• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.488-501
• /
• 2008

The purpose of this study presents bra pattern using the 3D measurements of the upper body subject to women in their 30's. Brassieres available in the market are mostly designed for straight body shape and many women seem to have experienced bearing discomfort in a great extent as they grow older. Brassieres should be designed to cover diverse body types and the accurate measurement of body type and breast shape is needed to accomplish that. As for the study method, 3D human body types were analyzed with RapidForm 2006, and the upper-body types and breast shapes were statistically classified through technical statistics analysis, cluster analysis, t-test, variance analysis, and cross analysis. The wearing tests went through the comparison of the brassieres of three makers in the market and the experiment brassieres(first and second) and then the evaluations were made by the subjects, the outer appearance assessment by experts, and 3D measurements. The results of this study showed that the evaluation of experiment brassieres was excellent in every item, and the significant difference was found out particularly in the items of pressure, rear center, front center, breast underneath, adequate level by wing, and adequate level by armhole. According to the results of 3D evaluation, experiment brassieres had a highest point in fitness with no physical pressure at the wing part and no overall deviation at the cup part.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.3
• /
• pp.440-458
• /
• 2019

Based on a 3D body data and pattern comparison analysis, this study developed a formal jacket pattern for men in their late 30s. In order to select the representative type of men in their late 30s, factor analysis and cluster analysis were conducted on data form 319 men, 35 to 39 years old using the anthropometric data from The 7th Size Korea (2015) as the representative body type. The surface of the body surface was developed using a 3D human shape of a male in his 30s in The 6th Size Korea (2010). Then the shape was changed to a flat pattern that confirmed the necessary elements for setting the shape and dimension. Cluster analysis revealed type B as the representative type because it showed the best shape characteristics for men in the late 30s. The drafting method of the final research pattern is as follows. Jacket length: stature/2.5cm, back length: stature/5+8.5cm (constant)], armhole depth: [stature/ 7-1.5cm (constant)], back width: [C/9+9.5cm (constant)]+1cm (ease), front width: [C/9+8.5cm (constant)]+1cm (ease), armscye depth: C/8, front waist darts: 1cm, front closure amount: 2cm.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.143-154
• /
• 2020

In this study, four types of bodice patterns of elderly males in their 70s and 80s were made, and appearance evaluation was conducted through 3D simulation. For objective evaluation, airgap, cross section, color distribution, etc. were analyzed to compare differences between patterns. The pattern shape of bodice for elderly males was a pattern without darts except for the L pattern. As a result of appearance evaluation for 3D simulation, the elderly males' pattern was found to have a significant difference among the patterns on the front, side, and back items, and the H pattern was analyzed as the best pattern in all items except the armhole shape on the side. As a result of evaluating the airgap, color distribution, and cross-section, the most suitable pattern for the elderly male's body type was analyzed as the H pattern. Based on the H pattern, it is thought that the development of a pattern suitable for the upper body shape of elderly male should be made.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.6
• /
• pp.1002-1015
• /
• 2018

In this study, we analyzed the results of virtual clothing simulation according to the difference in the lateral neck point as well as the front and back shoulder inclination angles of the bodice foundation. Lim's (2016) (S) and Lee's (1999) method (L) were selected as the different setting for the lateral neck point. S1, S2, L1 and L2 were developed by changing the shoulder inclination angles. The SND and LND were developed by removing the darts in the S and L, respectively; in addition, the SND1, SND2, LND1, and LND2 were developed with different shoulder inclination angles. The results of S and L were similar with only slight differences observed in the armhole shape. However, the results of SND and LND were very different. The patterns of the S series were similar to each other, but the patterns of the L series were different. In addition, the patterns of the SND and LND series could not find a similar trend.

