• Archives of design research
• /
• v.17 no.2
• /
• pp.335-350
• /
• 2004

Design takes concrete form from the things which are not yet exist to the molded reality. Creation of value which is accompanied by the rational value could be possible only through the searching examination of the basic concept. All designs are under circumstances because the results and the character of the problems are different under the given conditions and circumstances which are the characteristic of the design. The aim of this study is searching for the differential design conce- pt which is the most appropriate and reasonable in the basic design process in which the phase of the analysis, synthesis and evaluation of the problem. First of all the pursuit value of the times and the change of the view point of value of the product design. How the pursuit value of times were searched and analyzed. Analyze the successful product design realization of the typical trend of the modern design which are 3-2. function-focused design, 3-3. emotion-centered design, 3-4. image communicative design through the metaphor, 3-5. environmental affinity design. On the base of the case analysis how to apply the differential design concept which is coming as a trend in the future society which are sustainable developing society was examined closely. The outcome through the analysis of the success cases are as follows, \circled1 the value of the spirit of the times should be emphasized as the design image, \circled2 environmental appropriateness should be taken into consideration as the first primary factor, \circled3 the realization of value of the fulfillment of differential consumer's needs, \circled4 lead to prolong the life cycle of the product, \circled5 promote the sustaining growth of enterprise, \circled6 user-centered product value should be the first consideration. \circled7 It is necessary to overcome the cultural andinguistic barriers and to reflect the metaphor which people remember well. \circled8 The application of human's true character should be decided beforehand. It is the commonness of values of times and customs. \circled9 The differentiated design concept which meets our mental satisfaction, not material one, will be required. In addition to this the creative and differentiated design concepts which are accompanied by the good design factor under the base of product could achieve the emotional consensus from the consumers. That is, the value of all designs should be estimated by the base of the humanism ' The human beings are the barometer of all things".ngs".uot;.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.1
• /
• pp.104-111
• /
• 2007

As protein content of milled rice, generally used as a benchmark for rice eating quality, is greatly affected by N fertilization and nutrition status of rice plant, understanding its response to nitrogen rate and plant nitrogen status at different growth stage is important for recommending N fertilizer management for high quality rice production. The responses of milled-rice protein content were compared and quantified under various combinations of basal+tillering and panicle N application levels in 2001 and 2002. Protein content of milled rice was ranged from 6 to 9%, increasing significantly with increasing basal+tillering and panicle N rates. However, milled rice protein content was raised much greater by panicle N than by basal+tillering N fertilization. Even though basal+tillering N increased up to 20 kg/ha, protein content of milled rice was observed less than 7% in case that panicle N was applied below 1.8 kg/10a. Regression analysis revealed that nitrogen accumulated until harvest was partitioned with almost constant rates of 58.3% and 46.5% to panicle and milled rice, respectively. The partitioning rates was slightly but not significantly different between experimental years. Protein content of milled rice showed linear and quadratic responses to the shoot N accumulation until panicle initiation stage (PIS) ant shoot nitrogen accumulation from PIS to harvest, respectively. The increment of milled-rice protein content per unit N increase was much greater in shoot N accumulation from PIS to harvest than in that until PIS. Regardless of shoot N accumulation until PIS upto 8 kg/10a, protein content of milled rice was lower than 7% and ranged from 6.5 to 7.5% in case that shoot N accumulation from PIS to harvest was below 3.0 kg/10a and below 6.0 kg/10a respectively. It would be concluded that even under the same N accumulation until harvest milled rice protein content could be different according to the N fertilizer management and weather condition especially during ripening, providing rooms for controlling protein content by N fertilizer management without damage to grain yield.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.1
• /
• pp.237-257
• /
• 2005

