• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.351-373
• /
• 2011

Certificates of Origin(C/O) are necessary to gain benefits from preferential tariff treatment under the Free Trade Agreement(FTA). The C/O can be issued by issuing authorities or by exporters themselves. Recently, due to signed FTA such as Korean-EU FTA, issuance of self-declared C/O by exporters is increasing. In order to be qualified to issue self -declared C/O, exporters are required to acquire Approved Exporter status. An Approved Exporter is only required to present an invoice to substitute the certificate. The invoice contains an Approved Exporter number and a declaration that states the goods comply with the origin requirements. Either certification or notarization is not necessary. In result, the exporters are responsible for application of a preferential tariff under the self-declared C/O which issued incorrectly, even if it is not intentional. Therefore, in this paper, we studied authorization for Approved Exporter status and the practical use of its status. If companies obtain more Approved Exporter status, the effects of FTA would be maximized due to application of a preferential tariff under the C/O.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.4
• /
• pp.163-169
• /
• 2019

Sn-Pb solder alloys in electronics rapidly has been replaced to Pb free solder alloys because of various environmental regulations such as restriction of hazardous substances directive (RoHS), European Union waste electrical, waste electrical and electronic equipment (WEEE), registration evaluation authorization and of chemicals (REACH) etc. Because Sn58%Bi (in wt.%) solder alloy has low melting point and higher mechanical properties than that of Sn-Pb solder, it has been studied to manufacture electronic components. However, the reliability of Sn58%Bi solder could be lowered because of the brittleness of Bi element included in the solder alloy. Therefore, we observed the microstructures of Sn58%Bi composite solders with various contents of Sn-decorated multiwalled carbon nanotube (Sn-MWCNT) particles and evaluated bonding strength of the FR-4 components assembled with Sn58%Bi composite solder. Also, microstructures and bonding strengths of the Sn58%Bi composite solder joints were evaluated with the number of reflows from 1 to 7 times, respectively. Bonding strengths and fracture energies of the Sn58%Bi composite solder joints were measured by die shear test. Microstructures and fracture modes were observed with scanning electron microscope (SEM). Microstructures in the Sn58%Bi composite solder joints were finer than that of only Sn58%Bi solder joint. Bonding strength and fracture energy of Sn58%Bi composite solder including 0.1 wt.% of Sn-decorated MWCNT particles increased up to 20.4% and 15.4% at 5 times in reflow, respectively.

• Journal of Biomedical Engineering Research
• /
• v.32 no.2
• /
• pp.177-184
• /
• 2011

In this study, the system for application of the bone stimulation was implemented using high frequency and low strain method. The whole system consists of the high frequency and low strain vibration stimulation system 177 for stimulating bone, LVDT sensor, and wireless sensor based on tri-axial accelerometer. To evaluate the usefulness of the system, the frequencies and accelerations from function generator were applied to the vibration stimulation system. The range of frequency was 17 Hz, 30 Hz, 45 Hz, 50 Hz and the range of acceleration was set 0.3 g, 0.6 g, 1g, and 2 g. The measured frequencies and acceleration using LVDT (linear variable difference transformer) sensor and 3-axial accelerometer were estimated and compared. The range of frequencies average difference was from 0.0 to 0.004 Hz. As the standard deviation of frequencies estimated by LVDT sensor and accelerometer was below 0.03 Hz and the output frequencies of function generator were similar: Also the results of t-test were satisfied with conditions of p > 0.05. And the acquired frequencies and acceleration from vibration measuring device module were estimated and analyzed. As the mean of accelerations was similar to the acceleration applied from function generator. And the standard deviation of acceleration estimated from vibration measuring device module was ranged from 0.019 g to 0.038 g. Also the results of t-test were satisfied with conditions of p > 0.05. Therefore, these results were airy similar to the acceleration applied from function generator. As a result, the usefulness of the system was confirmed. n a further study, clinical experiment will be carried out with the authorization of IRB (institutional review board) so that appropriate frequency and strain would be investigated in clinical field.

