• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.2
• /
• pp.117-132
• /
• 2018

There always exist nonzero inspection errors whether inspectors are humans or automatic inspection machines. Inspection errors can be categorized by two types, type I error and type II error, and they can be regarded as either a constant or a random variable. Under the assumption that two types of random inspection errors are distributed with the "uniform" distribution on a half-open interval starting from zero, it was proved that inspectors overestimate any given fraction defective with the probability more than 50%, if and only if the given fraction defective is smaller than a critical value, which depends upon only the ratio of a type II error over a type I error. In addition, it was also proved that the probability of overestimation approaches one hundred percent as a given fraction defective approaches zero. If these critical phenomena hold true for any error distribution, then it might have great economic impact on commercial inspection plans due to the unfair overestimation and the recent trend of decreasing fraction defectives in industry. In this paper, we deal with the same overestimation problem, but assume a "symmetrical triangular" distribution expecting better results since our triangular distribution is closer to a normal distribution than the uniform distribution. It turns out that the overestimation phenomenon still holds true even for the triangular error distribution.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.126-130
• /
• 2021

The ball grid array is one of the packaging methods that used in high density printed circuit board. Solder void defects caused by voids in the solder ball during the BGA process do not directly affect the reliability of the product, but it may accelerate the aging of the device on the PCB layer or interface surface depending on its size or location. Void inspection is important because it is related in yields with products. The most important process in the optical inspection of solder void is the segmentation process of solder and void. However, there are several segmentation algorithms for the vision inspection, it is impossible to inspect all of images ideally. When X-Ray images with poor contrast and high level of noise become difficult to perform image processing for vision inspection in terms of software programming. This paper suggests the solution to deal with the suggested problem by means of using Mask R-CNN instead of digital image processing algorithm. Mask R-CNN model can be trained with images pre-processed to increase contrast or alleviate noises. With this process, it provides more efficient system about complex object segmentation than conventional system.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.2
• /
• pp.125-137
• /
• 2000

In this paper we propose a new approach to the development of the automatic vision system to examine and repair the steam generator tubes at remote distance. In nuclear power plants workers are reluctant of works in steam generator because of the high radiation environment and limited working space. It is strongly recommended that the examination and maintenance works be done by an automatic system for the protection of the operator from the radiation exposure. Digital signal processors are used in implementing real time recognition and examination of steam generator tubes in the proposed vision system. Performance of proposed digital vision system is illustrated by simulation and experiment for similar steam generator moldel.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.126-131
• /
• 2004

On-machine automatic measuring software from 3-D solid modeler is generally applied to assess the functional performance of a final produce for computer numerical control (CNC) machine. Automatic measuring software may also be performed on individual components of CNC machine in which some functional aspect of the component must be examined and cannot be implicity determined by means of a mechanical inspection. The manufacturing specialist, combined with the appropriate software simulation, can not only create the commands to drive the virtual measuring but also can check for mistakes by viewing the computer graphics simulation of the tool cutting sequence.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.2
• /
• pp.57-62
• /
• 1996

Basically, the idea underlying most edge-detection technique is the computation of a local derivative operator used for edge detection in gray level image. This concept can be easily illustrated with the aid of object which shows an image of a simple lilght on a dark background, Using the gray level profile along a horizontal scan line of the image. the first and second derivatives of it were acquired. This study is to develop an automatic measuring system based on the digital image processing which can be applied to the real time measurement of the characteristics of the ultra-thin thickness. The experimental results indicate that the developed automatic inspection can be applied in real situation.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.505-508
• /
• 1995

The automatic interpretation of awake background electroencephalogram (EEG), consisting of quantitative EEG interpretation and EEG report making, has been developed by the authors based on EEG data visually inspected by an electroencephalographer (EEGer). The present study was focused on the adaptability of the automatic EEG interpretation which was accomplished by the constructive neural network with forgetting factor. The artificial neural network (ANN) was constructed so as to give the integrative decision of the EEG by using the input signals of the intermediate judgment of 13 items of the EEG. The feature of the ANN was that it adapted to any EEGer who gave visual inspection for the training data. The developed method was evaluated based on the EEG data of 57 patients. The re-trained ANN adapted to another EEGer appropriately.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.5
• /
• pp.658-665
• /
• 1998

In this paper, we propose a new approach to the development of the automatic vision system to examine and repair the steam generator tubes at remote distance. In nuclear power plants, workers are reluctant of works in steam generator because of the high radiation environment and limited working space. It is strongly recommended that the examination and maintenance works be done by an automatic system for the protection of the operator from the radiation exposure. Digital signal processors are used in implementing real time recognition and examination of steam generator tubes in the proposed vision system. Performance of the proposed digital vision system is illustrated by simulation and experiment for similar steam generator model.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.542-547
• /
• 2000

In this paper, we propose a new approach to the development of the automatic vision system to examine and repair the steam generator tubes at remote distance. In nuclear power plants, workers are reluctant of works in steam generator because of the high radiation environment and limited working space. It is strongly recommended that the examination and maintenance works be done by an automatic system for the protection of the operator from the radiation exposure. Digital signal processors are used in implementing real time recognition and examination of steam generator tubes in the proposed vision system. Performance of proposed digital vision system is illustrated by simulation and experiment for similar steam generator model.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.10a
• /
• pp.571-578
• /
• 1999

In this paper, we propose a new approach to the development of the automatic vision system to examine and repair the steam generator tubes at remote distance. In nuclear power plants, workers are reluctant of works in steam generator because of the high radiation environment and limited working space. It is strongly recommended that the examination and maintenance works be done by an automatic system for the protection of the operator from the radiation exposure. Digital signal processors are used in implementing real time recognition and examination of steam generator tubes in the proposed vision system. Performance of proposed digital vision system is illustrated by simulation and experiment for similar steam generator model.

• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.330-335
• /
• 2017

We have heard about several keywords of the fourth industrial revolution such as automation, artificial intelligence and connectivity. And electronic publishing systems and ebooks will enable us to experience a new industrial revolution without discrimination. On that level, it is necessary to study a method of automatic accessibility tool for electronic publishing. There are some studies on accessibility standard specifications, accessibility guidelines, and accessibility certificate criteria. but there is little research about automatic inspection tools in electronic publishing area. This paper proposed a library for accessibility inspector of EPUB and its components based on IDPF EPUB accessiblity guidelines and TTA accessibility certificate criteria for reading disabled people. After implementing the library that can be connected to SIGIL, which is the most widely used in Korea, we verified its functionality and its coverage with Korean commercial EPUB files.