• The Journal of Korean Physical Therapy
• /
• v.17 no.4
• /
• pp.493-504
• /
• 2005

The purpose of this study is to determine the effect of constraint-induced movement therapy on the involved hand function and ADL in stroke patients. Five subjects with fixing unaffected arms by CIMT were assigned to the experimental patient group and the other five patients to control group without fixing unaffected arms. The function of hand for both groups were evaluated by using Jebsen-Taylor hand function test and ADL for both groups were evaluated by FIM(Functional Independence Measure) before and after task practice. In conclusion, results of this study showed that improved hand function and ADL by CIMT in stroke patients. We concluded that CIMT can improved the involved hand function and ADL in stroke patients.

• Physical Therapy Rehabilitation Science
• /
• v.10 no.3
• /
• pp.374-378
• /
• 2021

Objective: Bilateral movement training is an effective method for upper extremity rehabilitation of stroke. An approach to induce bilateral movement through functional electrical stimulation is attempted. The purpose of this study is to develop an EMG-triggered functional electrical stimulation device for upper extremity bilateral movement training in stroke patients and test its feasibility. Design: Feasibility and Pilot study design. Methods: We assessed muscle activation and kinematic data of the affected and unaffected upper extremities of a stroke patient during wrist flexion and extension with and without the device. Wireless EMG was used to evaluate muscle activity, and 12 3D infrared cameras were used to evaluate kinematic data. Results: We developed an EMG-triggered functional electrical stimulation device to enable bilateral arm training in stroke patients. A system for controlling functional electrical stimulation with signals received through a 2-channel EMG sensor was developed. The device consists of an EMG sensing unit, a functional electrical stimulation unit, and a control unit. There was asymmetry of movement between the two sides during wrist flexion and extension. With the device, the asymmetry was lowest at 60% of the threshold of the unaffected side. Conclusions: In this study, we developed an EMG-triggered FES device, and the pilot study result showed that the device reduces asymmetry.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.99-113
• /
• 2020

In the future, robots and drones for the convenience of our lives in everyday life will increase. As a method for controlling this, a remote control or a human voice method is most commonly used. However, the remote control needs to be operated by a person and can not ignore ambient noise in the case of voice. In this paper, we propose an economical attitude information acquisition method to accurately acquire the posture information of the arm in real time under the assumption that the surround drones or robots can be controlled wirelessly with the posture information of the arm. For this purpose, the extended Kalman filter was used to eliminate the noise of the arm position information. in order to detect the arm movement, a low cost MEMS type sensor was applied to secure the economical efficiency of the apparatus. To increase the wear ability of the arm, We developed a compact and lightweight attitude information acquisition system by integrating all functions into one chip as much as possible. As a result, the real-time performance of 1 ms was secured and the extended Kalman filter was applied to acquire the accurate attitude information of the arm with noise removed and display the attitude information of the arm in real time. This provides a basis for generating commands using real-time attitude information of the arm.

• Fashion & Textile Research Journal
• /
• v.8 no.2
• /
• pp.203-208
• /
• 2006

The purpose of this study is to examine the ergonomic working uniform. Developing a prototype uniform will be the first stage in aiming to create a working uniform in the construction field. This study was conducted using a questionnaire in the construction field of Daegu city, and the data was gathered from 121 questionnaires. Some of the questions that were asked, were about the case of putting on and removing the uniform and if any areas of uniform caused discomfort. The areas of the uniform that caused problems were the waist, knee, shoulder, arm and neck regions. The free range of movement of these regions were restricted and caused the person to feel cramped. The results of the questionnaire called for improvements to the knee, waist, shoulder and crotch area. The prototype that was developed offered more range of movement in the knee and crotch area, while not causing the uniform to be cramped too much during motion. The prototype also improved comfort by raising the waist line of back part, and by having the ability of the uniform to be tightened or loosened with zipper according to the persons preference. The upper area of the uniform was improved by dropping the shoulder seam line which enhanced comfort and also allowed a better fit for the elbow and wrist. The prototypes additional feature included a slit zipper in the sides of the trousers and a gusset in the under arm area to improve breathability and sweat elimination.

• Physical Therapy Korea
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2009

Anticipatory postural adjustments is an example of the ability of the central nervous system to predict the consequence of the mechanical effect of movement on posture and helps minimize a forth coming disturbance. The aim of this study was to evaluate the sequence of activation of the trunk muscles during the performance of hip and shoulder movement and to determine the relationship between anticipatory activity and subjects' motor and functional status in subjects with hemiplegia post stroke. Twenty-four poststroke hemiparetic patients enrolled in this study. Electromyographic activity of the lumbar erector spinae, latissimus dorsi, and of the obliquus internus muscles was recorded bilaterally during flexion of both arm and from the rectus abdominis, obliquus externus, and obliquus internus muscles during flexion of both hip. Onset latencies of trunk muscles were partially delayed in the subjects with hemiplegia post stroke (p<.05). With upper limb flexion, the onset of erector spinae muscle and latissimus dorsi muscle activity preceded the onset of deltoid on both side respectively (p<.05). A similar sequence of activation occurred with lower limb flexion. Also the onset of external oblique muscle and rectus abdominis muscle activity preceded the onset of rectus femoris muscle on both side (p<.05). Major impairments in the activity of trunk muscles in hemiparetic subjects were manifested in delayed onset between activation of pertinent muscular pairs. These problems were associated with motor and functional deficits and warrant specific consideration during physical rehabilitation of post stroke hemiparetic patients.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.212-222
• /
• 2008

