• 한국대기환경학회지
• /
• 제27권6호
• /
• pp.641-649
• /
• 2011

The aim of this study is to understand the characteristics of exhausting particulate matters (PM) and to control emitted PM from meat cooking restaurants. We found that $PM_{2.5}$, $PM_{5.0}$ occupy 69.2% and 98.6% of total PM from pork cooking, respectively. Therefore, we can see that it is not easy to remove PM generated from a pork cooking process. The collection efficiencies of various control devices, which are a condensing scrubber, a cyclone, an impactor, an oil filter and an electrostatic precipitator (ESP), were measured and compared. ESP had the highest collection efficiency (88.6%) and condensing scrubber had the lowest one (68.0%). However, the system recovering property should be considered to choose a control device because PM from meat cooking process are extremely stickiness. Therefore, we can recommend that ESP following an impactor or a cyclone is the best combination to remove PM generated from meat cooking restaurants.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.337-337
• /
• 2012

Dye sensitized solar cell (DSSC) having high efficiency with low cost was first reported by Gr$\ddot{a}$tzel et al. Many DSSC research groups attempt to enhance energy conversion efficiency by modifying the dye, electrolyte, Pt-coated electrode, and $TiO_2$ films. However, there are still some problems against realization of high-sensitivity DSSC such as the recombination of injected electrons in conduction band and the limited adsorption of dye on $TiO_2$ surface. The surface of $TiO_2$ is very important for improving hydrophilic property and dye adsorption on its surface. In this paper, we report a very efficient method to improve the efficiency and stability of DSSC with nano-structured $TiO_2$. Atmospheric plasma system was utilized for nitrogen plasma treatment on nano-structured $TiO_2$ film. We confirmed that the efficiency of DSSC was significantly dependent on plasma power. Relative in the $TiO_2$ surface change and characteristics after plasma was investigated by various analysis methods. The structure of $TiO_2$ films was examined by X-ray diffraction (XRD). The morphology of $TiO_2$ films was observed using a field emission scanning electron microscope (FE-SEM). The surface elemental composition was determined using X-ray photoelectron spectroscopy (XPS). Each of plasma power differently affected conversion efficiency of DSSC with plasma-treated $TiO_2$ compared to untreated DSSC under AM 1.5 G spectral illumination of $100mWcm^{-2}$.

• 한국지구과학회지
• /
• 제24권4호
• /
• pp.325-336
• /
• 2003

관측지점의 위치를 살펴보면 해안으로부터 수영은 약 5m정도이고 해운대는 약 1km정도 떨어져 있다. 하지만 해운대에서의 해풍시작시간이 수영보다 빨리 나타난다. 따라서 국지순환모형인 LCM을 이용하여 수영과 해운대에서 해풍시작시간에 대한 지형의 효과를 수치모의 하였다. 이러한 현상은 야간의 복사냉각에 의해 형성된 흐름에 의한 것으로 분석되었는데, 도심지를 둘러싸고 있는 고지대의 경사면을 따라서 수렴된 공기가 가장 저지대인 수영지역으로 흘러가기 때문에 나타난 것으로 이러한 현상은 일출 후에도 나타난다. AWS자료를 분석한 결과, 수영에서 해운대에 비해 약 3배정도 강한 강풍현상이 나타났는데, 이는 수영지역이 야간공기의 유출구이기 때문이다. 이를 통해 지형조건이 해풍의 시작에 중요한 역할을 한다는 것을 알 수 있었다.

