• The Journal of the Petrological Society of Korea
• /
• v.25 no.3
• /
• pp.241-252
• /
• 2016

In this paper, in order to test the possibility of applying K feldspar $pIR-IRSL_{290}$ signal(read out at $290^{\circ}C$) to date old terrace sediments(up to ~ 200 ka, MIS 7) in Korea, we investigated luminescence properties of $pIR-IRSL_{290}$ signals in K feldspar extracts from 27 marine and fluvial terrace sediment samples, and these were compared with those of quartz OSL and conventional K feldspar $IRSL_{50}$ (readout at $50^{\circ}C$) signals. The averaged $2D_0$ value of K feldspar $pIR-IRSL_{290}$ growth curves was ~ 700 Gy, which is consistent with that of $IRSL_{50}$ signal, and this is 3 times higher than that for quartz OSL (~ 250 Gy) on average. Where possible, K feldspar $pIR-IRSL_{290}$ ages were compared with quartz OSL and conventional $IRSL_{50}$ ages. Our preliminary K feldspar $pIR-IRSL_{290}$ ages were older than quartz OSL ages by about 200%, while fading rate-corrected conventional $IRSL_{50}$ ages are in good agreement with those based on quartz OSL. This seems to indicate the possibility of K-feldspar $pIR-IRSL_{290}$ age overestimation due to the presence of unbleachable $pIR-IRSL_{290}$ signals, even with a prolonged exposure to sunlight. Both quartz OSL and K-feldspar $pIR-IRSL_{290}$ signals for the samples from Noeum fluvial terrace and Gusan fault site were all in dose saturation level, thus unable to estimate the formation ages of the sediments. However, $2D_0$ values derived from the dose response growth curves strongly indicate that the Noeum fluvial terrace sediments have formed before 109-140 ka, while the fluvial sediments from Gusan fault were desposited before 100-105 ka. Further, this seems to suggest that the previous quartz OSL ages of ~40-50 ka for Gusan fault sediments should be the underestimated ones due to dose saturation problem.

• Korean Journal of Soil Science and Fertilizer
• /
• v.19 no.3
• /
• pp.231-238
• /
• 1986

This field experiment was undertaken to assess the effects of three levels of inclination ($10^{\circ}$, $20^{\circ}$ and $30^{\circ}$) and four rates of $N-P_2O_5-K_2O$ (0-0-0, 14-10-10, 28-25-25, and 42-40-40 kg/10a) on the hilly pasture concerning to establishment, forage yield and quality, and botanical composition in the mixed grass-clover sward set up on a new reclaimed woodland by an oversowing method. This part was concerned with the concentration and mutual balance of mineral nutrients in relation to grass tetany hazard. The results obtained were summarized as follows: 1. Concentration of exchangeable Mg, relative proportions of Mg to CEC, K, and Ca in soil were considerably below the critical level for good forage growth and prevention of grass tetany. These properties were rather worsened by increasing the inclination grade and the NPK rate. 2. Compared with the critical level for the likelihood of tetany (Mg < 0.2%, K > 2.5%, and K/(Ca+Mg) equivalent ratio > 2.2 in forages in DM basis), mean concentration of Mg in mixed forages turned out to range from 0.09 to 0.14%. 2.6% of K concentration and 2.5 of K/(Ca+Mg) equivalent ratio were shown to be at a normal NPK rate. The likelihood of grass tetany was generally enhanced by increasing the inclination grade and the NPK rate. 3. The increasing of the inclination grade and NPK rate rather aggravated the low Mg concentration and unbalanced mutual ratios of mineral nutrients, from which resulted the grass tetany hazard and the depression of forage growth. To prevent these two resulted factors, Mg fertilization on grassland and/or extra Mg supplement to dairy cattle needed to be carried out. 4. The Ca/P ratios in the mixed forages ranging from 1.0 to 2.0 were reduced by the increased rate of NPK, whereas the difference due to inclination grade was yet to be recognized.

