• Journal of Powder Materials
• /
• v.14 no.6
• /
• pp.362-366
• /
• 2007

Magnesium and magnesium alloys are promising materials for light weight and high strength applications. In order to obtain homogeneous and high quality products in powder compaction and powder forging processes, it is very important to control density and density distributions in powder compacts. In this study, a model for densification of metallic powder is proposed for pure magnesium. The mode] considers the effect of powder characteristics using a pressure-dependent critical density yield criterion. Also with the new model, it was possible to obtain reasonable physical properties of pure magnesium powder using cold iso-state pressing. The proposed densification model was implemented into the finite element method code. The finite element analysis was applied to simulating die compaction of pure magnesium powders in order to investigate the density and effective strain distributions at room temperature.

• Steel and Composite Structures
• /
• v.2 no.6
• /
• pp.441-460
• /
• 2002

In the design of bridges, it is important to consider the thermal stresses induced by the non-linear temperature distribution as well as the variation of effective temperature in the bridge deck. To cope with this, design temperature profiles are provided by design codes, which are normally based on extensive research work. This paper presents the results of a comprehensive investigation on the thermal behaviour of bridges in Hong Kong with special emphasis on composite bridges. The temperature distribution in bridges depends primarily on the solar radiation, ambient air temperature and wind speed in the vicinity. Apart from data of the meteorological factors, good estimates of the thermal properties of material and the film coefficients are necessary for the prediction of temperature distribution. The design temperature profiles for various types of composite bridge deck with bituminous surfacing and concrete slab of different thicknesses are proposed. The factors affecting the design effective temperature are also reviewed and suitable values for Hong Kong are proposed. Results are compared with recommendations of the current local code. The method facilitates the development of site-specific temperature profiles for code documents, and it can also be applied to create zoning maps for temperature loading for large countries where there are great climatic differences.

• Structural Engineering and Mechanics
• /
• v.22 no.4
• /
• pp.483-510
• /
• 2006

The dynamic instability characteristics of laminated composite stiffened shell panels subjected to in-plane harmonic edge loading are investigated in this paper. The eight-noded isoparametric degenerated shell element and a compatible three-noded curved beam element are used to model the shell panels and the stiffeners respectively. As the usual formulation of degenerated beam element is found to overestimate the torsional rigidity, an attempt has been made to reformulate it in an efficient manner. Moreover the new formulation for the beam element requires five degrees of freedom per node as that of shell element. The method of Hill's infinite determinant is applied to analyze the dynamic instability regions. Numerical results are presented to demonstrate the effects of various parameters like shell geometry, lamination scheme, stiffening scheme, static and dynamic load factors and boundary conditions, on the dynamic instability behaviour of laminated composite stiffened panels subjected to in-plane harmonic loads along the boundaries. The results of free vibration and buckling of the laminated composite stiffened curved panels are also presented.

• Steel and Composite Structures
• /
• v.19 no.3
• /
• pp.601-614
• /
• 2015

The Metal Magnetic Memory (MMM) method is a non-destructive testing method based on an analysis of the self-magnetic leakage field distribution on the surface of a component. It is used for determining the stress concentration zones or any irregularities on the surface or inside the components fabricated from ferrous-based materials. Thus, this paper presents the MMM signal behaviour due to the application of fatigue loading. A series of MMM data measurements were performed to obtain the magnetic leakage signal characteristics at the elastic, pre-crack and crack propagation regions that might be caused by residual stresses when cyclic loadings were applied onto the A283 Grade C steel specimens. It was found that the MMM method was able to detect the defects that occurred in the specimens. In addition, a justification of the Self Magnetic Flux Leakage patterns is discussed for demonstrating the effectiveness of this method in assessing the A283 Grade C steel under cyclic loadings.

• Journal of Advanced Marine Engineering and Technology
• /
• v.23 no.5
• /
• pp.702-710
• /
• 1999

U-shaped bellows are usually used to piping system pressure sensor and controller for refriger-ator. Bellows subjected to internal pressure are designed for the purpose of absorbing deformation. Internal pressure on the convolution sidewall and end collar will be applied to an axial load tend-ing to push the collar away from the convolutions. To find out deformation behavior of bellow sub-jected to internal pressure the axisymmetric shell theory using the finite element method is adopted in this paper. U-shaped bellows can be idealized by series of conical frustum-shaped ele-ments because it is axisymmetric shell structure. The displacements of nodal points due to small increment of force are calculated by the finite element method and the calculated nodal displace-ments are added to r-z cylindrical coordinates of nodal points. The new stiffness matrix of the sys-tem using the new coordinates of nodal points is adopted to calculate the another increments of nodal displacement that is the step by step method is used in this paper. The force required to deflect bellows axially is a function of the dimensions of the bellows and the materials from which they are made. Spring constant is analyzed according to the changing geometric factors of U-shaped bellows. The FEM results were agreed with experiment. Using developed FORTRAN PROGRAM the internal pressure vs. deflection characteristics of a particu-lar bellows can be predicted by input of a few factors.