• 전기학회논문지
• /
• 제63권10호
• /
• pp.1485-1490
• /
• 2014

$SF_6$ gas has been used for power transformers or gas insulated switchgears, because it has the superior insulation property and the stable structure chemically. It has been, however, one of global warming gases and required to reduce the its amount. Some papers have reported that its amount could be reduced by mixing with other gases, such as $N_2$, $CF_4$, $CO_2$ and $C_4F_8$ and their mixture gases would cause the synergy effect. In this paper, we investigated the characteristics of DC plasmas on $SF_6$ mixture gases with $N_2$ at atmospheric pressure. $N_2$ gas is one of cheap gases and has been reported to show the synergy effect with mixing $SF_6$ gas, even though $N_2$ plasmas have electron-positive characteristics. 38 kinds of $SF_6/N_2$ plasma particles, which consisted of an electron, two positive ions, five negative ions, 30 excitation and vibration particles, were considered in a one dimensional fluid simulation model with capacitively coupled plasma chamber. The results showed that the joule heating of $SF_6/N_2$ plasmas was mainly caused by positive ions, on the other hand electrons acted on holding the $SF_6/N_2$ plasmas stably. The joule heating was strongly generated near the electrodes, which caused the increase of neutral gas temperature within the chamber. The more $N_2$ mixed-ratio increased, the less joule heating was. And the power consumptions by electron and positive ions increased with the increase of $N_2$ mixed-ratio.

• 청정기술
• /
• 제26권4호
• /
• pp.321-328
• /
• 2020

본 실험은 상용 촉매인 V/W/TiO2와 V/Mo/TiO2 촉매를 비교하여 SCR 반응에서 저온 활성에 미치는 영향 연구를 진행하였다. NH3-SCR 반응에서의 중요한 영향을 미치는 NH3 산점과 산소의 영향을 확인하기 위해 NH3-TPD, DRIFT, H2-TPR 분석과 O2-on/off 실험을 진행하였다. 반응 활성이 높은 온도인 250 ℃와 활성 저하가 크게 나타나는 180 ℃에서 반응 활성에 미치는 영향을 분석하였다. 250 ℃에서는 SCR 반응에 참여하는 NH3 중, B산점과 L산점이 반응에 참여하는 것을 확인할 수 있었으며, 기상의 산소가 반응에 참여하여 재산화 영향에 크게 나타내는 것을 확인할 수 있었다. 하지만 180 ℃에서는 B산점의 영향이 저하되고, 기상의 산소에 의한 재산화의 영향이 적어 활성이 저하되는 것으로 판단된다.

• 접착 및 계면
• /
• 제6권3호
• /
• pp.1-9
• /
• 2005

본 연구에서는 대기압 플라스마 공정으로 표면 처리 시 PMMA 시편의 표면 자유 에너지에 영향을 주는 인자인 radio frequency (RF) 플라즈마 전압(W), 처리시간(s), 방전 글로우와 시료와의 간격(mm) 그리고 아르곤 가스의 유량(LPM)에 대해 실험 계획법(Design of Experiment, DOE)을 적용한 최적화 실험을 실시하였다. 실험 결과, PMMA의 표면 자유 에너지 증가에 가장 큰 영향을 미치는 인자는 플라즈마 방전 글로우와 시료와의 간격(mm), 처리시간(t), 플라즈마 전압(W) 순으로 확인되었다. 또한 표면에 상호 영향을 미치는 플라즈마 전압과 처리시간에 대한 복합매개변수 형태의 power dose (J)에 따른 의존성을 확인했을 때 1500 J에서 최대의 표면 에너지 증가를 보임을 확인하였다. XPS, AFM 분석을 통해 플라즈마 처리 후 PMMA 표면에 새로운 관능기의 도입과 표면 거칠기 변화를 관찰하였다. 플라즈마 처리에 의한 PMMA plate의 표면 자유 에너지의 변화는 플라즈마 처리에 의한 관능기의 도입과 표면적의 변화에 영향을 받는 것으로 생각된다.

