• 한국실내디자인학회논문집
• /
• 제21권4호
• /
• pp.114-120
• /
• 2012

There are lots of buildings which were built before the Legislation on building energy rating system. Remodeling of the buildings would be required for an improvement of the building energy rating system was enforced by the government. In the Passive Building Design, Elements which will be used for the remodeling are Insulation, Window, External venetian blind, Heat exchanger. The Purpose of this study is to indicate a Method for the improvement of Energy saving by an analysis of Construction Cost, Cost Evaluation, Energy performance Efficiency in applied design elements. In this study, the remodeling of existing public buildings to improve energy efficiency rating was applied to extract the elements of design-specific energy performance, efficiency, and the application of the designs that has been analyzed. The results were as follows: applying the design-specific cost-effective investment that represents the economy (investment efficiency/%) surveyed the average insulation(7.0%), triple glazed windows(10.1%), double glazed windows(12.1%), external shading(24.5%), and Heat(77.2%) were analyzed in order to be more efficient. Analysis of the basis of information on the existing public buildings to improve energy efficiency rating for the remodeling depending on driving conditions at a degree of individual difference. The main effect, however, depending on economic investment, design elements, heat exchangers, external awning, double glazed windows, triple glazed windows, insulation, is recommended as review of the order shall be determined.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.391-394
• /
• 2004

In this study, highly thermal stable Ni Germanosilicide has been utilized using NiPt alloy and novel NiPt/Co/TiN tri-layer. And, the Ni Germanosilicide Properties were characterized according to different Ge ratio (x) in $Si_{l-x}Ge_x$ for the next generation CMOS application. The sheet resistance of Ni Germanosilicide utilizing pure-Ni increased dramatically after the post-silicidation annealing at $600^{\circ}C$ for 30 min. Moreover, more degradation was found as the Ge fraction increases. However, using the proposed NiPt/Co/TiN tri-layer, low temperature silicidation and wide range of RTP process window were achieved as well as the improvement of the thermal stability according to different Ge fractions by the subsequent Co and TiN capping layer above NiPt on the $Si_{l-x}Ge_x$. Therefore, highly thermal immune Ni Germanosilicide up to $600^{\circ}C$ for 30 min is utilized using the NiPt/Co/TiN tri-layer promising for future SiGe based ULSI technology.

• Restorative Dentistry and Endodontics
• /
• 제29권5호
• /
• pp.454-461
• /
• 2004

The purpose of this study is to compare and to evaluate the effects of the degree of saturation on the progression of artificial root caries lesion. A total of 8 human premolars without any defects and cracks selected and the cementum were removed and the teeth were cleaned with ultrasonic device and pumice without fluoride. Each tooth was sectioned into 6 pieces and they were ground with #800 sandpaper until they had a thickness of 200pm. Specimens were applied with nail vanish except for the 2-3 mm window area after application of bonding agent. Under the constant pH, the specimens were divided into 6 groups (degree of saturation: 0.1415, 0.1503, 0.1597, 0.1676, 0.1771. 0.1977). Each group was immersed in acid buffer solution for 1. 2, 3, 5 days under controlled temperature ($25^{\circ}C$) and imbibed in water and examined using the polarizing microscope. The results were as follows 1. Although the degree of saturation of demineralization solution decreased, the depth of penetration in the dentin was constant. 2. Erosion was observed on the surface of all the teeth in the group I, II. In the group III, IV, V, surfaces were not changed. The teeth in the group VI showed the more mineralized surface but not the shape of the dentinal tubules distinctively. 3. In all groups, the lesion progressed rapidly at the first day of the experiment, but increased gradually as time elapsed.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2002년도 춘계학술대회 및 임시총회
• /
• pp.227-230
• /
• 2002

이 논문에서는 신경회로망을 이용한 원전 금속파편 시스템에 적용하여 진단 가능성을 제시한다. 첫 번째로, 오경보 감소에 대해 역전파 신경망을 적용하여 오경보 감소에 대한 가능성을 제시하였다. 즉, 전처리 단계에서 이동 평균 필터를 적용하여 저주파수인 배경잡음을 소거하였으며, 충격신호의 시작시간, 상승시간, 반주기, 전체시간을 신경망의 입력 값으로 사용하였다 발전소 운전가동시의 오경보 및 충격시험시의 신호를 적용한 결과 오경보가 1/4 이내로 줄어드는 유용한 결과를 보임을 알 수 있었다. 두 번째로 신경회로망 이론을 금속파편 진단(질량추정)에 적용하여 진단 가능성을 제시하였다. 신경회로망에서 사용된 알고리즘은 역전파 알고리즘(Back Propagation Network)을 사용하였으며, 세 가지의 입력변수(Rising Time, Half Period, Maximum amplitude)를 이용하였다. 영광 3호기 시운전시 강구의 충격 데이터로 미리 학습을 시킨 후 실제 금속파편 신호와 비교/분석하여 질량값을 추정하였다. 분석한 결과 비교적 만족할 만한 결과를 얻어 금속파편 진단에 신경회로망의 적용이 가능할 것으로 판단하였다.