• PNF and Movement
• /
• v.19 no.3
• /
• pp.423-433
• /
• 2021

Purpose: Proprioceptive neuromuscular facilitation (PNF) is a method for promoting functional movements by facilitating neuromuscular responses through the stimulation of proprioceptors in the body using spiral and diagonal patterns. Irradiation, a basic principle of PNF, is a phenomenon in which the muscle activity of a body part caused by resistance is increased or spread into muscles in other parts via their connected muscles. Resistance training can be divided by body alignment into closed and open chain exercises. Methods: In this study, 19 healthy men in their 20s and 30s were selected as subjects. They performed PNF hip flexion, abduction, and internal rotation motions on their dominant side in an open chain exercise posture in which the nondominant sole was away from the wall, and in a closed chain exercise posture in which the sole was fixed to the wall. The nondominant leg's muscle activity was measured while resistance was maintained with applied pressure at 0%, 25%, 50%, 75%, and 100% of the maximum muscle strength in the last range of motions. A two-way analysis of variance (ANOVA) was conducted for a comparative analysis of the contralateral leg's muscle activity according to the chain exercise postures and the intensity of resistance intensity during PNF hip flexion, abduction, and internal rotation. In addition, an independent sample T-test was conducted for a comparative analysis of each chain exercise posture according to the intensity of resistance. A one-way ANOVA and a Scheffe post-hoc test were also performed to analyze the contralateral leg's muscle activity according to the intensity of resistance in the closed and open chain exercise postures. Results: Results of the two-way ANOVA found that the gluteus medius and the biceps femoris had statistically significant differences in both the chain exercise postures and resistance intensity (p<0.05), and that the vastus medialis and the gastrocnemius did not exhibit statistically significant differences in the chain exercise postures (p>0.05) but showed statistically significant differences in resistance intensity (p<0.05). As a result of the independent sample T-test, the application of the PNF hip flexion-abduction-internal rotation pattern led to a statistically significant difference in the contralateral gluteus medius during the closed chain exercise posture (p<0.05). According to the results of the one-way ANOVA and the Scheffe post-analysis, statistically significant differences were observed in the gluteus medius at 50%, biceps femoris at 75%, vastus medialis at 100%, and gastrocnemius at 100% during the closed chain exercise posture based on a resistance intensity of 0% (p<0.05). In the open chain exercise posture, statistically significant differences were found in the gluteus medius at 50%, biceps femoris at 50%, and vastus medialis at 75% based on the resistance intensity of 0% (p<0.05). In the same posture, there was no significant difference in the gastrocnemius's resistance intensity (p>0.05). Conclusion: When the PNF leg pattern is applied, each muscle requires effective chain exercise postures and resistance intensity to generate the contralateral leg muscle's irradiation.

• Journal of Mushroom
• /
• v.19 no.3
• /
• pp.210-215
• /
• 2021

For sterilization of microorganisms of the Listeria genus contaminating enoki mushroom, pilot mushroom grower equipped with air sterilization devices were developed. Sterilization experiments were performed using physical and chemical treatments. Internal temperature and humidity were controlled, maintaining 6.62℃±0.30 in the upper shelves, 6.46℃±0.24 in the middle shelves, and 6.48℃±0.25 in the lower shelves. Humidities were 79.97%±4.42, 79.43%±4.06, and 79.94±4.30%, respectively, with a temperature setting of 6.5℃, and a relative humidity of 75%. A suitable enoki mushroom cultivation stage for air sterilizer application was during the growth stage, with temperature in the 6.5~8.5℃ range, and humidity of 70~80%. At these same internal conditions, the ozone concentration in the mushroom cultivator was found to be 160 ppb during ion-cluster generator operation. After physical sterilization, the Listeria innocua survival rate was 0.1 to 0.9% using ion cluster sterilization, and 9.3 to 10.6% using UV air sterilization. The Listeria innocua survival rates on different materials were 9.3~10.6% on the metal specimen, and 9.9~16.2% on the plastic wrapper. The survival rate was particularly high on the rough side of the plastic wrapper. Ion cluster air sterilization is a labor-saving and effective method for suppressing the occurrence of Listeria bacteria on mushroom growers walls and shelves. For the plastic wrapper, chemical sterilization is more effective than physical sterilization.

• Korean Journal of Mineralogy and Petrology
• /
• v.34 no.3
• /
• pp.169-176
• /
• 2021

