• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.3
• /
• pp.162-173
• /
• 1996

Dry magnetic particle inspection(MPI) was performed to detect the surface defects of steel ingot cast billets. Magnetic properties of several materials were characterized by the measurement of the B-H hysteresis curve. The inspection results were evaluated in terms of the magnetizing current, temperature, and the amount of magnetic particles applied to billets. Magnetic flux leakage near the defect site of interest was measured and compared with the results of calculation by the finite element method in the case of direct magnetizing current. Direct and alternating magnetizing currents for materials were deduced by the comparison of the inspections. Results of the magnetic particle inspection by direct magnetizing current were compared with those of finite element method calculations, which were verified by measuring magnetic leakage flux above the surface and the surface defects of the material. For square rods, due to the geometrical effect, the magnetic flux density at the edges along the length of the rods was about 30% of that at the center of rod face for a sufficiently large direct magnetizing current, while it was about 70% for an alternating magnetizing current. Thus, an alternating magnetizing current generates rather uniform magnetic flux density over the rods, except for the region on the face across about 10 mm from the edge. The attraction of the magnetic particle by the magnetic leakage field was nearly independent of the surface temperature of the billets up to $150^{\circ}C$. However, the temperature should have been limited below $60^{\circ}C$ for an effective fixing of gathered magnetic particles to the billet surface using methylene chloride. We also found that the amount of applied magnetic particles tremendously affected the detection capability.

• Journal of Korean Society of Rural Planning
• /
• v.13 no.1 s.34
• /
• pp.85-95
• /
• 2007

Hot springs development will be more activated with the five-day work week system than before. Nevertheless, investment and development achievement of hot springs has not resulted in a successful performance to foster townships, and this calls upon locals to build a guideline to develop hot springs. This study intends to analyze laws on hot springs, which influence mostly on the hot spring development, to gather up the information on the present state of the development, and to suggest considerations for further development plans. Features of the hot spring development are as follows: One is that metropolitan cities will discover hot spring resources more than small cities. Therefore the development will be twofold : one for resort tour and the other for one-day rest and recreation. In addition, Korean laws on hot springs are more site development-oriented to support tourism and recreation than to protect environment and discover unused resources. This makes hot spring development easier and efficient being supported by hot spring law, law on territory development and use, and tourism promotion law. On the other side, planned landscape trimming can be uniformized and unharmonized in terms of local identity and environment-friendliness. This is why careful considerations such as goods and bads of the local resources, local history and culture are needed in hot spring development. A long-term development project should include remodeling based on local identity and development trends. The third point indicates that Korean hot springs development has recorded relatively low performance due to difficult private capital attraction, and a high fence on land purchase and development approval. It is essential to release restrictions on the hot spring development-especially on those whose development performance has not been successful so that best practice can be supported by the government in remodeling and marketing. New plans on hot spring development should be also examined based on developer's capacity and local authorities' volition on the plan. Last point shows that most hot springs development plans have been designed only based on territory utilizing plan and facilities arrangement, not considering much on fund-raising, operational plan or feasibility analysis. Therefore the tourism promotion law should reinforce guidelines on tourist site approval system by supplementing criteria. At the same time, an education on tourism development planning is necessary to deepen developers' understanding, since most developers are experts more on city development, landscape architecture, designing, constructing and engineering than tourism development.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.427-432
• /
• 1997

A selective method for the determination of iron(III) ion with a sodium dodecyl sulfate(SDS) modified glassy carbon electrode was proposed. It was based on the electrostatic attraction and complexation of the SDS modifier, $(DS^-)_n-Fe^{3+}$. The determination of iron(III) ion was performed by a differential pulse voltammetry(DPV), and the reduction peak potential of $(DS^-)_n-Fe^{3+}$ was +0.466(${\pm}0.002$)V vs. Ag/AgCl. For the determination of iron(III) ion, a linear calibration curve was obtained within the iron(III) ion concentration range of $0.50{\times}10^{-5}{\sim}10{\times}10^{-5}mol/L$, and the detection limit was $0.14{\times}10^{-5}mol/L$. $Cu^{2+}$, $Ni^{2+}$, $Co^{2+}$, $Pb^{2+}$, $Zn^{2+}$, and $Mn^{2+}$ showed little or no effect on the determination of iron(III) ion, respectively. But, ion such as each $CN^- $ and $SCN^-$ interfered seriously.