• Journal of Integrative Natural Science
• /
• v.9 no.3
• /
• pp.166-170
• /
• 2016

Collagen plays a vital role in the maintenance of structure and function of a human body. It has been widely applied in various fields including biomedical, cosmeceutical, food, pharmaceutical and tissue engineering. In the present study, the docking behaviour of type I collagen with 15 different ligands namely hydroxymethylfurfural, methylglyoxal, methylsyringate, O-methoxyacetophenone, 3-phenyllactic acid, 4-hydroxybenzoic acid, kojic acid, lumichrome, galangin, artoindonesianin F, caffeic acid, 4-coumaric acid, origanol A, thymoquinone and quercetin was evaluated along with their putative binding sites using Discovery Studio Version 3.1. Docking studies and binding free energy calculations revealed that origanol A has maximum interaction energy (-40.48 kcal/mol) and quercetin with the least interaction energy (-15.44 kcal/mol) as compared to the other investigated ligands. Three ligands which are galangin, methylsyringate and origanol A were shown to interact with Asp21 amino acid residue of chain B (type I collagen). Therefore, it is strongly suggested that the outcomes from the present study might provide new insight in understanding these 15 ligands as potential type I collagen modulators for the prevention of collagen associate disorders.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.2
• /
• pp.27-35
• /
• 1981

In this study, a numerical theory based on space charge overlapping model and experiments on the propriety of its theory were carried out to analyze the switching transient characteristic in amorphous coalcogenide thin film. Theoretical and experimental as well as analytical investigations were carried out on the switching behaviour in a transient state arising from a voltage pulse applied to amorphous chalcogenide thin films at room temperature. The results can be explained in terms ot a simple theoretical model of the electronic characteristics of switching. The injection of carriers are necessary to initiate the switching action and injected carriers contribute to the current flow as a space-charge limited current(SCLC) The proposed charge controlled switching characteristics can be explained by double injection space charge overlapping model.

• Structural Engineering and Mechanics
• /
• v.38 no.2
• /
• pp.157-169
• /
• 2011

In this paper the time-dependent closed-form static solution of the suspended pre-stressed biconcave and biconvex cable trusses with unmovable, movable and elastic or viscoelastic yielding supports subjected to various types of vertical load is presented. Irvine's forms of the deflections and the cable equations are modified because the effects of the rheological behaviour needed to be incorporated in them. The concrete cable equations in the form of the explicit relations are derived and presented. From a solution of a vertical equilibrium equation for a loaded cable truss with rheological properties, the additional vertical deflection as a time-function is determined. The time-dependent closed-form model serves to determine the time-dependent response, i.e., horizontal components of cable forces and deflection of the cable truss due to applied loading at the investigated time considering effects of elastic deformations, creep strains, temperature changes and elastic supports. Results obtained by the present closed-form solution are compared with those obtained by FEM. The derived time-dependent closed-form computational model is used for a time-dependent simulation-based reliability assessment of cable trusses as is described in the second part of this paper.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.11
• /
• pp.179-190
• /
• 2021

The purpose of this study is to understand the impact of influencers on generation Z (Gen Z) in the online environment. This article has applied the theories of source credibility, TAM, IAM, and TPB to identify influencer characteristics that affect the purchasing behaviors of Gen Z customers. This research was conducted using a Google Form survey with 24 pre-designed questions. A total of 464 valid questionnaires from Gen Z Vietnamese were collected between November 2020 and January 2021. Data was analyzed using partial least squares structural equation modeling (PLS-SEM) with SmartPLS 3 software. The analysis results confirmed that the components of influencer credibility have a positive impact on Gen Z's purchasing behaviors under the mediated influence of argument quality, perceived usefulness, and social influence. Surprisingly, for Gen Z, the influencers' attractiveness has the strongest impact on their online behavior. More specifically, attractiveness plays the most important role in the perceived usefulness and social influence of Gen Z customers, while influencers' expertise has the strongest impact on argument quality delivered to customers. This study provides evidence of a change in the way Gen Z responds to marketing activities. They are more drawn by the attraction of influencers than their expertise.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.3
• /
• pp.1053-1064
• /
• 2021

The objective of this research is to empirically study public servant knowledge sharing intention by implementing the Theory of Planned Behavior (TPB) of the Sustainable Development Goals (SDGs). The researcher proposes an extended TPB combined with a perceived environmental concern variable as a determinant of behavioral intention. A total of 150 questionnaires were distributed among civil society and the public sector at the district level in the Central Kalimantan Province of Indonesia. Collectively, 126 inquiries were received. A Partial Least Squares (PLS) analysis was applied to analyze and test the research model and hypothesis. The results show that all of the components of the TPB significantly influenced perceived SDG realization. The findings also partially show that knowledge sharing intention mediated the effect of attitude, perceived behavioral control, and perceived environmental concern on SDG realization. This study confirms that perspectives that affect knowledge sharing intention among public sectors could be approached based on the offered model. Hence, the local government can implement the suggestion offered in this research. The originality of this paper lies in the fact that this study discloses factors affecting knowledge sharing among public servants.