This study investigated the clothing easiness of movement when wearing casual Hanbok(Saenghwal Hanbok), as a high school student uniform, and produced some recommendations for improving the Hanbok. Casual summer-uniform Hanbok produced from different types of materials were produced for this study. They were P/R, P100, P/C, and P/R/S for the blouses, with P/W, P100, P/R, and P/W/F for the skirts. Their clothing easiness of movement were then tested at $25{\pm}1^{\circ}C$ and $50{\pm}10%$ R. H. The results were as follows: The easiness of movement for casual Hanbok was marked as $3.7l({\pm}1.03)$ on average which is higher than those of other garments, so it can be presumed that the easiness of movement for the tested clothes was quite good. The easiness of movement was lower, however, when students had their arms up front, right arms upright, arms crossed on the cheats, and bent forward whereas they were more comfortable when standing straight and sitting on a chair at 90 degrees. In terms of easiness of movement, the following ranking was revealed: waist, bust, shoulder, back, armhole, and upper arm. The easiness of movement for casual Hanbok skirts was quite good, and on average marked around $4.26({\pm}.77)$. Standing straight was the most comfortable position, when they bend forward 45 degree and 90 degree were the most uncomfortable positions. The buttocks area was also more comfortable than the waist area for casual Hanbok skirts.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.12
• /
• pp.5684-5691
• /
• 2011

The purpose of this study is to examine effects of constraint-induced movement therapy(CIMT) and/or cognitive-perceptual training(CPT) on the change of hand function in cerebrovascular accident(CVA) patients and to evaluate the change in the amount and quality of use of the affected upper extremity in performing daily living tasks. The subjects of study were 10 patients who had been under rehabilitation for more than three months after CVA onset. They were all determined as mild cognition impairment according to NCSE or MVPT test. For CIMT group, to restrict the movement of the unaffected hand the subjects had been worn modified resting arm-splint in daytime for 4 weeks. For CIMT+CPT group, the subjects were performed CPT with CIMT and control group had been under conventional occupational therapy for the same period. CIMT+CPT group showed significant improvement in simulated feeding, lifting large light objects, and lifting large heavy objects of Jebsen-Taylor Hand Function Test. CIMT group also showed significant improvement compared with control group. The mean changes of the amount of use(AOU) of the affected arm had a statistically significant difference among groups (p<.05). While CIMT+CPT group had the biggest change in the quality of movement(QOM) of upper extremity of the affected side, CTL group showed the smallest change. Both CIMT and CIMT+CPT groups had statistically significant difference in the change in the quality of movement in upper extremity of affected side with CTL group(p<.05), but there was not significant difference between CIMT group and CIMT+CPT group. CIMT performed to the patients of stroke, with mild impairment in cognitive perceptual abilities showed the improvement in hand movement and AOU and QOM of upper extremity in the affected side and the combination of CIMT with CPT showed synergic effects.

• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.613-620
• /
• 1999

Brake judder{or cold judder) caused by the disc thickness variation(DTV) is investigated experimentally, This cold judder is often perceived by steering wheel vibration, brake pedal pulsation, and vehicle body vibration. In this paper, how the DTV profile affects the vibration characteristics of vehicle body is shown by order tracking analysis(OTA) and operational vibration analysis(OVA) The tri-axial vibrations are measured at the knuckle, lower rm, and the body side of the lower arm. Also, measured are the wheel speed and the detail DTV profile. The interpretations of OTA results in three directions of tested vehicle indicate the relative importance in the contribution of the run-out and the DTV to the judder vibration. Also, the OVA results show the prominent vibration amplitude of the lower arm in the direction of the vehicle movement. in which the second order of wheel speed is dominant. These results could be used to diagnose the judder problem and to establish the correction methods.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.5
• /
• pp.573-584
• /
• 2011

The purpose of this study was to perform a kinematic analysis of the high jump techniques of the three men's medalists at the 2011 IAAF Championships in Daegu (August 27-September 4, 2011). In particular, a three-dimensional coordinates method was used to analyze the last three strides before touchdown, the touchdown techniques, and the movements after takeoff toward the bar. An analysis of the, data for the biomechanical characteristics of the world's best high jumpers could contribute to an improvement in the performance of a national high jumper. The first conclusion of the data analysis was that the arm movements of the gold medalist, J. Williams, had a single arm form, whereas the arm movements of the other medalists were a double arm form. Second, the difference in the knee joint angles upon touchdown and toe-off was $10^{\circ}$. Third, J. Williams achieved his maximum CM height after takeoff (1.26 m) using the maximum flexion of his knee joint. Fourth, the foot contact duration of A. Dmitrik (0.11 s) was the shortest among the medalists, and the ratio for his transformation of horizontal velocity to vertical velocity was the greatest (75.25%) among the three. Last, the maximum CM height of T. Barry was the greatest, and his foot contact duration was the longest.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.469-475
• /
• 2017

Workers in industrial fields are highly exposed to accidents or injuries caused by long working hours. An exoskeleton that is able to support the arm muscles of the worker and thereby reduce the probability of an accident and enhance working efficiency could be a solution to this problem. However, existing exoskeletons demand the use of high-priced sensors and motors, which makes them difficult to use in industrial fields. To solve this problem, we developed an arm assisting exoskeleton that consists only of mechanical components without any electronic sensors or motors. The exoskeleton follows the movement of the human arm by shoulder joint and ankle joint. In addition, counterbalance mechanisms are installed on the exoskeleton to support arm strength. The experimental validation of the exoskeleton was conducted using an EMG sensor, confirming the performance of the exoskeleton.