• 한국전자파학회논문지
• /
• 제23권10호
• /
• pp.1188-1195
• /
• 2012

향후 레이더는 능동 위상 배열레이더(Active Phased-Array Radar System)로 발전하는 추세이다. 특히, 다채널 수신 시스템에서 실시간 신호처리를 위해서 신호처리용 보드의 처리 속도와 개수와의 trade-off는 최적화 되어야 한다. 본 논문에서는 많은 양의 수신 데이터를 안테나부에서 신호처리부로 전달하기 위한 전송 기법에 대하여 소개하고자 한다. 그 결과, 기존 방법에 비해 신호처리부의 S/L 보드 개수는 절반(1/2) 수준으로 감소하였고, 통신 전송 속도 여유 마진은 약 2배 더 증가되는 효과가 있다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.735-741
• /
• 2003

A simplified view of array design and application process was introduced. Array design is critical to achieve a successful phased array measurements. A planar microphone array is designed to produce optimum performance and also to fit economic requirement in integrating data acquisition system. Certain performance characteristics are of primary concern when designing arrays. These characteristics include array resolution, spatial aliasing and array sidelobe suppression. Every array has its directional pattern that shows such characteristics. Assuming that a monopole source is located in center, beam-patterns have been simulated varying measurement conditions such as number of sensors. array aperture size, distance between array and source, frequency of interest and so on. Sensor correction was conducted on very channel using magnitudes and phased of FRF with respect to a reference microphone channel. Then with a spiral type array, measurements have been made with two point sources of same frequency in order to investigate array resolving abilities. It is observed that higher frequency source achieves better resolution than lower one does.

• 한국정보통신학회논문지
• /
• 제14권7호
• /
• pp.1603-1609
• /
• 2010

본 논문은 해군 호위함급에 장착/운용되는 LAS(Line Array Sensor, 예인선배열센서)로부터 A, B, C그룹 수중음향 신호의 시리얼 데이터를 입력 받아 약속된 Protocol로 Packing하여, 고속 데이터통신과 Optic-fiber채널 장거리 전송이 가능한 SFM(Serial FPDP Module)을 통해 신호처리단으로 실시간 전송하는 센서데이터 입출력처리보드의 설계/제작 및 시험에 관해 언급한다. VME(Versa Module Eurocard) 6U크기의 한정된 보드 공간을 고려하여 Freescale사의 PowerPC계열인 MPC8265 CPU와, 기존 외장 FIFO등의 외부디바이스를 줄이고 자체 시뮬레이션 데이터생성 등을 위해 Altera사의 CycloneIII 계열 FPGA등을 사용하여 설계하고, 실시간 데이터 전송을 보장하며 각종 Device Driver, Peripheral Controller등의 Library를 제공하는 RTOS인 VxWorks를 Porting하여 소프트웨어를 개발하였다.

• 한국시뮬레이션학회논문지
• /
• 제8권2호
• /
• pp.29-43
• /
• 1999

As real-time processing of data with large storage space is required in the era of multimedia, disk arrays are generally used as storage subsystems which be able to provide improved I/O performance. To design the cost-effective disk array, it is important to develop performance models which evaluate the disk array performance. Both queueing theory and simulation are applicable as the method of performance evaluation through queueing modeling. But there is a limit to the analytical method using queueing theory due to the characteristics of disk array requests being serviced in the parallel and concurrent manner. So in this paper we evaluate the disk array performance using simulation method which abstract disk array systems in the low level. Performance results were evaluated through simulation, so that mean response time, mean queueing delay, mean service time, mean queue length for disk array requests and utilization, throughput for disk array systems, can be utilized for capacity planning in the phase of disk array design.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.141-144
• /
• 2000

In this paper, a new parallel array structure for the asynchronous array multiplier is introduced. This structure is designed for a data dependent asynchronous multiplier to reduces power which is wasted in conventional array structure. Simulation shows that this structure saves 30％ of power and 55％ of computation time comparing to conventional booth encoded array multiplier.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2002년도 춘계학술대회
• /
• pp.97-106
• /
• 2002

Taguchi parameter design, the product-array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined-array approach, was suggested by Welch et. al. and studied by others. In these studies, only single quality characteristic was considered. We propose how to simultaneously optimize multiple quality characteristics using desirability function when we used the combined-array approach to assign control and noise factors. An example is illustrated to the combined-array approach.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.87-90
• /
• 1987

This paper gives the Sonic Range Finder(SRF) Array which detects the unknown obstacles on the mobile robot's path. This SRF Array gives mobile robot's circumstance information wider, processes and transfers them to the locomotion module to construct the modify path. In this system, 8 pairs of the 40 KHz ultrasonic sensors constitute the SRF Array, including a pair of reference sensors to correct the errors, 4051 analog multiplexer and demultiplexer swtch the sensor with time and 8031-on chip micro computer controls processes the data and communication the others.

• Journal of the Korean Data and Information Science Society
• /
• 제14권2호
• /
• pp.325-335
• /
• 2003

Robust design is to identify appropriate settings of control factors that make the system's performance robust to to changes in the noise factors that represent the source of variation. In the Taguchi parameter design, the product array approach using orthogonal arrays is mainly used. However, it often requires an excessive number of experiments. An alternative approach, which is called the combined array approach, was suggested by Welch et. al. (1990) and studied by others. In these studies, only single response variable was considered. We propose how to simultaneously optimize multiple responses when we use the combined array approach.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.699-704
• /
• 2008

This paper describes a general approach for processing data from an omni-directional guided wave transducer array for the rapid inspection of large plate structures. A basic phased array algorithm is presented that can be applied to any array Geometry. For guided waves on plate, beam steering algorithm is derived and the corresponding beam pattern is analyzed. The algorithms are applied to simulation and experimental data. The results show well its usefulness in structural applications.

• 한국소음진동공학회논문집
• /
• 제19권1호
• /
• pp.56-63
• /
• 2009

This paper describes a general approach for processing data from an omni-directional guided wave transducer array for the rapid inspection of large plate structures. A basic phased array algorithm is presented that can be applied to any array geometry. For guided waves on plate, beam steering algorithm is derived and the corresponding beam pattern is analyzed. The algorithms are applied to simulation and experimental data. The results show well its usefulness in structural applications.