• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.3
• /
• pp.349-359
• /
• 2016

In order to analytically evaluate buffeting responses, the analysis of wind characteristics such as turbulence intensity, turbulence length, gust, roughness coefficient, etc must be a priority. Static aerodynamic force coefficients, flutter coefficients, structural damping ratios, aerodynamic damping ratios and natural frequencies affect the analytical responses. The bridge interested in this paper has being been used for 32 years. As the time passes, current terrain conditions around the bridge are different markedly from the conditions it was built 32 years ago. Also, wind environments were considerably varied by the climate change. For this reason, it is necessary to evaluate the turbulence intensity, length, spectrum and roughness coefficient of the bridge site from full-scale measurements using the structural health monitoring system. The evaluation results indicate that wind characteristics of bridge site is analogous to that of open terrain although the bridge is located on the coastal area. To calculate buffeting responses, the analysis variables such as damping ratios, static aerodynamic force coefficients and natural frequency were evaluated from measured data. The analysis was performed with regard to 4 cases. The evaluated variables from measured data are applied to the first and second analysis cases. And the other analysis cases were performed based on Design Guidelines for Steel Cable Supported Bridges. The calculated responses of each analysis cases are compared with the buffeting response measured at less than 25m/s wind speed. It is verified that the responses by the numerical analysis applying the estimated variables based on full-scale measurements are well agreed with the measured actual buffeting responses under wind speed 25m/s. Also, the extreme wind speed corresponding to a recurrence interval 200 years is derived from Gumbel distribution. The derived wind speed for return period of 200 years is 45m/s. Therefore the buffeting responses at wind speed 45m/s is determined by the analysis applying the estimated variables.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.117-120
• /
• 1998

The objective of this study is to investigate the possibility for application of E.P-dust as both admixture and fillers for aggregates under various mixproportion, replacing method and the ratios of replacement. According to the experimental results, improvement of viscosity and reducing of segregation at fresh state and gain in strength at hardened state can be achieved by applying E.P-dust. It can be considered from the results that application of E.P-dust will be more efficient as fillers for aggregates than as binder

• Earthquakes and Structures
• /
• v.8 no.6
• /
• pp.1299-1323
• /
• 2015

A model for reflection and refraction of magneto-thermoelastic SV-waves at the interface of two transversely isotropic and homogeneous solid half spaces under initial stress by applying classical dynamical theory of thermoelasticity is purposed. The reflection and refraction coefficients of SV-waves are obtained with ideal boundary conditions for SV-wave incident on the solid-solid interface. The effects of magnetic field, temperature and initial stress on the amplitude ratios after numerical computations are shown graphically with MATLAB software for the particular model.

• Journal of the Korean Society of Safety
• /
• v.4 no.1
• /
• pp.47-58
• /
• 1989

This paper treats the vibration analysis of a simply supported rectangular plate stiffened with viscoelastic beams. The effect of viscoelastic beams on the vibration of the plate is analyzed by using Dirac delta function and the equation of motion can be expressed only one equation. The frequency equation is obtained by applying Laplace transformation. The effect of volumes, numben and aspect ratios of beam on the frequency of the plate is analyzed.

• Journal of Korea Water Resources Association
• /
• v.38 no.12 s.161
• /
• pp.1009-1020
• /
• 2005

In this paper, impervious area ratios for 11 land cover types of Seoul city were estimated and corresponding CNs were calculated. And linear regression equations were derived to predict impervious area ratios based on five major urban land cover types including the residential, industrial, transportation, commercial, and commercial-residential mixed areas. From the comparative analysis of impervious area ratios for the US SCS CNs and the CNs derived in this study for Seoul city, it is revealed that residential areas show the biggest difference followed by industrial and commercial ones. And in turn, these increased impervious area ratios resulted in Increased CNs for Seoul city including increases by 13 for residential, 12 for industrial and 5 for commercial areas. Therefore, it is suggested that applying the US SCS CNs to Korean urbanized areas may underestimate the flood runoff potential.