• Journal of KIISE:Databases
• /
• v.31 no.6
• /
• pp.567-584
• /
• 2004

As XML becomes popular as the way of presenting information on the web, how to secure XML data becomes an important issue. So far study on XML security has focused on security of data communications by using digital sign or encryption technology. But, it now requires not just to communicate secure XML data on communication but also to manage query process to access XML data since XML data becomes more complicated and bigger. We can manage XML data queries by access control technique. Right now current XML data access control only deals with read operation. This approach has no option to process update XML queries. In this paper, we present XML access control model and technique that can support both read and update operations. In this paper, we will propose the operation for XML document update. Also, We will define action type as a new concept to manage authorization information and process update queries. It results in both minimizing access control steps and reducing memory cost. In addition, we can filter queries that have no access rights at the XML data, which it can reduce unnecessary tasks for processing unauthorized query. As a result of the performance evaluation, we show our access control model is proved to be better than other access control model in update query. But it has a little overhead to decide action type in select query.

• Journal of Korean Classical Literature and Education
• /
• no.32
• /
• pp.261-285
• /
• 2016

Saseol-sijo, a form of sijo with longer verses, still affords pleasure to modern readers, even when it is read without the original performance context. In this study, I focused on Saseol-sijo that induces laughter through exaggeration and caricature while singing about eagerly waiting for a lover who has left. These texts describe concurrently the emotions that are contradictory to each other, such as nostalgia and laughter. In addition, this feature reflects human's inner emotions that are not unified but rather change dynamically. Craving creates a sense of nostalgia, and also produces a comical element in nostalgia, so that nostalgia and laughter can be co-exist without conflict. In this study, 'semiotic square' was applied as the framework for interpreting the Saseol-sijo, which demonstrates the coexistence of inconsistent meanings. As a result, a Saseol-sijo which sings about waiting for a lover can be interpreted through contraires such as prohibition and authorization, craving and concerns, exposure and concealment and concentration and dispersion. The nostalgic laughter in Saseol-sijo is generally based on the conflict between the craving self and the restrictive world. A character consumed by craving may seem ridiculous and pathetic in the view of others. However, people in general would find sympathetic humor and identify with characters who portray their weaknesses or repeat their mistakes. After all, this is the laughter of compassion and reflection which Saseol-sijo evoke.

• Journal of Internet Computing and Services
• /
• v.22 no.1
• /
• pp.99-107
• /
• 2021

With the recent establishment of a ubiquitous-based medical and healthcare environment, the medical information system for obtaining situation information from various sensors is increasing. In the medical information system environment based on context-awareness, the patient situation can be determined as normal or emergency using situational information. In addition, medical staff can easily access patient information after simple user authentication using ID and Password through applications on smart devices. However, these services of authentication and patient information access are staff-oriented systems and do not fully consider the ubiquitous-based healthcare information system environment. In this paper, we present a authentication service model based context-awareness system for providing situational information-driven authentication services to users who access medical information, and implemented proposed system. The authentication service model based context-awareness system is a service that recognizes patient situations through sensors and the authentication and authorization of medical staff proceed differently according to patient situations. It was implemented using wearables, biometric data measurement modules, camera sensors, etc. to configure various situational information measurement environments. If the patient situation was emergency situation, the medical information server sent an emergency message to the smart device of the medical staff, and the medical staff that received the emergency message tried to authenticate using the application of the smart device to access the patient information. Once all authentication was completed, medical staff will be given access to high-level medical information and can even checked patient medical information that could not be seen under normal situation. The authentication service model based context-awareness system not only fully considered the ubiquitous medical information system environment, but also enhanced patient-centered systematic security and access transparency.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.2
• /
• pp.377-391
• /
• 2019

Recently, system studies using tokens and block chains for authentication, access control, etc in IoT environment have been going on at home and abroad. However, existing token-based systems are not suitable for IoT environments in terms of security, reliability, and scalability because they have centralized characteristics. In addition, the system using the block chain has to overload the IoT device because it has to repeatedly perform the calculation of the hash et to hold the block chain and store all the blocks. In this paper, we intend to manage the access rights through tokens for proper access control in the IoT. In addition, we apply the Tangle to configure the P2P distributed ledger network environment to solve the problem of the centralized structure and to manage the token. The authentication process and the access right grant process are performed to issue a token and share a transaction for issuing the token so that all the nodes can verify the validity of the token. And we intent to reduce the access control process by reducing the repeated authentication process and the access authorization process by reusing the already issued token.

