• Korean Journal of Digital Imaging in Medicine
• /
• v.5 no.1
• /
• pp.32-44
• /
• 2002

The role of radiology department has been greatly increased in the past few years as the technology in the medical imaging devices improved and the introduction of PACS (Picture Archiving and Communications System) to the conventional film-based diagnostic structure is a truly remarkable factor to the medical history. In addition, the value of using digital information in medical imaging is highly expected to grow as the technology over the computer and the network improves. However, the current medical practice, using PACS is somewhat limited compared to the film-based conventional one due to a poor image quality. The image quality is the most important and inevitable factor in the PACS environment and it is one of the most necessary steps to more wide practice of digital imaging. The existing image quality control tools are limited in controlling images produced from the medical modalities, because they cannot display the real image changing status. Thus, the image quality is distorted and the ability to diagnosis becomes hindered compared to the one of the film-based practice. In addition, the workflow of the radiologist greatly increases; as every doctor has to perform his or her own image quality control every time they view images produced from the medical modalities. To resolve these kinds of problems and enhance current medical practice under the PACS environment, we have developed a program to display a better image quality by using the ROI optical density of the existing gray level values. When the LUT is used properly, small detailed regions, which cannot be seen by using the existing image quality controls are easily displayed and thus, greatly improves digital medical practice. The purpose of this study is to provide an easier medical practice to physicians, by applying the technology of converting the H-D curves of the analog film screen to the digital imaging technology and to preset image quality control values to each exposed body part, modality and group of physicians for a better and easier medical practice. We have asked to 5 well known professional physicians to compare image quality of the same set of exam by using the two different methods: existing image quality control and the LUT technology. As the result, the LUT technology was enormously favored over the existing image quality control method. All the physicians have pointed out the far more superiority of the LUT over the existing image quality control method and highly praised its ability to display small detailed regions, which cannot be displayed by existing image quality control tools. Two physicians expressed the necessity of presetting the LUT values for each exposed body part. Overall, the LUT technology yielded a great interest among the physicians and highly praised for its ability to overcome currently embedded problems of PACS. We strongly believe that the LUT technology can enhance the current medical practice and open a new beginning in the future medical imaging.

• Journal of radiological science and technology
• /
• v.25 no.2
• /
• pp.57-64
• /
• 2002

The recent development of embodiment technology of the medical images makes most medical institutions introduce PACS(Picture Archiving and Communication System) in haste. However lots of PACS solutions, currently developed and distributed, haven't been able to serve the convenience of users and to satisfy user's demand because of economic limitations and administrator-oriented considerations in the process of development. So we have developed MIH(Medical Image History), by which we can search and refer to the patient's medical images and information with few restrictions of time and space for diagnosis and treatment. This program will contribute to the improvement in the medical environment and meet the clients' need. We'll make more effort to develop the application which insures the better quality of medical images. MIH manages the patient's image files and medical records like film chart in connection with time. This trial will contribute to the reduction of the economical loss caused by unnecessary references and improve the quality in the medical services. The demand on the development or the program which refers to the medical +ata quickly and keeps them stable will be continued by the medical institute. This will satisfy the client's demand and improve the service to the patients in that tile program will be modified from the standpoint of the users. MIH is trying to keep user-oriented policy and to apply the benefit of the analog system to the digital environment. It is necessary to lead the public to the better understanding that the systematic management and referring of the medical images is as important as the quality of the images.

• Journal of the Korean Society of Radiology
• /
• v.10 no.3
• /
• pp.161-169
• /
• 2016

In this study, the proposal to seek ways to reduce the amount of radiation is drawn by comparing and analyzing CT Dose Index(CTDI) on the pediatric head CT which was performed at the busan regional hospitals, to the national diagnostic reference levels. As a result, it was appeared to exceed the amount of the dose recommendation in order of hospital, general hospital and senior general hospital in the hospital-specific classification and from 2 to 5 year, from 1 month to 1 year and from 6 to 10 year in the age-specific classification. In addition, the amount of the dose recommendation was exceed in order of helical, axial and volume in the scan-specific classification. As the results of the scan range reset to match the diagnostic reference level, the dose reduction showed 11.68%, 15.79% and 20.66% in senior general hospital, general hospital and hospital respectively. In the results of analysing patient average scan ranges which does not deviate from the guideline of patient dose recommendation, there was age of 1 month to 1 year, 2 to 5 year and 6 to 10 year of $03.2{\pm}11.8mm$, $110.5{\pm}14.5mm$, and $117.8{\pm}17.2mm$ respectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.3
• /
• pp.133-144
• /
• 2017

