• KCID journal
• /
• v.13 no.1
• /
• pp.82-90
• /
• 2006

The practical date of rice growing stages and the date for calculating the water demand in paddy field have differences. The causes are rice planting water requirement, nursery bed area and change of average temperature and so on. Some recent papers have shown the same results. So we have investigated the nursery period, rice transplanting period and mid-summer drainage and developed a system for estimating water demand. And we calculated the water demand by using the system. The result showed that calculation by using the new system is more appropriate than the calculation by using the established period. But because water losses in canals and crop coefficient are not determined appropriately, we can calculate the agricultural water demand more accurately by dstablishing canal losses ratio, crop coefficient and so on.

• Nuclear Engineering and Technology
• /
• v.49 no.5
• /
• pp.920-927
• /
• 2017

With ever-advancing computer technology, the Monte Carlo (MC) neutron transport calculation is expanding its application area to nuclear reactor transient analysis. Dynamic MC (DMC) neutron tracking for transient analysis requires efficient algorithms for delayed neutron generation, neutron population control, and initial condition modeling. In this paper, a new MC steady-state simulation method based on time-dependent MC neutron tracking is proposed for steady-state initial condition modeling; during this process, prompt neutron sources and delayed neutron precursors for the DMC transient simulation can easily be sampled. The DMC method, including the proposed time-dependent DMC steady-state simulation method, has been implemented in McCARD and applied for two-dimensional core kinetics problems in the time-dependent neutron transport benchmark C5G7-TD. The McCARD DMC calculation results show good agreement with results of a deterministic transport analysis code, nTRACER.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.251-254
• /
• 2003

A voltage stability assessment consists of the contingency screening, voltage stability analysis, and counter measures. A widely used index for the voltage stability assessment of power system is the reactive power margin. It shows some factors of voluntariness as following the status of power system and load levels for the target analyzing area. Therefore, it has a demerit that the absolute amounts of reactive power margin is not to be applied by the quantized margin criterion. This paper selects a vulnerable area by assigning the voltage instability for the particular contingency for the selection of vulnerable area in the respect of the investigation of reactive power margin or VQVI as an index of V-Q margin sensitivity in order to overcome the demerit. This will be able to grasp the V-Q margin sensitivity for the target analyzing area by presenting the ratio of power margin between the margin before and after contingency as following the calculation of reactive power margin. The presented method is applied to the voltage stability assessment for the Metropolitan area of 2003 KEPCO summer peak system.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.8
• /
• pp.388-393
• /
• 2014

Energy consumption unit in a building is classified according to uses of electricity, gas, and oil, and it has been studied steadily as a material for establishing policy standards for energy saving in buildings. Meanwhile, consumption unit in apartment house can be calculated differently according to its survey method and area standard. Therefore, with the necessity of reestablishing energy consumption unit, this study has researched thermal energy consumption, Supply dwelling area Exclusive dwelling area, completion year and housing type of 23,791 households of 31 complex in Daejeon. As a result, (1) there was about 20% difference between supply and exclusive dwelling areas. (2) On the basis of exclusive dwelling area, thermal energy consumption unit was calculated as $104.9kWh/m^2{\cdot}a$ in 2010, $104.6kWh/m^2{\cdot}a$ in 2011, and $107.7kWh/m^2{\cdot}a$ in 2012.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.4
• /
• pp.175-182
• /
• 2023

The purpose of this study, the trend of renewable energy, domestic and foreign renewable energy policies, and the flow of the legal system related to renewable energy location were identified, and a location analysis using public data was studied when solar energy was located. First, renewable energy is leading to energy conversion by reducing the proportion of existing fossil fuel-centered energy sources in the global trend and increasing the proportion of renewable energy, an eco-friendly energy source, and changing the institutional and market structure. Second, large-scale solar energy power plants are installed and operated in rural areas where there is no change in insolation and land prices are cheaper than in urban areas where there are many changes in insolation due to surrounding high-rise buildings and street trees. Third, if a preliminary location review is conducted using public data at this time, it will be easy to identify the optimal location for area and size calculation. Fourth, the solar energy location functional area was studied in area A, and the total area of the target area was 624.5km², with 392.7km² and 62.9% of the avoidance area where solar power cannot be located.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.8 no.6
• /
• pp.85-90
• /
• 1998

The most important step image processing is stereo matching process. That is finding pixels of 3 dimensional pair in the left and right image. There are two matching methods. One is an area based approach and the other is a feature based approach. An area based approach needs much calculation time. In the other hand, we have the advantage of calculation time in the feature based approach, but can not obtain matched data for all pixels in the image. In recent years, fuzzy image processing methods are developed to manage vagueness and noise in image and ambiguous, inconsistent knowledge in recognition step. In this paper, we propose a fuzzy stereo matching algorithm. This method converts brightness data of image to fuzzy membership value and processes an area based approach method for stereo matching algorithm. We experiment with some stereo images to validate effectiveness of this algorithm.

