• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.758-763
• /
• 2006

In various fields of basic science and engineering, in order to present signals and systems exactly and acquire useful information from spatial and timely changes, many researches have been processed. In these methods, the Fourier transform which represents signal as the combination of the frequency component has been applied to the most fields. But as transform not to consider time information, the Fourier transform has its limitations of application. To overcome this problem, a variety of methods including the wavelet transform have been proposed. As transform to represent signal by using the changing window, according to scale parameter in time-scale domain, the wavelet transform is capable of multiresolution analysis and defines various functions according to the application environments. In this paper, to detect features of signal we analyzed wavelet the spectrum by using the basis function of the fourier transform.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1981.05a
• /
• pp.37.2-38
• /
• 1981

Recently the efficacy of all ear drops in perforated tympanic membranes has been questioned and the safety of using the drugs intratympanically has been challanged. Many drugs not normally ototoxic when given systemically become ototoxic when administered via the middle ear. According to Stupp and others (1973) among neomycin, polymyxin-G, gentamycin, erythr omycin, tetracycline and penicillin, only penicillin was found to be free of toxic effects. The ototoxic antibiotics probably reach the inner ear by permeating the round window membrane, into the perilymph and then through Reissner's membrane to the endolymph. The main pathological changes are degeneration of stria vascularis, degeneration of sensory epithelia and degeneration of ganglion cells. We report with reference, a case of profound sensorineural deafness following the application of Terramycin powder intratympanically, in a 63 year old woman.

• Journal of IKEEE
• /
• v.25 no.1
• /
• pp.168-173
• /
• 2021

In this paper, we propose a new structure of ESD protection device that achieves improved electrical characteristics through structural change of LVTSCR, which is a general ESD protection device. In addition, it applies N-Stack technology for optimized design in the ESD Design Window according to the required voltage application. The N-Well area additionally inserted in the existing LVTSCR structure provides an additional ESD discharge path by electrically connecting to the anode, which improves on-resistance and temperature characteristics. In addition, the short trigger path has a lower trigger voltage than the existing LVTSCR, so it has excellent snapback characteristics. In addition, Synopsys' T-CAD Simulator was used to verify the electrical characteristics of the proposed ESD protection device.

• Korean Journal of Artificial Intelligence
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2024

Recently, various techniques are being applied through the development of medical AI, and research has been conducted on the application of super-resolution AI models. In this study, evaluate the results of the application of the super-resolution AI model to brain CT as the basic data for future research. Acquiring CT images of the brain, algorithm for brain and bone windowing setting, and the resolution was downscaled to 5 types resolution image based on the original resolution image, and then upscaled to resolution to create an LR image and used for network input with the original imaging. The SRCNN model was applied to each of these images and analyzed using PSNR, SSIM, Loss. As a result of quantitative index analysis, the results were the best at 256×256, the brain and bone window setting PSNR were the same at 33.72, 35.2, and SSIM at 0.98 respectively, and the loss was 0.0004 and 0.0003, respectively, showing relatively excellent performance in the bone window setting CT image. The possibility of future studies aimed image quality and exposure dose is confirmed, and additional studies that need to be verified are also presented, which can be used as basic data for the above studies.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.47
• /
• pp.185-212
• /
• 2010

This study aims to derive practical suggestions to apply application methods by auxiliary costs, especially application of logistics and customs clearance areas in order to establish EPS support system of auxiliary cost occurred from export/import. For the propose, this study has analyzed types and situation of auxiliary costs, application method by auxiliary costs, payment situation of logistics auxiliary costs and clearance auxiliary costs and suggested the relevant problems and their application methods. Especially, in case of logistics auxiliary costs through connection to the attached general documents required for negotiation by reflecting characteristics of B2B transactions. In addition, it has suggested that those services by the said system should be conveniently used commonly by the export companies and logistics companies through provision of various payment measures, support of foreign currency payment, etc. and security of reliability/system stability, etc. for the compatible payment with other systems as the prerequisite for the successful settlement of the auxiliary costs EPS. It is expected that satisfaction of the uTradeHub users such as export/import companies and logistics companies will be increased, user-oriented customized information services such as raw cost prediction service through calculation of auxiliary costs could be available in the future and efficiency of work processes related to auxiliary costs will be increased, by providing the EPS through various single window based payment measures through establishment of the export/import auxiliary costs payment system.