• Applied Chemistry for Engineering
• /
• v.23 no.1
• /
• pp.47-52
• /
• 2012

Porous carbon nanofibers were prepared as a gas sensor electrode to study the $CO_2$ sensing property based on effects of porosity and introduced amine functional groups. Electrospun fibers were obtained by using electrospinning method with polyacrylonitrile precursor and they were treated by the thermal treatment and chemical activation. Amine functional groups were introduced by the liquid state treatment using diethylenetriamine. The specific surface area increased up to $2000m^2/g$ by the chemical activation. The Introduced amine functional group was identified using FT-IR spectroscopy. $CO_2$ gas sensing property was improved as four folds via introduced amine functional groups on the activated carbon nanofiber. In conclusion, the gas sensing property was improved based on the developed porosity by the chemical activation and the chemical attraction of $CO_2$ gas by introduced functional groups.

• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1100-1106
• /
• 2008

In this study, we presented rapid and simple fabrication method of functionalized surface on various substrates as a universal platform for the selective immobilization of cells. The functionalized surface was achieved by using deposition of polyelectrolyte such as poly(allyamine hydrochloride) (PAH), poly(diallyldimethyl ammonium chloride) (PDAC), poly(4-ammonium styrene sulfonic acid) (PSS), poly(acrylic acid) (PAA) and fabrication of poly(ethylene glycol) (PEG) microstructure through micro-molding in capillaries (MIMIC) technique on each glass, poly(methyl methacrylate) (PMMA), polystyrene (PS) and poly(dimethyl siloxane) (PDMS) substrate. The polyelectrolyte multilayer provides adhesion force via strong electrostatic attraction between cell and surface. On the other hand, PEG microstructures also lead to prevent non-specific binding of cells because of physical and biological barrier. The characteristic of each modified surface was examined by using static contact angle measurement. The modified surface onto several substrates provides appropriate environment for cellular adhesion, which is essential technology for cell patterning with high yield and viability in the micropatterning technology. The proposed method is reproducible, convenient and rapid. In addition, the fabrication process is environmentally friendly process due to the no use of harsh solvent. It can be applied to the fabrication of biological sensor, biomolecules patterning, microelectronics devices, screening system, and study of cell-surface interaction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.62-69
• /
• 2020

This study examined Internet discourse on inter-regional co-prosperity. In particular, the study is interested in the co-prosperity between the Daegu-Gyeongbuk regions. The Internet discourse was searched through a set of four keywords: co-prosperity, economy, business attraction, and cultural tourism. The study also conducted sentiment analysis of YouTube comments to determine how the Internet responds to co-prosperity topics. The findings of the analysis are as follows. First, Internet discourse related to co-prosperity has evolved from abstract concepts to concrete cooperative measures and policy contents. Second, the discussion of co-prosperity has moved from outside help or support to self-sustaining innate motivation. Finally, YouTube sentiment analysis showed that if co-prosperity efforts between regions are promoted through concrete policy contents, it becomes easier to gain positive responses from citizens and lead a positive policy drive. In this regard, a study on Internet discourse is a useful means to detect citizens' response to inter-regional co-prosperity.

• 한국균학회소식:학술대회논문집
• /
• 2018.05a
• /
• pp.33-33
• /
• 2018

Air-borne plant pathogenic fungus Fusarium graminearum and seed-borne plant pathogenic bacterium Burkholderia glumae are cause similar disease symptoms in rice heads. Here we showed that two pathogens frequently co-isolated in rice heads and F. graminearum is resistant to toxoflavin produced by B. glumae while other fungal genera are sensitive to the toxin. We have tried to clarify the resistant mechanism of F. graminearum against toxoflavin and the ecological reason of co-existence of the two pathogens in rice. We found that F. graminearum carries resistance to toxoflavin as accumulating lipid in fungal cells. Co-cultivation of two pathogens resulted in increased conidia and enhanced chemical attraction and attachment of the bacterial cells to the fungal conidia. Bacteria physically attached to fungal conidia, which protected bacterium cells from UV light and allowed disease dispersal. Chemotaxis analysis showed that bacterial cells moved toward the fungal exudation compared to a control. Even enhanced the production of phytotoxic trichothecene by the fungal under presence of toxoflavin and disease severity on rice heads was significantly increased by co-inoculation rather than single inoculation. This study suggested that the undisclosed potentiality of air-born infection of bacteria using the fungal spores for survival and dispersal.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.3
• /
• pp.516-525
• /
• 2020