• The Research Journal of the Costume Culture
• /
• v.31 no.6
• /
• pp.738-755
• /
• 2023

The purpose of this study is to provide basic data for the production of jackets with high fit by comparing and analyzing the adhesive and non-adhesive production methods of men's jackets. An analysis of the manufacturing method showcased differences between the adhesive and non-adhesive manufacturing methods in the cutting and wick attachment method, the shape and attachment method of the chest reinforcing wick, the sleeve attachment method, and the shoulder pad and sleeve reinforcing cloth attachment method. In evaluating the outfit, the overall fit of the shoulder, the fit of the chest, and the fit of the armpit were found to be high in the non-adhesive production method. In evaluating appearance evaluation, the front shoulder, chest, and sleeve overall appearance showed a high non-adhesive production method. Therefore, in order to increase the wearability of the shoulder pad and the the attachment method of the upper sleeve reinforcing cloth, the non-adhesive production method should be used, and in order to increase the overall wearability and armpit wear of the chest, the difference in the attachment method, and the reinforcement method of the armhole should be used. In addition, to increase the appearance of the jacket, non-adhesive production methods such as differences in wick attachment methods, shoulder pads, sleeve reinforcing cloth, and sleeve attachment methods should be used.

• The Research Journal of the Costume Culture
• /
• v.20 no.5
• /
• pp.621-634
• /
• 2012

With comparative analysis of running-type brassieres on the market about suitability for middle-aged women, this study is to provide basic data of running-type brassieres' pattern which is highly suitable. In the pursuit of this purpose, this study carried out wearing experiment targeting 3 middle-aged women with normal body shape which is 85B of chest circumference. The result is as follows. The significant difference was recognized in the breast. The products were rated in order of C>A>B>D, E, F, G>H by the observers, and C>B>D>A>F>E=G>H by the subjects. The significant difference was recognized in the armhole area. The products were ranked in the order of C, D>B, G, E>A, F, H by the observes and D, C>B>G>F>A>H by the subjects. The significant difference was also recognized in 6 categories(14~19) for the torso. According to the overall average values, the products were rated in the order of B, C, D>A, D, F, G by the observers and B=D>C>H>F>G>A>E by the subjects. The overall evaluation exhibited the significant difference. The products were ranked in the order of D>C>E>B>H>A>G>F by both observers and subjects. Therefore it was confirmed that the product D was appropriate in general. To conclude of comparative analysis about 8 kinds of running-type brassieres on the market, the average values of the product C and D in all categories had high marks for each category. The product C was comfortable and capable of covering the breast well, however, a gap was formed in outside-up part. The product D, made from lacy fabric, was very comfortable and well-fitted but there was inconsistency between the mold-cup and the breast shape.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.18 no.2
• /
• pp.35-49
• /
• 2016

Dopo was the clothing of the Joseon period, which had a strong value of Confucianism. Apart from the kings and princes, government officers and Confucian literati wore Dopo as their official clothing and the uniform. The basic form of Dopo had the straight collar similar to Jikryeong. The difference is the shape of a Mu, which was fixed inside or on the back section along the side line of the front section and made two flaps on the back section. The clothing found in the tombs of Bae Cheonjo (1532~?) are from the mid-16th century to the early 17th century with the clothing style of the early Joseon period. The outer collar of all clothing was the shawl collar except for the Sibok and the inner collar was sewn to this. Two items had square tray collars, which were folded in half and sewn inside in half. The sleeve had a straight inseam from the armhole and its end around the wrist was round and wide. The carp-shaped inseam of the sleeve and wide sleeve indicated a change of sleeve shape. The shapes of the collars and the wide overlapped section of the dual collars demonstrated the shapes of the initial outer robes. The man's outer coats with wide sleeves were mostly cotton-quilted clothing. As described above, this paper examines the basic shapes of outer robes including Sibok, Jikryeong and man's outer coats on the basis of the clothing and artifacts from the tomb of Bae Cheonjo (1532~?) and examined the shapes, composition and features of Dopo. This paper aims to improve awareness of the wisdom and spirit of ancestors in life hidden in the sewing of the three Dopo items and on the importance of historical research.