• Journal of radiological science and technology
• /
• v.45 no.2
• /
• pp.135-143
• /
• 2022

In SPECT image, scatter count is the cause of quantitative count error and image quality degradation. This study is to evaluate the accuracy of CT based SC(CTSC) and energy window based SC(EWSC) as the comparison with existing Non SC. SPECT/CT images were obtained after filling air in order to acquire a reference image without the influence of scatter count inside the Triple line insert phantom setting hot rod(^99mTc 74.0 MBq) in the middle and each SPECT/CT image was obtained each separately after filling water instead of air in order to derive the influence of scatter count under the same conditions. For EWSC, 9 sub-energy windows were set additionally in addition to main energy window(140 keV, 20%) and then, images were acquired at the same time and five types of EWSC including DPW(dual photo-peak window)10%, DEW(dual energy window)20%, TEW(triple energy window)10%, TEW5.0%, TEW2.5% were used. Under the condition without fluctuations in primary count, total count was measured by drawing volume of interest (VOI) in the images of the two conditions and then, the ratio of scatter count of total counts was calculated as percent scatter fraction(%SF) and the count error with image filled with water was evaluated with percent normalized mean-square error(%NMSE) based on the image filled with air. Based on the image filled with air, %SF of images filled with water to which each SC method was applied is non scatter correction(NSC) 37.44, DPW 27.41, DEW 21.84, TEW10% 19.60, TEW5% 17.02, TEW2.5% 14.68, CTSC 5.57 and the scatter counts were removed the most in CTSC and %NMSE is NSC 35.80, DPW 14.28, DEW 7.81, TEW10% 5.94, TEW5% 4.21, TEW2.5% 2.96, CTSC 0.35 and the error in CTSC was found to be the lowest. In SPECT/CT images, the application of each scatter correction method used in the experiment could improve the quantitative count error caused by the influence of scatter count. In particular, CTSC showed the lowest %NMSE(=0.35) compared to existing EWSC methods, enabling relatively accurate scatter correction.

• International Journal of Internet, Broadcasting and Communication
• /
• v.5 no.2
• /
• pp.15-17
• /
• 2013

The web service companies develop the App support technique of the HTML5 base in the smart media system and smart TV competitively while the Web platform of the HTML5 base is legislated with the next generation national standard. It is essential to the web kernel, which is the common library of the operating system including the file, window, resource and network management is provided in order to support the various app developments of the HTML5 base effectually. Additionally, the web application program can support UI/UX function of the desktop user using the web browser and JavaScript drive and administration, window management function, and etc. is needed.

• Proceedings of the SAREK Conference
• /
• 2009.06a
• /
• pp.689-694
• /
• 2009

On account of Indoor Air Quality(IAQ) deterioration by reason of high isulation and air tightness for energy saving, absence of energy efficiency ventilation system development that can be domestic existing window system, the cost increase and the energy addition loss by mechanical ventilation for IAQ improvement the ventilation obligation making design standard was prepared by a social and technical background and the necessity. In this study, open module type natural ventilation window system for energy saving included a fixed and continuous quantity ventilation was developed. The purpose that indoor thermal comfort environment evaluate of indoor resident.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3E
• /
• pp.84-94
• /
• 2008

Displacement estimation is a crucial step in ultrasonic strain imaging. The displacement between a pre- and postcompression signal in the current data window is estimated by first shifting the postcompression signal by the displacement obtained in the previous data window to reduce their decorrelation and then determining the remaining part of the displacement through autocorrelation and conversion of phase difference into time delay. However, since strain image quality tends to vary with the amount of compression applied, we propose two new methods for enhancing strain image quality, i.e., displacement normalization and adaptive persistence. Both in vitro and in vivo experiments are carried out to acquire ultrasound data and produce strain images in real time under the application of quasi static compression. The experimental results demonstrate that the methods are quite effective in improving strain image quality and thus can be applied to implementing an ultrasound elasticity imaging system that operates in real time.

• KIEAE Journal
• /
• v.13 no.1
• /
• pp.75-81
• /
• 2013

The balcony of our apartment building consists of unique construction similar to double skin. It is announced broadly that double skin is very effective system in improvement of natural ventilation and indoor thermal environment, and outdoor sound protection. So, for the improvement of indoor climate and energy saving, many peoples studied about environmental performance of our balcony construction. This study focus on shaft box facade, special form of box window construction. It consists of a system of box window with continuous vertical shafts that extend over a number of stories to create a stack effect. Proto-type was decided by analyzing various types of exiting apartments. Shaft box type balcony was created by setting up shaft space at a part of balcony. Air flow and contribution of air temperature were simulated, performance of shaft box type balcony was compared with existing balcony. Finally, we confirmed that shaft box type balcony has many possibility for improvement of indoor environment.