The densities of aqueous solutions of the amphiphile 2-(2-hexyloxyethoxy)ethanol (C₆E₂) were measured at 279.15 K and 282.15 K by vibrating-tube densitometry. Then using the density data of the binary C₆E₂ (1)/water(2) system, the excess volumes and partial molar volumes were determined at various compositions. Excess volume V^E exhibits negative deviation for the whole region of composition, which implies relatively stronger attraction between molecules. At the C₆E₂ mole fraction of around 0.45, V^E was at its minimum. Partial molar volume ${\bar{V}}_1$ increases monotonously with the mole fraction x₁(=x) and ${\bar{V}}_2$ decreases with x. Any particular point in ${\bar{V}}_1$ and ${\bar{V}}_2$, which may point to molecular association, was unobserved.

• Journal of Distribution Science
• /
• v.12 no.6
• /
• pp.41-48
• /
• 2014

Purpose - This study aims to investigate a solution to reduce the negative reactions arising from the performance of duties or the job distress of workers in the service industry, because human resource statistics regarding workers in the service sector have been unreported, while concerns regarding exposure to emotional exertion and poor working conditions have been continuously increasing. Research design, data, and methodology - This study specifically focused on workers in highway service areas. It differs from previous studies because it involves the perspective of the person-organization fit and regards workers' cognition of leaders through the psychological distance toward the leader and the contact frequency between workers and leaders within the framework of the leader-individual fit. Moreover, this study highlights the role of the self-leadership of workers as an important factor that becomes manifested in the individual-level fit to the organization. Hence, this study investigates whether the positive role of the above factors, in turn, could reduce job distress. Workers from highway service areas in Gyeonggi-do province provided data; 141 valid questionnaires are collected. SPSS 19.0 and AMOS 19.0 were used to test the reliability and validity of constructs. Simple regression, multiple regression, and 3 step mediation tests were used to test the hypotheses after the correlation tests. Results - Results indicated that leader-member contact frequency and psychological distance have negative effects on job distress but positive effects on self-leadership. A mediation test revealed that self-leadership, in the relationships between contact frequency and job distress and between psychological distance and job distress, resulted in partial mediation and full mediation, respectively. Conclusions - The result can be understood through two different possible explanations. First, service area workers generally possess a positive perspective toward their leaders. This can be interpreted to mean that increased contact frequency and psychological distance would be considered as supports from the leader, rather than intrusive controls or management schemes. Therefore, the management in highway service areas should invest efforts in increasing contact frequency as well as maximizing psychological similarities by adopting the viewpoints of workers in terms of moral and ethical management, to reduce the workers' job distress. The results relating to self-leadership also indicate that increased contact frequency must be accompanied by intentions for the effective promotion of workers' self-leadership. It also signifies the necessity of a strategic approach by leaders to induce workers to perceive "in-group"ness as suggested both by the similarity-attraction theory and by the social identity theory. In addition, the results of the mediation test of self-leadership indicate that because workers' self-leadership activates upon increased contact frequency by the leader, it should not be a means of control and should not be utilized only from the perspective of management. It is also suggested that strategies such as transfer of authority could have a positive effect in promoting the expansion of self-influence from workers.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.151-162
• /
• 2015

A theme park is a complex space, in which held is a performance & exhibition event created to make visitors feel fun and a deep impression through a certain theme. Recently, local governments are increasingly planning for theme parks with the aim of local economy revitalization. Accordingly, this paper set up a development model for a Korean culture theme park after deducting success factors for creating a successful theme park through the case of Korean culture theme park. To be concrete, this paper deducted the success factors through literature research and case research as follows: Setting of themes having identity and consistency; programs that can give fun and a deep impression; convenient support facilities reflecting customers' needs; differentiated marketing for progress in customer attraction power; location linked with cultural resources around a theme park and a space for communicating a message; privately-initiated project promotion and the main body of operation; target setting consequent on market segmentation, and demand forecast, etc. A theme park cannot be successfully operated to contribute to local economy revitalization until such success factors should be closely linked and harmonized with each other. In addition, in order for a theme park to make a continued growth, it's required that problems occurring at the operational stage should be endlessly improved, and contents strengthening should be continuously done in line with circumstances of the times and viewers' eye level.