• Journal of ILASS-Korea
• /
• v.24 no.1
• /
• pp.35-42
• /
• 2019

Syngas is widely produced by incomplete combustion of coal, water vapor, and air (oxygen) in a high-temperature/high-pressure gasifier through a coal-gasification process for power generation. In this study, a simulation syngas which was mainly composed of $H_2$, CO, $CO_2$, and $N_2$ was fueled with diesel. A modified single cylinder compression ignition (CI) engine is equipped with intake port syngas supply system and mechanical diesel direct injection system for dual fuel combustion. Combustion and emission characteristics of the engine were investigated by applying various syngas composition ratios and compression ratios. Diesel fuel injection timing was optimized to increase indicated thermal efficiency (ITE) at the engine speed 1,800 rpm and part load net indicated mean effective pressure ($IMEP_{net}$) 2 to 5 bar. ITE of the engine increased with the $H_2$ concentration, compression ratio and engine load. With 45% of $H_2$ concentration, compression ratio 17.1 and $IMEP_{net}$ 5 bar, ITE of 41.5% was achieved, which is equivalent to that of only diesel fuel operation.

• Journal of The Korean Astronomical Society
• /
• v.30 no.1
• /
• pp.13-25
• /
• 1997

Sobolev approximation can be adopted to a macroscopic supersonic motion comparatively larger than a random (thermal) one. It has recently been applied not only to the winds of hot early type stars, but also to envelopes of late type giants and/or supergiants. However, since the ratio of wind velocity to stochastic one is comparatively small in the winds of these stars, the condition for applying the Sobolev approximation is not fulfilled any more. Therefore the validity of the Sobolev approximation must be checked. We have calculated exact P Cygni profiles with various velocity ratios, $V_\infty/V_{sto}$, using the accelerated lambda iteration method, comparing with those obtained by the Sobolev approximation. While the velocity ratio decrease, serious deviations have been occured over the whole line profile. When the gradual increase in the velocity structure happens near the surface of star, the amount of deviations become more serious even at the high velocity ratios. The investigations have been applied to observed UV line profile of CIV in the Copernicus spectrums $of\;\zeta\;Puppis\;and\;NV\;of\;\tau\;Sco$. In case of $\tau$ Sco which has an expanding envelope with the gradual velocity increase in the inner region, The Sobolev approximation has given the serious deviations in the line profiles.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.2
• /
• pp.42-49
• /
• 2011

To expand lean misfire limit and improve combustion stability, the effects of port masking were estimated to secure basic data for applying the mechanism to SI engine instead of asymmetrical port and port throttling devises. For this purpose, various shapes and ratios of masking plates were mounted between port and manifold. The masking effects were evaluated by mixture response test under various load and speed conditions. The results showed that lean misfire limits were expended and fast combustion was observed for all masking shapes and ratios, especially, the effect of diagonal 1/4 masking was remarkable. In conclusion, the port masking method could be easily applied to engine without redesign of port for improving part load performance.

• Transactions of Materials Processing
• /
• v.4 no.3
• /
• pp.214-221
• /
• 1995

In the paper, we have proposed a new method to determine the initial billet for the forged products using a function approximation in the neural network. The architecture of neural network is a three-layer neural network and the back propagation algorithm is employed to train the network. By utilizing the ability of function approximation of a neural network, an optimal billet is determined by applying the nonlinear mathematical relationship between the aspect ratios in the initial billet and the final products. The amount of incomplete filling in the die is measured by the rigid-plastic finite element method. The neural network is trained with the initial billet aspect ratios and those of the unfilled volumes. After learning, the system is able to predict the filling regions which are exactly the same or slightly different to the results of finite element simulation. This new method is applied to find the optimal billet size for the plane strain rib-web product in cold forging. This would reduce the number of finite element simulation for determining the optimal billet size of forging product, further it is usefully adapted to physical modeling for the forging design.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.11
• /
• pp.24-34
• /
• 2019

An automotive automatic transmission is a popular power-transmitting device in passenger vehicles, as it provides various speed ratios for diverse driving conditions with easy manipulation and smooth gear shifting. The transmission is mainly composed of input and output shafts, planetary gear sets, brakes/clutches, and housing, and it yields multiple forward gears and one reverse gear by actuating the shifting devices of the brakes and clutches. In developing a new transmission, kinematic configurations of a transmission, which presents a brief structure and actuation schemes for speed ratios, need to be checked to determine if the structure can be assembled in a layout. It is impossible for a transmission concept having any interference in connecting main components to be developed further in the design process, since connection interference leads to failure of a layout design in the 2-D plane. In this research, an analysis of the assemblability of a front-wheel drive automatic transmission is carried out on an example concept design by applying the vertex addition algorithm based on graph theory.