• Ocean Science Journal
• /
• 제42권1호
• /
• pp.49-59
• /
• 2007

Besides empirical algorithms with the blue-green ratio, the algorithms based on fluorescence are also important and valid methods for retrieving chlorophyll-a concentration in the ocean waters, especially for Case II waters and the sea with algal blooming. This study reviews the history of initial cognitions, investigations and detailed approaches towards chlorophyll fluorescence, and then introduces the biological mechanism of fluorescence remote sensing and main spectral characteristics such as the positive correlation between fluorescence and chlorophyll concentration, the red shift phenomena. Meanwhile, there exist many influence factors that increase complexity of fluorescence remote sensing, such as fluorescence quantum yield, physiological status of various algae, substances with related optical property in the ocean, atmospheric absorption etc. Based on these cognitions, scientists have found two ways to calculate the amount of fluorescence detected by ocean color sensors: fluorescence line height and reflectance ratio. These two ways are currently the foundation for retrieval of chlorophyll-a concentration in the ocean. As the in-situ measurements and synchronous satellite data are continuously being accumulated, the fluorescence remote sensing of chlorophyll-a concentration in Case II waters should be recognized more thoroughly and new algorithms could be expected.

• 대한기계학회논문집B
• /
• 제33권10호
• /
• pp.729-736
• /
• 2009

Pool boiling heat transfer and critical heat flux (CHF) of water-based nanofluids with alumina and titania nanoparticles of 0.01% by volume were investigated on a disk heater at saturated and atmospheric conditions. The experimental results showed that the boiling in nanofluids caused the considerable increase in CHF on the flat surface heater. It was revealed by visualization of the heater surface subsequent to the boiling experiments that a major amount of nanoparticles deposited on the surface during the boiling process. Pool boiling of pure water on the surface modified by such nanoparticle deposition resulted in the same CHF increases as what boiling nanofluids, thus suggesting the CHF enhancement in nanofluids was an effect of the surface modification through the nanoparticle deposition during nanofluid boiling. Possible reasons for CHF enhancement in pool boiling of nanofluids are discussed with surface property changes caused by the nanoparticle deposition.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.1001-1002
• /
• 2006

Special problem emphasized by specialists in the field of analyzing the heat interchanges in the system ocean-atmosphere (SOA) is a necessity of determination of the near-surface atmospheric temperature, which can be only indirectly connected with characteristics of the SOA natural microwave radiation measured from satellites. That is why, the following dilemma is not obvious, but interesting and promised: what is better - to use the satellite methods for retrieving the partial parameters of the SOA or for analysis its state as a whole. To our opinion, this task is similar to the idea recognized by specialists engaged in the heat infrared region (8-12 mcm) of electromagnetic spectrum and its applications, where an intensity of natural infrared radiation (effective radiation) is used as the inherent property (the attribute) of the SOA heat balance. Here we studied important aspects of this problem: a) what medium initiates a heat transfer in the SOA and disturbs its heat balance - the ocean or the atmosphere b) what SOA parameters directly influence on its natural microwave radiation intensity (brightness temperature) measured from satellites? We relate these processes mainly to the synoptic range of time scales enriched by various events in the SOA interface such as the mid-latitude and tropical cyclones.

• International Journal of Concrete Structures and Materials
• /
• 제10권1호
• /
• pp.15-28
• /
• 2016

With the aim to reduce the atmospheric $CO_2$, utilization of the carbonated lime produced from the aqueous carbonation reaction for the synthesis of a cementitious material would be a promising approach. The present investigation deals with the aqueous carbonation of slaked lime, followed by hydrothermal synthesis of a cementitious material utilizing the carbonated lime, silica fume, and hydrated alumina. In this study, the aqueous carbonation reaction was performed under four different conditions. The TGA, FESEM, and XRD analysis of the carbonated product obtained from the four different reaction conditions was performed to evaluate the efficacy of the reaction conditions used for the production of the carbonated lime. Additionally, the performance of the cementitious material was verified analyzing the physical characteristics, mechanical property and setting time. Based on the results, it is demonstrated that the material produced by the hydrothermal method possesses the cementing ability. Additionally, it is revealed that the mortar prepared using the alternative cementitious material yields $33.8{\pm}1.3MPa$ compressive strength. Finally, a plausible reaction scheme has been proposed to explain the overall performances of the aqueous carbonation as well as the hydrothermal synthesis of the cementitious material.