• 한국안전학회지
• /
• 제23권5호
• /
• pp.91-96
• /
• 2008

A reflected breakwater can be affected by wave pressure and power because it is to be concentrated by wave energy. The present study is to estimate hydraulic behavior affecting around a reflected breakwater, which is discontinuity cases and various angle of coner at the breakwater. The numerical model to investigate wave diffraction, which is important hydraulic factor in the ocean, is performed by using direct boundary element method. The present numerical results are compared with the solutions of approximate and absolute based on an eigenfunction, and the solution of analytical by Fresnel integral. The results of the present numerical simulation agreed well with those of the published numerical and analytical data. As a result of this study, wave height is high at the comer of breakwater, and it is to be high if angle of conner at the reflected breakwater is small.

• Structural Engineering and Mechanics
• /
• 제50권4호
• /
• pp.487-500
• /
• 2014

An analytical solution for the nonlinear in-plane free oscillations of the suspended cable which contains the quadratic and cubic nonlinearities is investigated via the homotopy analysis method (HAM). Different from the existing analytical technique, the HAM is indeed independent of the small parameter assumption in the nonlinear vibration equation. The nonlinear equation is established by using the extended Hamilton's principle, which takes into account the effects of the geometric nonlinearity and quasi-static stretching. A non-zero equilibrium position term is introduced due to the quadratic nonlinearity in order to guarantee the rule of the solution expression. Therefore, the mth-order analytic solutions of the corresponding equation are explicitly obtained via the HAM. Numerical results show that the approximate solutions obtained by using the HAM are in good agreement with the numerical integrations (i.e., Runge-Kutta method). Moreover, the HAM provides a simple way to adjust and control the convergent regions of the series solutions by means of an auxiliary parameter. Finally, the effects of initial conditions on the linear and nonlinear frequency ratio are investigated.

• Composites Research
• /
• 제16권5호
• /
• pp.28-38
• /
• 2003

본 연구는 면내 선형분포하중이 작용하는 직교이방성판의 좌굴거동에 관한 것으로서, 하중이 재하된 두 변은 단순지지되어 있으며 하중이 재하되지 않은 두 변은 회전에 대해 탄성구속된 경계조건을 포함하여 다양한 경계조건을 갖는 직교이방성판의 좌굴해석식을 정밀해법을 사용하여 유도하였다. 좌굴해석 수행 결과를 사용하여 하중이 재하되지 않은 두 변이 특정 경계조건인 경우를 포함하여 회전에 대해 탄성구속된 판의 좌굴해석을 위한 근사식을 판의 형상비와 탄성구속 정도를 나타내는 계수 및 재료의 성질의 함수로 제시하였다. 제시된 근사식을 사용할 경우 재료의 성질과 판의 형상비 및 하중이 재하되지 않은 변의 탄성구속정도를 알면 단순계산으로 직교이방성판의 좌굴해석을 수행할 수 있도록 하였다. 여러 가지 직교이방성 재료에 대해 근사식에 의한 해석결과와 정밀해법에 의한 해석결과를 비교한 결과 1.5% 미만의 차를 나타냈었다.

• Structural Engineering and Mechanics
• /
• 제18권3호
• /
• pp.363-376
• /
• 2004

The present study provides a relatively simple and accurate analytical model for the prediction of time-dependent stresses and curvatures of cracked R.C. sections under working loads. A more simplified solution is also provided. The proposed models are demonstrated by considering a numerical example and conducting a parametric study on the effects of relevant R.C. design parameters. In contrary to tension reinforcement, the compression reinforcement is found to contribute significantly in reducing tensile stresses in tension steel and in reducing the total section curvatures. The good accuracy of the proposed approximate solution opens a new vision towards a simple yet accurate model for the prediction of time-dependent effects in R.C. structures.

