• Journal of the Korea Concrete Institute
• /
• v.22 no.3
• /
• pp.297-303
• /
• 2010

The current encased-concrete deep corrugated steel plate has an arch type plate structure, which is a compressive strength-dominant structure that has a small moment due to its arch shape. Therefore, it increases the strength against compression by adding reinforcements to make concrete-filling spaces for increasing the compressive strength and forming cross sections that contain reinforced concrete. In this study, the safety factor of the new-concept encased-concrete bridge plate member was evaluated by comparing the compressive strength obtained from the compressive tests, flexural tests and the design compressive strength determined by using the Canadian Highway Bridge Design Code (CHBDC, 2003), which is a design standard for the encased-concrete bridge plate structures. The results of the safety factor evaluation using the design compressive strength and the test results showed that the safety factor was well above the appropriate value 2.0, which could be adjudged very conservative. If the safety factor based on this study results is considered and applied to the design, economical construction will be possible due to the reduced cross section and construction cost.

• Korean Journal of Cleft Lip And Palate
• /
• v.2 no.1_2
• /
• pp.5-14
• /
• 1999

The aim of treatment of cleft lip and palate is to correct the cleft and associated problems surgically and thus hide the anomaly so that patients can lead normal lives. This correction involves surgically producing a face that does not attract attention, a vocal apparatus that permits intelligible speech, and a dentition that allows optimal function and esthetics. In neonatal periods, gross distortion of tissues surrounding the cleft requires considerable effort and time due to post operative functional defect and scarring and induces milk feeding problem, malocclusion of deciduous or permanent dentition, congenital missing teeth, skeletal dysplasia. The occurrence of a cleft deformity is a source of considerable shock to the parents of an afflicted baby, and the most appropriate approach is very important things. Thus we tried to analysis of dental arch, shape and size of deformity in cleft patients. The results were obtained as follows. 1. When the cast measurements of UCLP subjects at first visit it was found that the mean length was 9.29mm at the alveolar cleft width, also that was 11.7mm at the anterior width and 14mm at the posterior cleft width. 2. Comparison of UCLP group at first visit and just lip surgery, it was found that the older group showed a insignificant reduction in the width of the cleft in the alveolar, canine, and tuberosity regions. 3. The maxillary casts of the UCLP group at 6 months differ Significantly from those of the at 3 months in both length and width. but there was no statistical difference except anterior ridge length of nonclefted site. 4. Comparison at 6 months and 18 months, there was a greater change in length of the alveolar cleft width, intercanine width, and anterior cleft width. Maxillary arch became wider at both the canine region and intertuberosity region. also posterior anteroposterior length was increased but anterior AP length was decreased from 8.1mm to 7.7mm. There was meaningful increase at intertuberosity length; however, a significant reduction in width t-t'

• Journal of Korean Association for Spatial Structures
• /
• v.8 no.5
• /
• pp.47-58
• /
• 2008

Spatial structure is an appropriate shape that resists external force only with in-plane force by reducing the influence of bending moment, and it maximizes the effectiveness of structural system. With this character of the spatial structure, generally long span is used. As a result, large deflection is accompanied from the general frame. the structure is apt to result in a large deflection even though this structure experiences a small displacement in absence. Usually, nonlinear analysis in numerical analysis means geometric nonlinearity and material nonlinearity and complex nonlinearity analysis considers both of them. In this study, nonlinear equation of equilibrium considering geometric nonlinearity as per finite element method was applied and also considered the material nonlinearity using the relation of stress-strain in element. It is applied to find unstable result for tracing load-deflection curve in the numerical analysis tech. especially Arc-length method, and result of the analysis was studied by ABAQUS a general purpose of the finite element program. It is found that the present analysis predicts accurate nonlinear behavior of plane and space truss.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.127-133
• /
• 1998