• The Korean Journal of Archival Studies
• /
• no.9
• /
• pp.3-40
• /
• 2004

In this article, the elements usually included in the official documents issued by the Chosun Governor General office, the process of a certain document being put together and legally authorized, and its path of circulation and preservation are all examined. In order to create an official document of the Governor General office with legal authorization, a draft of a bill had to go through several discussions and a subsequent agreement before it was finally approved. Personnels involved in the discussion stage had the authority to ask for modifications and retouching of the draft, and the modifying process were all recorded in order to make clear who was responsible for a certain change or who objected to what at any given stage of the process. The approved version of an official document was called the 'Completed one(成案), and it was issued after the contents were turned into a fair copy by the office that originated the draft in the first place. With the original finalized version left in custody of that office, the fair copy was handed over to the Document department which was responsible for issuing outgoing documents. After the document was issued and the contained orders were carried out, the originally involved offices began to classify the documents according to their own standards and measures for safekeeping, but it was the Document department that was mainly responsible for document preservation. The Document department classified the documents according to related offices, nature of the documents(편찬류별), and most suitable preservation methods(보존종별). The documents were made into books, and documents to be permanently destroyed were handed over to the Account office where they would be demolished. The manners of document processing of the Chosun Governor General office was in fact a modified version of the manners of the Japanese government. Modifications were made so that the process would be more suitable to the situations and environment of the Chosun society. The office's managing process was inherited by the Chosun government after the Liberation, and cast a significant impact upon the document managing manners of the Korean authorities. The official document administration of the Chosun Governor General office marked both the beginning of the colony document administration, and also the beginning of a modernized document managing system.

• The Journal of Korean Association of Computer Education
• /
• v.22 no.2
• /
• pp.1-9
• /
• 2019

In order to improve the quality of textbooks, this study analyzed seven informatics textbooks published based on the 2015 revised curriculum. Content analysis was used to analyze the organization system of these textbooks. Learning objectives of the textbooks were also analyzed according to Anderson's taxonomy of educational objectives. Furthermore, a textbook satisfaction survey, in which textbook selection criteria were applied, was given out to preliminary teachers. The results showed that the textbooks were similarly organized, centered on practice, activities, differentiated learning, and small group learning. However, the number of pages varies considerably for each chapter. After analyzing learning objectives of the textbooks, it was found that in terms of cognitive processes, 'understanding' (53%) was the highest item and 'analyzing' (16%) the second highest; in terms of type of knowledge, 'conceptual' (42%) and 'procedural' (31%) accounted for the two highest categories; in terms of cognitive domains, there has been a significant increase in 'analyzing' and 'creating' facets for learning objectives of these new versions of textbooks as compared to those of previously existed textbooks. In the satisfaction survey on a 5-point Likert scale, 'the accuracy and fairness of the content' had the highest points at 4.21 among four scale items. In this study, the improvement of the textbook is proposed based on the findings from this analysis.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.29 no.2
• /
• pp.261-273
• /
• 2019

Recently, with the development of IT technology, there is an increasing interest in cloud services as the number of users using mobile devices such as mobile phones and tablets is increasing. However, there is a need for techniques to control or control various methods of accessing data as the user's service demands increase. In this paper, we propose a dual key based user authentication model that improves the user 's authentication efficiency by using two keys (secret key and access control key) to access the users accessing various services provided in the cloud environment. In the proposed model, the operation process and the function are divided through the sequence diagram of the algorithms (key generation, user authentication, permission class permission, etc.) for controlling the access right of the user with dual keys. In the proposed model, two keys are used for user authentication and service authorization class to solve various security problems in the cloud service. In particular, the proposed model is one of the most important features in that the algorithm responsible for access control of the user determines the service class of the user according to the authority, thereby shortening the management process so that the cloud administrator can manage the service access permission information of the user.