• 한국자동차공학회논문집
• /
• 제6권2호
• /
• pp.144-154
• /
• 1998

A functionally graded material is a nonhomogeneous material, which is composed of several different materials to maintain structural rigidity and endure high temperature loads. An analytical method is presenter to solve the unsteady heat conduction equation for nonhomogeneous materials. A one-dimensional infinite plate made of functionally graded material is considered. The approximate Green's function solution is derived and to be used to obtain the temperature distribution them the stress distributions may be obtained. The volume fraction, the porosity, the stress difference, and the stress ratio are the design parameters and are to be used to set up a systematic design procedure.

• Smart Structures and Systems
• /
• 제15권5호
• /
• pp.1311-1327
• /
• 2015

In this paper, we have applied a new class of approximate analytical methods called Variational Approach (VA) for high nonlinear vibration equations. Three examples have been introduced and discussed. The effects of important parameters on the response of the problems have been considered. Runge-Kutta's algorithm has been used to prepare numerical solutions. The results of variational approach are compared with energy balance method and numerical and exact solutions. It has been established that the method is an easy mathematical tool for solving conservative nonlinear problems. The method doesn't need small perturbation and with only one iteration achieve us to a high accurate solution.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권1호
• /
• pp.132-150
• /
• 2014

In this study, the inertial properties of fully filled liquid in a tank were studied based on the potential theory. The analytic solution was obtained for the rectangular tank, and the numerical solutions using Green's 2nd identity were obtained for other shapes. The inertia of liquid behaves like solid in recti-linear acceleration. But under rotational acceleration, the moment of inertia of liquid becomes small compared to that of solid. The shapes of tank investigated in this study were ellipse, rectangle, hexagon, and octagon with various aspect ratios. The numerical solutions were compared with analytic solution, and an ad hoc semi-analytical approximate formula is proposed herein and this formula gives very good predictions for the moment of inertia of the liquid in a tank of several different geometrical shapes. The results of this study will be useful in analyzing of the motion of LNG/LPG tanker, liquid cargo ship, and damaged ship.

• Bulletin of the Korean Chemical Society
• /
• 제17권2호
• /
• pp.188-192
• /
• 1996

It is shown that the inversion of the undamped Bloch equation for an amplitude-modulated broadband π/2 pulse can be precisely treated as an inverse scattering problem for a Schrodinger equation on the positive semiaxis. The pulse envelope is closely related to the central potential and asymptotically the wave function takes the form of a regular solution of the radial Schrodinger equation for s-wave scattering. An integral equation, which allows the calculation of the pulse amplitude (the potential) from the phase shift of the asymptotic solution, is derived. An exact analytical inversion of the integral equation shows that the detuning-independent π/2 pulse amplitude is given by a delta function. The equation also provides a means to calculate numerically approximate π/2 pulses for broadband excitation.

• 한국정밀공학회지
• /
• 제11권1호
• /
• pp.166-176
• /
• 1994

The problem of reducing the vibration level of elastic plates driven by multiple random point forces is analyzed in this study. First, the analytical solution for the vibration level of finite thin plates with four simply supported edges under the action of multiple random point force is derived. By assuming the plates to be lightly damped, an approximate solution for the vibration level of the plate is obtained. A numerical study is carried out to determine an optimal spacing distance between the multiple point forces in order to produce a relative minimum in the plate's vibration level. The optimal spacing distance is shown to depend on the given excitation band. The effects of wave cancellation in the near field of the multiple point forces are discussed by using the equivalence of certain stationary random responses and deterministic pulse responese.

• Journal of applied mathematics & informatics
• /
• 제41권5호
• /
• pp.947-961
• /
• 2023

This paper summarizes some research findings that show how the differential transform method (DTM) is used to resolve the Holling-Tanner model. To confirm the application, effectiveness, and correctness of the approach, a comparison between the differential transform method (DTM) and the Adomian decomposition method (ADM) is carried out, and an accurate solution representation in truncated series is discovered. The approximate solution obtain using both techniques and comparison demonstrates same outcome which remains a preferred numerical method for resolving a system of nonlinear differential equations.