• 전력전자학회논문지
• /
• 제14권3호
• /
• pp.235-242
• /
• 2009

본 논문에서는 새로운 비대칭 PWM 제어 방식의 양방향 하프브리지 컨버터를 제안한다. 제안한 컨버터는 구조가 간단하고 넓은 듀티 범위를 가지므로 연료전지와 같은 넓은 전압변동을 가지는 응용에 적합하다. 제안한 비대칭 PWM 방식은 기존의 위상각제어 방식에 비해 스위치 및 변압기의 동작전류를 큰 폭으로 낮추었고 ZVZCS와 동기 정류 방식을 적용하여 높은 효율과 전력밀도를 가질 수 있다. 기존 컨버터와의 비교 분석을 수행하였으며 실험을 통해 본 방식의 타당성을 검증하였다.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1920-1929
• /
• 2018

In order to provide a source for nine phases suitable for 18-pulse ac to dc power, this paper proposes a new structure for a step-up asymmetrical delta-connected transformer for converting three-phase ac power to nine-phase ac power. The design allows for symmetry between the nine output voltages to improve the power quality of the supply current and to minimize the THD. The results show that this new structure proves the equality between the output voltages with $40^{\circ}-{\alpha}$ and $40^{\circ}+{\alpha}$ phase shifting and produces symmetrical output currents. This result in the elimination of harmonics in the network current and provides a simulated THD that is equal to 5.12 %. An experimental prototype of the step-up asymmetrical delta-autotransformer is developed in the laboratory and the obtained results give a network current with a THD that is equal to 5.35%. Furthermore, a finite element analysis with a 3D magnetic field model is made based on the dimensions of the 4kVA, 400 V laboratory prototype three-phase with three-limb delta-autotransformer with a six-stacked-core in each limb. The magnetic distribution flux, field intensity and magnetic energy are carried out under open-circuit operation or load-loss.

• 대한물리치료과학회지
• /
• 제16권2호
• /
• pp.27-37
• /
• 2009

Background: The musculoskeletal disorders with asymmetrical gait on the whole body are the most common. This study was designed to analyze that General Coordinative Manipulation Intervention Models would affect the balanced restoration of asymmetrical gait. Methods: 68 healthy volunteers(1st hypothesis: 46, 2nd hypothesis 22) participated in the two GCM intervention models, which have performed 2 times a week for 3 weeks. Digital Camera was used to measure the gait, and measurements were performed before and after the application of the each intervention model. Repeated measured ANOVA was used to determine a statistical significance. Results: The outcome of examining hypothesis is as follows: 1. The 1st hypothesis : GCM Intervention based on the coordinating the flexion type of upper body and the extension type of lower body will improve in the balanced restoration of asymmetrical gait because it offers a clear direction for treatment(p<.05). 2. The 2nd hypothesis: GCM Intervention based on the coordinating the flexion type of lower body and the extension type of upper body will improve in the balanced restoration of asymmetrical gait because it offers a clear direction for treatment(p<.05). Conclusion: GCM intervention programs on the two hypothesis groups have effects on the balanced restoration of asymmetrical gait(p<.05).

• 대한인간공학회지
• /
• 제30권5호
• /
• pp.613-619
• /
• 2011

Objective: The purpose of this study is to compare the muscle activities of lumbar and lower extremity muscles between left and right sides using EMG(Electromyogram) when patients are transferred by physical therapists. Background: Asymmetrical lift was recognized as a major cause of musculoskeletal disorder. Several studies show that physical therapists' transferring patients needs caution as it could cause a lumbar pain to patients but there is not sufficient data to support. Method: Forty healthy rehabilitation hospital physical therapists joined for this study. The subjects were transferred from wheelchair to treatment mat(from left to right) by connecting the EMG device to the patients' body both on erector spine and rectus fermoris. At the moment when subjects were being transferred, the EMG device collected data from both erector spine and rectus femoris and it was normalized as %MVC. Then the EMG data was statistically analyzed using paired t-tests. Results: The EMG data show that the left erector spinae and rectus femoris are more activated than right erector spinae and rectus femoris in all position(p<.05) in a significant degree. Conclusion: The result implies that physical therapists' asymmetrical lifting when patients are transferred by them has a potential cause of musculoskeletal disorder of patients. Further studies will be conducted to find out a same tendency in other muscles of a body and to see if there are other factors to affect to patients during asymmetrical lifting. Application: These results can be used to provide baseline information for more understanding to asymmetrical lift loading.

