Abstract
The purpose of this study is to examine the ergonomic working uniform. Developing a prototype uniform will be the first stage in aiming to create a working uniform in the construction field. This study was conducted using a questionnaire in the construction field of Daegu city, and the data was gathered from 121 questionnaires. Some of the questions that were asked, were about the case of putting on and removing the uniform and if any areas of uniform caused discomfort. The areas of the uniform that caused problems were the waist, knee, shoulder, arm and neck regions. The free range of movement of these regions were restricted and caused the person to feel cramped. The results of the questionnaire called for improvements to the knee, waist, shoulder and crotch area. The prototype that was developed offered more range of movement in the knee and crotch area, while not causing the uniform to be cramped too much during motion. The prototype also improved comfort by raising the waist line of back part, and by having the ability of the uniform to be tightened or loosened with zipper according to the persons preference. The upper area of the uniform was improved by dropping the shoulder seam line which enhanced comfort and also allowed a better fit for the elbow and wrist. The prototypes additional feature included a slit zipper in the sides of the trousers and a gusset in the under arm area to improve breathability and sweat elimination.