Recently, weather information is getting closer to our real life, and it is a very important factor especially in the transportation field. Although the damage caused by the abnormal climate changes around the world has been gradually increased and the correlation between the road risk and the possibility of traffic accidents is very high, the domestic research has been performed at the level of basic research. The Purpose of this study is to develop a risk map for the road hazard forecasting service of weather situation by linking real - time weather information and traffic information based on accident analysis data by weather factors. So, we have developed a collection and analysis about related data, processing, applying prediction models in various weather conditions and a method to provide the road hazard map for national highways and provincial roads on a web map. As a result, the road hazard map proposed in this study can be expected to be useful for road managers and users through online and mobile services in the future. In addition, information that can support safe autonomous driving by continuously archiving and providing a risk map database so as to anticipate and preemptively prepare for the risk due to meteorological factors in the autonomous driving vehicle, which is a key factor of the 4th Industrial Revolution, and this map can be expected to be fully utilized.

• Journal of Korean Neurosurgical Society
• /
• v.60 no.5
• /
• pp.604-609
• /
• 2017

Objective : An adjustable Ghajar guide is presented to improve the accuracy of the original Ghajar guide technique. The accuracy of the adjustable Ghajar guide technique is also investigated. Methods : The coronal adjustment angle from the orthogonal catheter trajectory at Kocher's point is determined based on coronal head images using an electronic picture archiving and communication system. For the adjustable Ghajar guide, a protractor is mounted on a C-shaped basal plate that is placed in contact with the margin of a burrhole, keeping the central $0^{\circ}$ line of the protractor orthogonal to the calvarial surface. A catheter guide, which is moved along the protractor and fixed at the pre-determined adjustment angle, is then used to guide the ventricular catheter into the frontal horn adjacent to the foramen of Monro. The adjustable Ghajar guide technique was applied to 20 patients, while a freehand technique based on the surface anatomy of the head was applied to another 47 patients. The accuracy of the ventricular catheter placement was then evaluated using postoperative computed tomography scans. Results : For the adjustable Ghajar guide technique (AGT) patients, the bicaudate index ranged from 0.23 to 0.33 ($mean{\pm}standard$ deviation [SD] : $0.27{\pm}0.03$) and the adjustment angle ranged from $0^{\circ}$ to $10^{\circ}$ ($mean{\pm}SD:5.2^{\circ}{\pm}3.2^{\circ}$). All the AGT patients experienced successful cerebrospinal fluid diversion with only one pass of the catheter. Optimal placement of the ventricular catheter in the ipsilateral frontal horn approximating the foramen of Monro (grade 1) was achieved in 19 patients (95.0%), while a suboptimal trajectory into a lateral corner of the frontal horn passing along a lateral wall of the frontal horn (grade 3) occurred in 1 patient (5.0%). Thus, the AGT patients experienced a significantly higher incidence of optimal catheter placement than the freehand catheterized patients (95.0% vs. 68.3%, p=0.024). Moreover, none of the AGT patients experienced any tract hemorrhages along the catheter or procedure-related complications. Conclusion : The proposed adjustable Ghajar guide technique, using angular adjustment in the coronal plane from the orthogonal trajectory at Kocher's point, facilitates accurate freehand placement of a ventricular catheter for hydrocephalic patients.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.1-14
• /
• 2012

Traffic management centers (TMC) collect real-time traffic data from the field and have powerful databases for analysing, recording, and archiving the data. Recent advanced sensor and communication technologies have been widely applied to intelligent transportation systems (ITS). Regarding sensors, various in-vehicle sensors, in addition to global positioning system (GPS) receiver, are capable of providing high resolution data representing vehicle maneuverings. Regarding communication technologies, advanced wireless communication technologies including vehicle-to-vehicle (V2V) and vehicle-to-vehicle infrastructure (V2I), which are generally referred to as V2X, have been widely used for traffic information and operations (references). The V2X environment considers the transportation system as a network in which each element, such as the vehicles, infrastructure, and drivers, communicates and reacts systematically to acquire information without any time and/or place restrictions. This study is motivated by needs of exploiting aforementioned cutting-edge technologies for developing smarter transportation services. The proposed system has been implemented in the field and discussed in this study. The proposed system is expected to be used effectively to support the development of various traffic information control strategies for the purpose of enhancing traffic safety on highways.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.9 no.10
• /
• pp.753-762
• /
• 2019

