equipments could trigger serious incidents. Among them, the sudden unintended acceleration considered as the most serious is a serious flaw that could threaten driver's life. However, the causes for sudden acceleration incidents have not been clearly investigated with no coping measures. As manufacturers shift the responsibility to drivers' carelessness, drivers' burden is continuously increasing. Thus, this paper designed the system to cope with sudden acceleration incidents by changing conditions of controlling parts like accelerator and brake, and internal image of the driver's seat into data through the integrated module.

• Journal of Sensor Science and Technology
• /
• v.26 no.1
• /
• pp.39-43
• /
• 2017

Development of vision system as a nondestructive evaluation system can be very useful in screening the defective mechanical parts before they are assembled into the final product. Since the tens of thousands of the mechanical parts are used in an automobile carefully inspecting the quality of the mechanical parts is very important to maximize the performance of the automobile. To sort out the defective mechanical parts before they are assembled, auto parts fabrication companies employ various inspection systems. Nondestructive evaluation systems are getting rapidly popular among various inspection systems. In this study, we have developed a vision system to inspect the inside of the brake caliper, a part that is used to compose a brake which is the most important to the safety of the drivers and the passengers. In a brake caliper, a piston is pushed against the brake disk by oil pressure, causing a friction to damp the rotation of the wheel. Inside the caliper, a groove is positioned to adopt an oil seal to prevent the oil leaks. Inspecting the groove with our vision system, we could examine the existence of the contaminants which are normally the residual tiny pieces from the machining process. We used a high resolution GigE camera, 360 degree lens to look in the inside view of the caliper at once, and a special illumination system in this vision system. We used the edge detection technique to successfully detect the contaminants which were in the form of small metal chips. Labview graphical program was used to process the digital data from the camera and to display the vision and the statistics of the contaminants. We were very successful in detecting the contaminants from the various size calipers. We think we are ready to employ this vision system to the caliper production factories.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.53-58
• /
• 2006

The purpose of this study was to test the safety of the heel rest which was made for reducing the automobile driver's muscle fatigue with automatic transmission. Sixty subjects participated in the test, including ten males and ten females in 30s, 40s, 50s, respectively. Simulator consisted of automobile cockpit, accelerator and brake pedal sensor, heel rest. and driving displays. 30 seconds were given to subjects to be accustomed to the simulator environment. They also had one pre-trial to use the brake pedal according to the experimental scenario. They were told to step on the brake pedal immediately as soon as the red light was on the display The reaction time representing the foot travel time between accelerator and brake pedal was measured with/without the heel rest. In results, there was no significant difference in reaction time between conditions with/without heel rest. The result indicated that the heel rest used in this study would be a safe accessory for drivers who need to reduce the fatigue of the muscle or joint during driving.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.825-831
• /
• 2020

In modern society, automobiles have become an essential means of transportation. It is the only consumable that is worn by contacting the ground among automobile parts. If the tyres are severely worn, the tyres may be break, presenting a risk of a serious accident to the driver. To avoid this risk, drivers should check tyre pressure and tread condition before driving a car. Tyre inflation pressure can be easily measured by TPMS, but in the case of tyre tread conditions, it can be cumbersome when the driver measures it directly using a coin or vernier caliper. This hassle can expose the driver to traffic accidents due to tyre breakage by neglecting to measure the condition of the tyre tread. In this paper, we introduce the contents of research to design an IoT service-based system that can automatically measure automobile tyres, and we verified the possibility of realizing the system by actually implementing and testing some components of the system.