This study aimed to fundamentally understand structural changes of zeolite under pressure and in the presence of different pressure-transmitting media (PTM) for application studies such as immobilization of heavy metal cation or CO₂ storage using pressure. High-pressure X-ray powder diffraction study was conducted on the zeolite-W (K_6.4Al_6.5Si_25.8O₆₄× 15.3H₂O, K-MER) to understand linear compressibility and the bulk moduli in different PTM conditions. Zeolite-w is a synthetic material having the same framework as natural zeolite merlinoite ((K, Ca_0.5, Ba_0.5, Na)₁₀ Al₁₀Si₂₂O₆₄× 22H₂O). The space group of the sample was identified as I4/mmm belonging to the tetragonal crystal system. Water, carbon dioxide, and silicone-oil were used as pressure-transmitting media. The mixture of sample and each PTM was mounted in a diamond anvil cell (DAC) and then pressurized up to 3 GPa with an increment of ca. 0.5 GPa. Pressure-induced changes of powder diffraction patterns were measured using a synchrotron X-ray light source. Lattice constants, and bulk moduli were calculated using the Le-Bail method and the Birch-Murnaghan equation. In all PTM conditions, linear compressibility of c-axis (𝛽^c) was 0.006(1) GPa^-1 or 0.007(1) GPa^-1. On the other hand, the linear compressibility of a(b)-axis (𝛽^a) was 0.013(1) GPa^-1 in silicone-oil run, which is twice more compressible than the a(b)-axis in water and carbon dioxide runs, 𝛽^a = 0.006(1) GPa^-1. The bulk moduli were measured as 50(3) GPa, 52(3) GPa, and 29(2) GPa in water, carbon dioxide, and silicone-oil run, respectively. The orthorhombicities of ac-plane in the water, and carbon dioxide runs were comparatively constant, near 0.350~0.353, whereas the value decreased abruptly in the silicone-oil run following formula, y = -0.005(1)x + 0.351(1) by non-penetrating pressure fluid condition.

• Journal of Life Science
• /
• v.31 no.9
• /
• pp.840-848
• /
• 2021

This study was conducted to estimate annual trends and the environmental effects in the racing records of Jeju horses. The Korean Racing Authority (KRA) collected 48,645 observations for 2,167 Jeju horses from 2002 to 2019. Racing records were preprocessed to eliminate errors that occur during the data collection. Racing times were adjusted for comparison between race distances. A stepwise Akaike information criterion (AIC) variable selection method was applied to select appropriate environment variables affecting racing records. The annual improvement of the race time was -0.242 seconds. The model with the lowest AIC value was established when variables were selected in the following order: year, budam classification, jockey ranking, trainer ranking, track condition, weather, age, and gender. The most suitable model was constructed when the jockey ranking and age variables were considered as random effects. Our findings have potential for application as basic data when building models for evaluating genetic abilities of Jeju horses.

• Clean Technology
• /
• v.27 no.4
• /
• pp.332-340
• /
• 2021

With the recent reinforcement of emission standards, it is necessary to make efforts to reduce NOx from air pollutant-emitting workplaces. The NOx reduction method mainly used in industrial facilities is selective catalytic reduction (SCR), and the most commercial SCR catalyst is the ceramic honeycomb catalyst. This study was carried out to reduce the NOx emitted from steel plants by applying De-NOx catalyst coated on metallic monolith. The De-NOx catalyst was synthesized through the optimized coating technique, and the coated catalyst was uniformly and strongly adhered onto the surface of the metallic monolith according to the air jet erosion and bending test. Due to the good thermal conductivity of metallic monolith, the De-NOx catalyst coated on metallic monolith showed good De-NOx efficiency at low temperatures (200 ~ 250 ℃). In addition, the optimal amount of catalyst coating on the metallic monolith surface was confirmed for the design of an economical catalyst. Based on these results, the De-NOx catalyst of commercial grade size was tested in a semi-pilot De-NOx performance facility under a simulated gas similar to the exhaust gas emitted from a steel plant. Even at a low temperature (200 ℃), it showed excellent performance satisfying the emission standard (less than 60 ppm). Therefore, the De-NOx catalyst coated metallic monolith has good physical and chemical properties and showed a good De-NOx efficiency even with the minimum amount of catalyst. Additionally, it was possible to compact and downsize the SCR reactor through the application of a high-density cell. Therefore, we suggest that the proposed De-NOx catalyst coated metallic monolith may be a good alternative De-NOx catalyst for industrial uses such as steel plants, thermal power plants, incineration plants ships, and construction machinery.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_2
• /
• pp.1819-1827
• /
• 2021