• KDI Journal of Economic Policy
• /
• 제33권1호
• /
• pp.93-124
• /
• 2011

본고에서는 Tversky and Kahneman(1974)의 기준점 효과와 Kahneman and Tversky(1979)의 전망이론으로 해석이 가능한 현상이 우리나라 자산시장에 동시에 나타나는지를 주가 및 부동산 가격을 대상으로 검증하였다. 전망이론의 경우 위험 회피 성향 투자자가 가격 상승 시 매각을 선호하는 것으로 예측하는데, 본고는 이런 성향이 자산가격 수익의 변동성이 증가하는 경우 더 강화되는 것으로 보았다. 1990년대 이후 우리나라 자료를 바탕으로 실증분석한 결과, 과거 수익률이 양(+)인 경우, 주가수익률은 과거 20 또는 30 영업일 자료(window)를 이용하여 산출한 변동성에, 아파트를 제외한 주택가격 수익률은 과거 24~36개월의 자료를 이용하여 산출한 변동성에 각각 통계적으로 유의한 영향을 받는 것으로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.416-421
• /
• 2005

Most of solar system dissemination has been focused on domestic hot water system of which utilization to a building is relatively simple and safe than solar heating system. Through the survey on a cause of solar house dissemination failure in Korea, we conclude that design integration and systematic approach method for technology application are the most important element for a successful solar house. KIER(Korea Institute of Energy Research) and Hanbat National University have started new project on a development of Zero energy Solar House, called ZeSH which can be sustained just by natural energy without the support of existing fossil fuel. This is the 1st phase research of 10 years long-term ZeSH plan which develops a low-cost and $100\%$ self sufficient ZeSH. The goal of 1st phase ZeSH research is to get a $70\%$ self sufficiency only in thermal loads. Actual demonstration house, named KIER ZeSH I was designed and constructed as a result of 1st phase research work in the end of 2002. Various innovative technologies such as super insulation, high performance window, passive and active solar systems, ventilation heat recovery system are applied and evaluated to the KIER ZeSH I. A lot of computer simulations had been conducted for the optimal design and system integration in every design steps. Considering all the results from detailed hourly computer simulation, it is expected that at least $70\%$ self-sufficiency in thermal loads which is 1st phase target value can be excessively achieved in actual demonstration house. Besides, many valuable findings from the design and analysis to construction could be established such as collaboration method among the participants, practical design and construction techniques for system integration and the others. The purpose of this paper is to introduce the main findings through the development of KIER ZeSH I project. Practical guidelines in every design step for new low- or zero- energy solar house is proposed as result.

• 한국정보처리학회논문지
• /
• 제7권12호
• /
• pp.3910-3922
• /
• 2000

현재의 전력시스템은 컴퓨터와 통신기술의 발전으로 분산시스템인 EMS(Energy Menagement System)/SCADA(Super-vision Control and Data Acquisition) 형태로 운영되어 전력의 생산, 전송 그리고 분배가 효과적으로 이루어지고 있다. 그러나 각 시스템은 언어, 운영체제 그리고, 통신프로토콜이 서로 다른 제품으로 구성되어 시스템간에 데이터를 교환하는데 많은 어려움이 따르고 있다. 이러한 문제를 해결하기 위해서는 미국 전력연구소는 전력제어센터간의 통신을 담당하는 ICCP(Inter-Control Center Protocol)라는 새로운 형태의 통신규약을 발표하였다. ICCP는 자동화용 표준 통신규약인 MMS(Manufacturing Message Specification)를 응용계층의 하부 규약으로 지정함으로써 서로 다른 기종의 제어센터간의 원활한 통신을 지원한다. 본 논문은 ICCP의 특징과 MMS와 ICCP가 어떻게 상호 연관되는가를 밝힌다. ICCP에서 이용하는 MMS 라이브러리(library)의 86개의 서비스 중 일부 서비스를 구현한 후 이것을 이용하여 TCP/IP 환경 하에서 ICCP의 기본이면서 핵심적인 기능을 구현한다. 그 다음, ICCP 프로토콜을 이용하여 EMS간의 통신을 모델링하고, 전력센터간의 실제 데이터 교환을 윈도우 환경 하에서 구현하여 ICCP 프로토콜의 동작과 기능을 보여준다.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.785-790
• /
• 2009