• Journal of the Korean Society of Costume
• /
• v.50 no.5
• /
• pp.117-130
• /
• 2000

The purpose of this thesis is to offer basic data for clothing design which is intended to apply appropriate shape and capacity to clothes. The following are the analyzed results of an investigation which was conducted to characterize the upper half of the female body of 193 women whose ages are 18 to 25, taking part in this investigation. According to the results of analyzing young women's bust, I came to find a large individual difference of the wide varying factor numbers at the items of the side feature, the body stance, and the dart quantity. For the analysis of the female's upper body, 11 factors are used. The are as follows: Factor 1. width of the bust Factor 2. height of the bust and length of the arm Factor 3. side thickness of the bust and the upside type Factor 4. length of the bust on the front Factor 5. length of the bust on the back Factor 6. salient ratio of the breast Factor 7. width of the neck. the armhole, and measurement of the droop Factor 8. length of the shoulder Factor 9. flat ratio of the bust Factor 10. inclination of the shoulder factor 11. form of the back The shape of young women's upper bodies can be divided into four groups. The character ization of each group are as follows : Group 1 . 28.5% of the women who take part in this investigation belong to Group 1 These women have the shortest body, with a longer length of the front than the back and more thickness on the front than the back. Group 2. 21.1% of the women who take part in this investigation belong to this group. They show a longer length of the back and more thickness of the back than the front. In addition, this group is bent forward. Group 3. This group is the mast common type, showing the shortest and thickest character. 37.8% of the women who take part in this investigation have this bust character Group 4. 12.4% of the women belong to Group 4. They possess the highest and fattest character, skewing smaller necks, armholes, and waists than the other groups. This group also shows the drooping shoulders.

• Korean Journal of Human Ecology
• /
• v.21 no.2
• /
• pp.285-298
• /
• 2012

Considerable number of women are enjoying swimming, however, the chest-region of swimsuits including cup inserts are not stable during swimming. The purpose of this study was to explore alternate designs and methods of stabilizing the breast cup to the swimmer's body by using 3D technology to design and position the pad and cup pattern of the swimming suit. To position the pad optimally, a 3D pattern of a nude woman was divided into blocks and different reduction rates were applied to blocks around the outlines of the breast. Two types of 3D patterns were developed. The first, referred to as the 'basic 3D pattern' provided for the curved surface of the breast point to be maintained with the remaining slack distributed evenly along the neckline, armhole and side seam. The second, referred to as the '1/3 shoulder moved 3D pattern' ignored the curved nature of the breast point by overlapping, with the resulting position of the shoulder strip moved toward the center. Three women of corresponding size and body shape evaluated the two 3D pattern designs as well as the conventional 2D pattern style of swimsuit. Respondents rated the'the basic 3D pattern' design highest in terms of stability and easy of movement in the chest region.

• Korean Journal of Human Ecology
• /
• v.21 no.2
• /
• pp.299-314
• /
• 2012

The purpose of this study was to explore effects of pattern alteration using a virtual clothing simulation approach in combination with 3D analysis software. Three raglan sleeves of different patterns were worn by an avatar using virtual clothing simulation with silk and cotton as the test fabrics. It was observed that the silhouette and hemline shape were affected differently based on raglan sleeve pattern and fabric type. By examining clothing pressure distribution, the cotton fabric designs and pattern shapes provided for a variety of influences on armhole and bust regions as well as the back sleeve area. For representative locations, cross section circumstance, cross section area, and volume were measured by using 3D analysis and the resulting correlation between the 2D and 3D data were investigated. Among different fabrics, there was little difference between the 2D and 3D clothing surface area. However, when using 3D analysis, clothing volume was significantly affected by different fabrics and pattern types. By simultaneously adopting the virtual simulator and 3D analysis, quantitative assessment of virtual clothing simulation was successfully conducted. In light of the results of this study, the resulting methodology is expected to be used as a comprehensive evaluation tool for virtual clothing simulation wear testing.