Land-use/cover change caused by rapid urbanization in South Korea is one of the concerns in flood risk management because groundwater recharge by precipitation hardly occurs due to an increase in impermeable surfaces in urban areas. This study investigated the hydrologic effects of land-use/cover on groundwater recharge in the Yeonje-gu district of Busan, South Korea. A statistical time series analysis was conducted with temporal variations of precipitation and groundwater level to estimate lag-time based on correlation coefficients calculated from auto-correlation function (ACF), cross-correlation function (CCF), and moving average (MA) at five sites. Landform and land-use/cover within 250 m radius of the monitoring wells(GW01, GW02, GW03, GW04, and GW05) at five sites were identified by land cover and digital map using Arc-GIS software. Long lag-times (CCF: 42-71 days and MA: 148-161 days) were calculated at the sites covered by mainly impermeable surfaces(GW01, GW03, and GW05) while short lag-times(CCF: 4 days and MA: 67 days) were calculated at GW04 consisting of mainly permeable surfaces. The results suggest that lag-time would be one of the good indicators to evaluate the effects of land-use/cover on estimating groundwater recharge. The results of this study also provide guidance on the application of statistical time series analysis to environmentally important issues on creating an urban green space for natural groundwater recharge from precipitation in the city and developing a management plan for hydrological disaster prevention.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.93-99
• /
• 2019

The purpose of this study was to investigate the bond strength between PEKK(Polyetherketoneketone) and Sinfony(3M ESPE, Seefeld, Germany) the dental composite resin by proposing the three representative surface treatment methods and evaluate to see if they affect the bond strength between two materials. A total of 30 PEKK($Pekkton^{(R)}$ Ivory, $Cendres+M{\acute{e}}taux$, Bienne, Switzerland) specimens were prepared, embedded in acrylic resin, polished(P 1200 grid) to surface, and each group was divided into 10 specimens. After then, by the surface treatment method, it classified into three groups(n=10) such as Air abrasion group(PN), applying Single Bond Universal(3M ESPE) after Air abrasion(PB), applying OPAQUE(3M ESPE) after Air abrasion(PO). Then, veneering was performed by using Sinfony(3M ESPE, Seefeld, Germany). All completed specimens were allowed to rest in a $37^{\circ}C$ water bath for 24 hours. Shear bond strength of each group was measured and fracture patterns were classified. Statistic analysis was performed with One-way ANOVA followed by post hoc Scheffe tast (p<.05). Statistical analysis was performed using the SPSSWIN 21.0 program. As a result of one-way ANOVA, the average value of PB group was $27.67{\pm}4,18MPa$ and it was shown as the highest bond strength, PN and PO were $20.43{\pm}1.70$ and $19.8{\pm}4.77MPa$ each, and these were relatively low(F=18.4, P<.001), and as the post-test the Scheffe test was conducted and verified (p<.05). After examining the scheffe test, it was showed significant differences as PB>PO, PB>PN(p<.001). Through this study, in order to enhance the bonding force between PEKK and the composite resin, perform the Air abrasion and surface treatment by using Single Bond Universal(3M ESPE) is recommended, and as coMPared with other studies. And it is assumed that the increase of the application time of the Air abrasion affects the increase of the shear bond strength. Thus, further research is required.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.159-201
• /
• 2019

Along with Annex 14 Volume I establishment in 1951 and the set-up of restriction surface around the runway, aeronautical technique and navigation performance achieved dazzling growth, and the safety and precision of navigation greatly improved. However, restrictions on surrounding obstacles are still valid for safe operation of an aircraft. Standards and criteria for securing safety of aircraft operating around and on airport is stated in Annex 11 Air Traffic Services and Annex 14 Aerodrome etc. In particular, Annex 14 Volume I presents the criteria for limiting obstacles around an airport, such as natural obstacles such as trees, mountains and hills to prevent collisions between aircraft and ground obstacles, and artificial obstacles such as buildings and structures. On the other hand, Annex 14 Volume I, in the application of the obstacles limitation surfaces, apply the exception criteria, as it may not be possible to remove obstacles that violate the criteria if the aeronautical study determines that they do not impair the safety and regularity of aircraft operation. Aeronautical study has been applied and implemented in various countries including United States, Canada and Europe etc. accordingly, Korea established and amended some provisions of the Enforcement rules of the Aviation Act and established the Aeronautical study guidelines to approve exceptions. However, because ICAO does not provide specific guidelines on procedures and methods of Aeronautical study, countries conducting aeronautical study have established and applied their own procedures and methods. Reflecting this realistic situation, at the 12th World Navigation Conference and at the 38th General Assembly, the contracting States demanded a reexamination of the criteria for current obstacle limitation surfaces and methods of aeronautical study, and the ICAO dedicated a team of experts to prepare new standard. This study, in line with the movement of international change in obstacle limitation surface and aeronautical study, aims to compare and analyze current domestic and external standards on obstacle limitation and height limits, while looking at methods, procedure and systems for aeronautical study. In addition, expecting that aeronautical study will be used realistically and universally in assessing the impact of obstacles, we would recommend the institutional improvement of the aeronautical study along with the development of quantitative analysis methods using the navigation data in the current aeronautical study.