웹 2.0환경에 중심이 되고 있는 블로그 사용자들에게 있어 웹 브라우저에서 실행될 수 있는 위젯(widget)은 자신을 표현하고, 블로그의 가치를 돋보이게 하는 도구이다. 위젯은 윈도우(Window)와 가젯(Gadget)의 합성어로 응용 프로그램을 동작시키고 결과를 화면에 표시하는 그래픽 사용자 인터페이스(GUI) 도구의 일종으로써 사용자가 원하는 서비스를 받아 볼 수 있는 기능성 프로그램이다. 또한 운영 제체(OS)나, 웹, 모바일에서 사용자에게 정보 전달 및 사용 편리성과 효율성을 제공하고 있다. 그러나 현재 위젯은 정보 전달이나 현상 표현에 초점을 마주고 있어, 사용자들이 원하는 재미를 충족시켜주지 못하고 있다. 이 연구는 웹 2.0 환경에서 사용자가 많이 사용하고 있는 위젯의 재미와 흥미를 느끼는 요소가 무엇인지를 파악하고, 위젯별 재미 요소를 분류 하고자 하는 연구이다. 위젯에서의 재미 요소에 대해 아직까지 정의된 것이 없기 때문에 제품 디자인과 게임에서의 재미 요소를 분류 및 분석을 통해 추출 하였고 추출된 결과를 사용자의 감성 상태를 대표하는 감성 어휘와 매핑을 통해 파악하였다. 그리고 위젯별 재미 요소를 알아내기 위해 블로그 사용자를 대상으로 온라인 설문을 실시하였다. 위젯 선정은 사용자가 많이 이용하고 있는 국내 위젯과 일본 위젯으로 선택하였고 5점 척도를 이용해 위젯별 재미 요소를 분류하였다. 이 결과를 바탕으로 사용자가 선호하는 재미 요소를 파악할 수 있다.

• 복합신소재구조학회 논문집
• /
• 제4권2호
• /
• pp.15-24
• /
• 2013

This project is mainly related to evaluation of total energy consumption of low energy house, the exterior envelope of which was wholly composed of structural insulated panels(SIP). The U-value of applied SIP was in the range of 0.189 to $0.269W/m^2{\cdot}K$ and the U-value of pair glass from 0.78 to $1.298W/m^2{\cdot}K$ was applied for window dependent to its function respectively. For comparison of total energy performance, the energy simulation for pilot house was performed to compare with the control house having insulation criteria of Korean building regulation in 2009. Based on simulation of dynamic energy performance, the pilot house saved 48.3% of annual energy consumption while the control house in 2009 consumed as 85.7GJ/y. In case of heating, the result showed that the energy saving ratio amounted to 76.7%. For $CO_2$ emission, the pilot house diminished approximately 35.4% from $6,208.4kgCO_2$ to $4,009.2kgCO_2$. In payback period to early investment, it was analyzed the pilot house took 7.8 years, when the low energy house built by other insulation method with same thermal perfusion took 11.5 years. From this result, it is considered that the SIP is more effective, economic to Green Home application.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.138-138
• /
• 2009

Recently, thin-film solar cells of Cu(In,Ga)$Se_2$(CIGS) have reached a high level of performance, which has resulted in a 19.9%-efficient device. These conventional devices were typically fabricated using chemical bath deposited CdS buffer layer between the CIGS absorber layer and ZnO window layer. However, the short wavelength response of CIGS solar cell is limited by narrow CdS band gap of about 2.42 eV. Taking into consideration the environmental aspect, the toxic Cd element should be replaced by a different material. It is why during last decades many efforts have been provided to achieve high efficiency Cd-free CIGS solar cells. In order to alternate CdS buffer layer, ZnS buffer layer is grown by using chemical bath deposition(CBD) technique. The thickness and chemical composition of ZnS buffer layer can be conveniently by varying the CBD processing parameters. The processing parameters were optimized to match band gap of ZnS films to the solar spectrum and exclude the creation of morphology defects. Optimized ZnS buffer layer showed higher optical transmittance than conventional thick-CdS buffer layer at the short wavelength below ~520 nm. Then, chemically deposited ZnS buffer layer was applied to CIGS solar cell as a alternative for the standard CdS/CIGS device configuration. This CIGS solar cells were characterized by current-voltage and quantum efficiency measurement.