It is very important to use the raw material in a particular field of research or education. Research without raw materials are difficult to prove and often remain hypothesis. The use of the raw material is also important in area studies that study specific areas. However, research of area studies, especially Western history, raw material and historical archives are very important data, but it is difficult to obtain and refer to these data due to physical or spatial constraints. In order to solve this problem, there is a method of collecting and providing historical archives, but it is currently difficult to find a case of providing overseas historical archives as a web system in Korea. Accordingly, in this paper proposes the necessity of collecting historical archives, the method of collection, and the method of digital archiving of collected data structurally and systematically. In this regard, investigate the existing research cases on the archive system and database design, and it description the differentiation between the existing systems and the modeling method proposed in this study. Also, to improve the efficiency of the search, it proposes a method of adding a tag table when database modeling.

• Journal of the Korean Society of Radiology
• /
• v.13 no.2
• /
• pp.153-158
• /
• 2019

The purpose of this study is to compare and analyse the differences between a customized small finger made by 3D printing technology, a real small finger, and the other made from plaster of an orthotic company. The areas and the volumes of each cross-section were measured by Computer tomography(CT) and a 3D scanner and analysis of variance was performed to find out the differences of each shape. The areas of the point of 15.69mm, Distal Interphalangel Joints, were measured 30 times respectively using the caliper toll function of Picture Archiving Communication System(PASC) program. The volumes were measured by Configure Units of Meshmixer Program. There was no significant difference in the areas between three of them and there was 0.2 mm gap in the volume, which was more than the significance probability. Therefore, the result of this study shows the availability of finger orthoses made by 3D printing technology in the medical field.

• The Korean Journal of Archival Studies
• /
• no.19
• /
• pp.251-291
• /
• 2009

Due to the trend toward computerization of business services in public sector and the push for e-government, the volume of records that are produced in electronic system and the types of records vary as well. Of those types, dataset is attracting everyone's attention because it is rapidly being supplied. Even though the administrative information system stipulated as an electronic record production system is increasing in number, as it is in blind spot for records management, the system can be superannuated or the records can be lost in case new system is developed. In addition, the system was designed not considering records management, it is managed in an unsatisfactory state because of not meeting the features and quality requirements as records management system. In the advanced countries, they recognized the importance of dataset and then managed the archives for dataset and carried out the project on management systems and a preservation formats for keeping data. Korea also is carrying out the researches on an dataset and individual administrative information systems, but the official scheme has not been established yet. In this study the items for managing archives which should be reflected when the administrative information system is designed was offered in two respects - an identification method and a quality requirement. The major directions for this system are as follows. First, as the dataset is a kind of an electronic record, it is necessary to reflect this factor from the design step prior to production. Second, the system should be established integrating the strategy for records management to the information strategy for the whole organization. In this study, based on such two directions the strategies to establish the identification for dataset in a frame to push e-government were suggested. The problem on the archiving steps including preservation format and the management procedures in dataset archive does not included in the research contents. In line with this, more researches on those contents as well as a variety of researches on dataset are expected to be more actively conducted.

• The Korean Journal of Archival Studies
• /
• no.57
• /
• pp.165-234
• /
• 2018

Archival symposium was a time when men thought thoroughly about what archives were, and to carefully record such thoughts. In the time of archival symposium, I observed the people archiving. To bring out a thought for a man was a physical action that moves his own desire, language, emotion and senses simultaneously. In philosophy thought is not merely a logical and cognitive act. Thought is a physical act that includes logical thinking, feeling, emotion, will, and on. When there is a emotional change in the body, an idea about that change forms. Emotional change acts as a force that increases, decreases, accelerate and hinder the body's abilities. However, there were no suggestions for philosophical concepts from the start. Love is not taught by someone. At some point without oneself knowing we start love and really experience with our bodies what love is, and in this repeat love and undergo all these emotions. Would not the overall story of life be as such. It is different from building a car in a factory. When the archival symposium starts, we asked you to think about what archives are, and to record with such thoughts as reference. Archival symposium is still a proper noun. With the wish for it to become a general term, I report on the process and meaning of archival experiment that is the archival symposium.