An impacted tooth is defined pathologically as a tooth that remains under the mucosa of inside bone without eruption of the crown after a specific period of eruption. Clinically, the term includes those teeth, even before eruption period, that are not expected to erupt due to shape, position and alignment of tooth and lack of space. Canine is prone to impaction more than other teeth because it has the longest time to develop and a complex route from the place of formation to the site of eruption. The impaction incidence of maxillary canine is repoted 0.92$\sim$3.3% (Ferguson, 1990). In 1995 Orton reported that the incidence was 0.92$\sim$2.2% and palatal impaction was more frequent than labial impaction(85%:15%). In 1969 Johnston presented it was more common to woman than to man(3:1). The etiology includes systemic disease such as endocrine disorder, cleidocranial dysostosis, irradiation, Crouzon syndrome, ricketts, facial hemihypertrophy and hereditary and local problems such as ectopic position of the tooth, distance of tooth from its place of eruption, malformation of the tooth, presence of supernumerary teeth, trauma of tooth germ, infection of tooth germ, displacement of tooth germ or tooth by a neoplasm, ankylosis, overretention of deciduous predecessor, lack of space for the tooth in the dental arch and mucosal barrier due to gingival fibrosis. The maxillary canine is especially important as it has the longest root, provides guidance for lateral movement of the mandible and masticatory function and assumes an important role esthetically as it is located at mouth angle. If left untreated, it may cause migration and external, internal resorption of adjacent teeth, loss of arch length, formation of dentigerous cyst or tumors, infection and referred pain as well as malposition of the tooth. Therefore, periodic examination of the development and eruption of the maxillary canine is especially important in a growing child. This case study presents the results of treatment of palatally impacted maxillary canine utilizing surgical exposure and orthodontic tooth movement on patients visiting SNUDH dept. of pediatric dentistry.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.3
• /
• pp.149-158
• /
• 2013

The purpose of this study was to evaluate the shape and impacted pattern of mesiodens and associated complications using three dimensional images produced by dental CBCT. This study was based on the CBCT (CB Mercury, Hitachi, Tokyo, Japan) radiographic view of 280 pediatric patients who visited the Department of Pediatric Dentistry at the Chosun University Dental Hospital with the chief complain of mesiodens during between 2007 and 2012. Impacted mesiodens occurs more frequently in boys than in girls, the ratio being approximately 3.3:1 and most cases were observed between 6 and 8 years of age. The number of mesiodens per patient was 1.38. Majority of the mesiodens were conical (79.5%) in shape and inverted (48.6%) in direction. The mesio-distal position of mesiodens were the most common in middle sector (81.8%), vertical level were the most common near cervical (60.3%), and labio-palatal position were the most common at palatal side of the dental arch (73.8%). 47.5% of mesiodens had complications and common complications associated with mesiodens were displaced tooth and delayed eruptions. The shape, vertical level, and labio-palatal position of mesiodens had correlations with complications. CBCT appears to be an excellent diagnostic tool, providing three dimensional information and accurate images, for diagnosis of impacted mesiodens.

• Fashion & Textile Research Journal
• /
• v.16 no.6
• /
• pp.935-944
• /
• 2014

This study was about to investigate the characteristics of elementary school students' feet growth, comparing and analyzed the measured values and the index values of 3D scan data. As the results from analyzing the measured values, the all measurement items excluding 'Toe 5 angle' showed some significant differences among the age classes, knowing that the elementary school students' feet were continually grown. Although, the items of length, thickness, width, height and circumference indicate some rapid growth of feet at 11 years old, but it appears slowing growth of 'Foot width' after the age of 11 years old. The angle item didn't show any sequential differences according to ages. As the results from analyzing the index values, the children in higher grades have longer 'Toe 5', thicker ankles, wider and thicker the superior part of feet than the children in lower grades. For the superior and the middle part of feet were lowly raised, their Arch height was low and thick. The inferior part of feet showed narrow width and higher height. Giving that the Medial ball width was wide and the Toe 1 angle is high for the children in higher grades, it is expected that the Metatarsophalangeal I might be more projected than that of children in lower grades. Likewise, knowing that the male students' feet shape was bigger than female students' feet from the result that the male students' index values were higher.

• The korean journal of orthodontics
• /
• v.46 no.1
• /
• pp.3-12
• /
• 2016

Objective: The purpose of this study was to compare the precision of three-dimensional (3D) images acquired using iTero$^{(R)}$(Align Technology Inc., San Jose, CA, USA) and Trios$^{(R)}$(3Shape Dental Systems, Copenhagen, Denmark) digital intraoral scanners, and to evaluate the effects of the severity of tooth irregularities and scanning sequence on precision. Methods: Dental arch models were fabricated with differing degrees of tooth irregularity and divided into 2 groups based on scanning sequence. To assess their precision, images were superimposed and an optimized superimposition algorithm was employed to measure any 3D deviation. The t-test, paired t-test, and one-way ANOVA were performed (p < 0.05) for statistical analysis. Results: The iTero$^{(R)}$ and Trios$^{(R)}$ systems showed no statistically significant difference in precision among models with differing degrees of tooth irregularity. However, there were statistically significant differences in the precision of the 2 scanners when the starting points of scanning were different. The iTero$^{(R)}$ scanner (mean deviation, $29.84{\pm}12.08{\mu}m$) proved to be less precise than the Trios$^{(R)}$ scanner ($22.17{\pm}4.47{\mu}m$). Conclusions: The precision of 3D images differed according to the degree of tooth irregularity, scanning sequence, and scanner type. However, from a clinical standpoint, both scanners were highly accurate regardless of the degree of tooth irregularity.

• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.2
• /
• pp.373-383
• /
• 1996

In order to compare the accuracy of impression method using addition silicone putty impression material, metal master die was fabricated with 4 cylindrical abutments that were similar in shape to mandibular arch. Among the 4 abutments, two(A, D) with 8mm width and 7mm height were formed in the 2nd molar regions and the other two(B, C) with 6mm width and 7mm height were on the canine regions. Impressions were taken using one-step putty wash impression technique and two-step putty wash impression technique by three different types of impression materials(Perfect, Express, Exaflex). Upon measuring the distance between the abutments on the model by three dimensional measuring machine, the percent of devitaion of the materials were obtained, rendering the following results. The results obtained are as follows : 1. There was no significant difference in accuracy in regard with the impression method between one-step putty wash impression technique and two-step putty wash impression technique using addition silicone putty impression material. 2. There were no difference in accuracy among with three different addition silicone putty impression materials. 3. All the distances between abutments on improved stone models increased in comparison with those on the metal master model.

• Journal of the Korean Society of Costume
• /
• v.51 no.4
• /
• pp.71-80
• /
• 2001

Since the beginning of the 90's, Fashion shows appear to be a type of performance form of art combining with other areas to visually entertain the viewers. This can be explained by the modern tendency to escape from society which requires formality and complicated lifestyles. Fashion shows take place in a scene Influenced by the idea of post-modernism which redefines the definition of space. A church, old factory, unoccupied ground, subway stations, or even place like a waste disposal are used as a setting. The stage set is no longer the T shape run way and the procinium arch has disappeared. The gap between audience and stage has diminished and theatrical element is added to the fashion performance by using viewers living and working environments as setting of the show. The human relation with machine based on the cutting edge technology such as the stage automation, robots and mist making sprinkler system introduces new elements with spontaneity and detailed planning in the stage performance. Music also plays an Important role in attracting viewers. The sound track covers house music to techno music. Instead of music being abstract, folks orchestral music, choirs, piano. even live concert performed by pop artist provide the liveliness of the fashion show. And the catwalk itself is a performance. Model needs to be well trained as the capable talent who can handle sensitive gestures, facial expressions, dancing and choreography. The improvisatorial interaction between audience and model lead to audience participation. Models now range from pop star, ordinary people, handicapped people, to elderly and so on. John Galliano introduced the theatrical factors for the fashion show and Alexander Mcqueen approached the fashion show as the visual art of communication. Hussein Chalayan utilized high technology skewing futurism as if in a magic show. Today the Fashion show tends to be a total performance which includes audience participation, impromptu, and that break the limitation that fashion shows previously had. This will lead the fashion industry in opening new horizon of its own.

• Korean Institute of Interior Design Journal
• /
• no.12
• /
• pp.91-99
• /
• 1997

Alvar Aalto has pursued National Romanticism, cultural art movement in scandinavian peninsula, organic concepts of growth and suitability, comprehensive view of nature including a possibility of coexistance of human-being and the nature well harmonized. For instance, his design expressed local features of the nature, human emotions instead of geometical arts and mathematical principles. It is noteworthy today that he built up the identity with satrical architecture vocabularies, different from modern arch-itechtural idiology. The characte-ristics of his design related to interior architecture are collectively as follows; The first, Space discontinuity of the interior and exterior, gradual process by joints which are inclined to collage with many shapes in plan and section of the space and such joints are adjusted by sensual ways and stressed with inner collectivity in his works. The second, He pursued the architectural orderfor modern irreqularity, various changes and sensual harmonies. As result, free curved line, fan shape and irregular modeling were individually expressed by technics of natural features and national characteristics of Finland. The third, Organic synthesis. A harmony through med-ums in its space, materials and space effectiveness relations are made and expressed for mixed design especially harmonized of all the materials he planned, entire harmony with total design, itemized details, materials and furnitures in entire space. The fourth, The interest of the nature based on his sense harmonized with nature made him mainly use native materials, lumbers and red bricks masonry and showed and arranged various interior sky light and grazed in to let natural light in, harmony with garden to sensually cohere to the nature and courtyard, etcetera. His major subject are to direct architectural developments through the nature and human-being in his works. At this point, it is considered that his direction of the locality and independence as a human-being made the concepts of organic space structure possible.