• 한국통신학회논문지
• /
• 제28권8A호
• /
• pp.626-632
• /
• 2003

본 논문에서는 모드정합법을 이용하여 도체두께를 고려한 비대칭 결합선로의 특성을 해석하고, 중심주파수 5㎓ 인 정방향 -3㏈ 방향성 결합기를 설계 및 제작하였다. 결합선로의 결합도에 대한 연구는 대부분 기하학적인 구조의 변화에 대해 연구되어 왔으나, 본 논문에서는 도체두께가 비대칭 결합선로의 간격, 선로 폭, 결합기의 길이에 미치는 영향을 이론적으로 분석하고, 도체두께를 고려한 비대칭 결합선로를 이용한 결합기를 설계하여 도체 두께가 두꺼울수록 강한 결합으로 인하여 정방향 결합기의 결합길이가 짧아지고 광대역 특성이 얻어지는 결과를 얻었다. 본 논문에서는 5㎓ 중심주파수로 한 도체두께가 서로 다른 비대칭 결합선로로 구성된 정방향 -3㏈ 결합기를 설계하고, 제작 및 실험을 통하여 약 -4.05㏈∼-4.09㏈의 결합특성을 갖는 주파수특성 측정결과를 얻어 설계 값에 거의 근접하는 것을 확인하였으며, 도체 두께를 고려한 정확한 설계로써 결합선로에서 강한결합과 광대역 특성을 만들 수 있다는 사실을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제27권3호
• /
• pp.413-418
• /
• 2006

Sodium hyaluronate (NaHA), water soluble polymer having ultra-high molecular weight, is characterized by using on-line frit inlet asymmetrical flow field-flow fractionation (FI-AFlFFF) and multiangle light scattering (MALS). This study demonstrates the capability of power programming FI-AFlFFF for the separation of NaHA and the applicability of FI-AFlFFF with MALS for the characterization of molecular weight distribution and their structural information. Since sample injection and relaxation in FI-AFlFFF are achieved by using hydrodynamic relaxation, separation of high molecular weight polymers can be achieved smoothly without halting the separation flow. Experiments are carried out with the two different NaHA products (a raw NaHA sample and a thermally degraded NaHA product) and molecular weight distribution and conformations in solution are determined. Influence of sample filtration on the change of molecular weight distribution is also discussed.

• 대한전기학회논문지
• /
• 제41권9호
• /
• pp.953-959
• /
• 1992

As the TC(time-current) curve corresponding to symmetrical time invariant RMS value has been traditionally chosen and used for setting the relay, it has caused the misoperation errors on relay coordination because of CT secondary current being actually an asymmetrical time varying RMS value. In this paper, an algorithm for calculating the relay operating time is developed to study the asymmetrical effect using the step-by-step method. We represent the relay operating time errors between with and without DC offset versus PSM(plug setting multiplier), TMS(time multiplier setting) and X/R ratio. And also we present the correction factor. Finally we confirm the validity of this technique through the case study.

• 복식문화연구
• /
• 제6권4호
• /
• pp.84-103
• /
• 1998

The purpose of this study si focused on Futurism style and contemporary fashion in the 20th century, by researching the Giacomo Balla, Fortunato Depero, Tullio Crali, Erenesto Thayate characteristics fashion design. The results of this study are following as : The general traits of Futurism style are classified with aesthetics, formative characteristics. First, aesthetic characteristics are based on H. Bergson's life-phylosophy and F. Nietzche's art theory. Second, formative characteristics is Dynamism. Futurism Dynamism are classified with psychological Dynamism and physical Dynamism. Futurism trends in the costume : first, dynamism in fashion design, second, asymmetrical balance, third, formativeness, forth, technology, fifth, anti-traditionalism. Dynamism are expressed textile, pattern and costuem shape in contemporary dress. Asymmetrical balance are expressed costume silhouette shape and framework through the geometrical asymmetrical balance. Formativeness are agree with Paco Rabanne's fashion design expressed body and movement and phychological world of human through the secondly fabric. Technology are expressed new mechanical dynamism in used technology art and new fashion material by metal. The last, anti-traditionalism is recognized new value and idea in fashion.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1376-1385
• /
• 2017

This paper proposes a method for estimating the expected frequency of voltage swells caused by asymmetrical faults in a power system. Although voltage swell is less common than voltage sag, repeated swells can have severe destructive impact on sensitive equipment. It is essential to understand system performance related to voltage swells for finding optimal countermeasures. An expected swell frequency at a sensitive load terminal can be estimated based on the concept of an area of vulnerability (AOV) and long-term system fault data. This paper describes an effective method for calculating an AOV to voltage swells. Interval estimation for an expected swell frequency is also presented for effective understanding of system performance. The proposed method provides long-term performance evaluation of the frequency and degree of voltage swell occurrences.

• Journal of Power Electronics
• /
• 제10권1호
• /
• pp.14-20
• /
• 2010

In this paper, a tightly regulated triple output asymmetrical half bridge flyback (ASHF) converter is proposed. In order to regulate all output voltages, pulse frequency modulation (PFM), pulse width modulation (PWM) and phase delay (PD) are used simultaneously. In comparison with the conventional PWM-PD method, the interactions among the control variables are minimized and the operating range is increased. By the utilization of a multi winding transformer, the auxiliary transformer and the blocking capacitor are eliminated and the size and cost of the proposed converter is reduced. The operation principle of the converter is explained and the modes of operation are investigated. Based on the results, the steady state characteristics of the converter are explored. A 24V/10A, 12V/5A, 5V/10A hardware prototype is built and tested to verify the analysis results and the voltage regulation of the triple outputs of the proposed converter.