• Journal of Navigation and Port Research
• /
• v.33 no.6
• /
• pp.457-462
• /
• 2009

In this paper we suggest optimal positioning algorithm for DER(distributed energy resource)s near ocean side by using Newton-Rhapson load flow calculation. By installing DERs within urban area, electric power can be effectively transmitted to each loads without constructing additional large scale power stations and transmission lines. Therefore, DERs have attracted worldwide attention as urban area energy sources. However, there are quite a few studies for estimation of power loss due to DERs' location change within urban area Hence, in this study, an optimal positioning scheme for DERs is proposed in order to minimizing electrical power loss.

• Journal of Korean Society of Rural Planning
• /
• v.12 no.4 s.33
• /
• pp.83-88
• /
• 2006

Recently, management and restoration efforts using the plants promote the disturbed habitats such as a set-asides or field boundaries. But, side effects are coming out because of using the exotic plants in restoration process. This study was conducted to select the native plant species used for restoration through the vegetation survey and plant community analysis at small stream-side in rural villages. We surveyed at two small stream-sides in open field and high land area in 2005 as a case study. Total 126 species was found at small stream side in open field area. As the result of important value' calculation, Persicaria thunbergii 23.0%, Humulus japonicus 18.6%, Phragmites communis 4.4%, Bromus japonicus 4.2%, and Rosa multiflora 3.4% were in the order of important value. Total 92 species were found at small stream side in high land area. As the result of important value' calculation, Dactylis glomerata 16.1%, Artemisia princeps var. orientalis 11.0%, Persicaria thunbergii 10.9%, Humulus japonicus 9.3%, Phragmites japonica 5.2% and Phragmites communis 3.5% were in the order of important value. We selected some plant species to use in restoration after due consideration of problems of exotic plant and high coverage and density species, and ecological process; Persicaria thunberii, Phragmites communis, Bromus japonicus, Rosa multiflora, Equisetum arvense, Digtaria sanguinalis, Impatiens textori, and Artemisia princeps var. orientalis in open field stream-side, and Artemisia princeps var. orientalis, Persicaria thunbergii, Phragmites japonica, Phragmites communis, Artemisia selengensis, Panicum bisulcatum, Rorippa indica, and Equisetum arvense at hghland stream-side. We will verify the selected native plants and plan the utilization of the native plants in restoration at stream-side in rural village.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.03a
• /
• pp.775-780
• /
• 2008

This paper reports on the internal flow of a centrifugal mini pump working at the low flow rate operating conditions. The RNG $\kappa-\varepsilon$ turbulence model was employed to simulate the three-dimensional turbulent flow in the pump. To examine and certify the simulation results, a transparent acrylic centrifugal mini pump model which is suitable for PIV measurement has been developed. The tongue region and the passages region between blades were investigated using PIV. In order to eliminate the effect of refraction on the area closed to the wall and increase the measurement accuracy, the fluorescent particles were scatted into the working fluid with the tracing particles. It is found from the calculation and PIV measurement results that there is a large area of recirculation flow near the tongue at low flow rate operating conditions. The computationally predicted water head using the $\kappa-\varepsilon$ turbulence model at low flow rate operating conditions are in very good agreement with the experimentally measured water head and the mean velocity distributions at investigation area obtained by PIV and calculation showed a satisfactory agreement as well. Meanwhile, the results of PIV measurements show that the flow status in one passage is different to another. And for capturing the internal flow detail information, the $\kappa-\varepsilon$ turbulence model is not very suitable.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2003.10a
• /
• pp.27-31
• /
• 2003

It can be classified in various methods to get the geoidal heights. It can be achieved geometric geoidal heights if we do GPS surveying in leveling point. The aims of this paper are calculation of geometric geoidal heights using GPS/leveling data in study area and evaluation of the global and local geoid models in and around Korean peninsula. For this study, study area was selected in the leveling line from Kunsan to Chonju city and GPS surveying was accomplished in the leveling line. And, also spherical harmonic analysis was made on the three global geopotential models, OSU91A, EGM96, EGM96m under same condition and KOGD2002, Korean gravimetric geoid model was made in this study The results shows that EGM96m is the best model because the differences between geoidal heights of EGM96m and geometric geoidal heights of GPS/Leveling data appear the smallest value among them.