It was to study as a following-research of "A Case Study on Center of Gravity(COG) Analysis when Performing Uchimata(inner thigh reaping throw) by Posture and Voluntary Resistance Levels(VRL) of Uke in Judo[I]". The purpose of this study was to analyze the COG variables when performing uchimata(inner thigh reaping throw) by two postures and voluntary resistance levels(VRL) of uke(reciver) in Judo. The subjects, who were one male judoka(YH) for 1992 Barcelona Olympic Games Olympian(silver medalist), and one male trainee; Y.I.University representative member (SDK), and were filmed on two S-VHS 16mm video cameras(60fields/sec.) through 3-dimensional motion analysis methods, that postures of uke were shizenhontai (straight natural posture) and jigohontai(straight defensive posture), VRL of uke were 0% and 100%, respectively. The kinematical variable was COG variable, distance of COG, and distance of resultant COG between uke and tori(the thrower), velocity and acceleration of COG. The data of this study collection were digitized by SIMI Motion Program computed the mean values and the standard deviation calculated for each variables. When performing uchinmata according to each posture and VRL of uke and classifying. From the data analysis and discussion, the conclusions were as follows : 1. Displacement of COG Subject YH, COG was the highest in kuzushi(balance -breaking), vertical COG was low when following in tsukuri(positioning; set-up), kake(application; execution), and COG was pattern of same character each postures and resistance, respectively. Subject SDK, COG was low from kumikata(engagement positioning) to kake, and COG was that each postures and resistance were same patterns, respectively. Subject YH, SDK, each individual, postures and resistance, vertical COG was the lowest in kake phase, when performing. 2. Distance of COG between uke and tori The distance of COG between uke and tori when performing, subject YH was $0.64{\sim}0.70cm$ in kumikata, $0.19{\sim}0.28cm$ in kake, and SDK was $0.68{\sim}0.72cm$ in kumikata, $0.30{\sim}0.42\;cm$ in kake. SDK was wider than YH. 3. Distance of resultant COG between uke and tori The distance of resultant COG between uke and tori when performing, subject YH was $0.27{\sim}0.73cm$ from kumikata to kake. and SDK was $0.14{\sim}0.34cm$ in kumikata, $0.28{\sim}0.65cm$ in kake. Jigohontai(YH:$0.43{\sim}0.73cm$,SDK:$0.59{\sim}0.65cm$) was more moved than shizenhontai(YH:$0.27{\sim}0.53cm$, SDK: $0.28{\sim}\;0.34cm$). 4. Velocity of COG The velocity of COG when performing uchimata, subject YH was fast anterior-posterior direction in kuzushi, ant.-post. and vertical direction fast in tsukuri and kake. SDK was lateral, ant.-post. and vertical direction in kuzushi, ant.-post. and vertical direction in tsukuri and ant.-post. direction in take, respectively. 5. Acceleration of COG The acceleration of COG when performing uchimata, The trend of subject YH was showed fast vertical direction in kuzushi and tsukuri, ant.-post. and vertical direction fast in kake. The trends of SDK showed lateral direction in kuzushi, lateral and ant.-post. direction in tsukuri and ant.-post. direction in kake, respectively.

• Journal of Chest Surgery
• /
• v.42 no.3
• /
• pp.292-298
• /
• 2009

Background: Surgery for mitral valve disease in children carries both technical and clinical difficulties that are due to both the wide spectrum of morphologic abnormalities and the high incidence of associated cardiac anomalies. The purpose of this study is to assess the outcome of mitral valve surgery for treating congenital mitral regurgitation in children. Material and Method: From 1997 to 2007, 22 children (mean age: 5.4 years) who had congenital mitral regurgitation underwent mitral valve repair. The median age of the patients was 5.4 years old and four patients (18%) were under 12 months of age. 15 patients (68%) had cardiac anomalies. There were 13 cases of ventricular septal defect, 1 case of atrial septal defect and 1 case of supravalvar aortic stenosis. The grade of the preoperative mitral valve regurgitation was II in 4 patients, III in 15 patients and IV in 3. The regurgitation was due to leaflet prolapse in 12 patients, annular dilatation in 4 patients and restrictive leaflet motion in 5 patients. The preoperative MV Z-value and the regurgitation grade were compared with those obtained at follow-up. Result: MV repair was possible in all the patients. 19 patients required reduction annuloplasty and 18 patients required valvuloplasty that included shortening of the chordae, papillary muscle splitting, artificial chordae insertion and cleft closure. There were no early or late deaths. The mitral valve regurgitation after surgery was improved in all patients (absent=10, grade I=5, II=5, III=2). MV repair resulted in reduction of the mitral valve Z-value ($2.2{\pm}2.1$ vs. $0.7{\pm}2.3$, respectively, p<0.01). During the mid-term follow-up period of 3.68 years, reoperation was done in three patients (one with repair and two with replacement) and three patients showed mild progression of their mitral reguration. Conclusion: our experience indicates that mitral valve repair in children with congenital mitral valve regurgitation is an effective and reliable surgical method with a low reoperation rate. A good postoperative outcome can be obtained by preoperatively recognizing the intrinsic mitral valve pathophysiology detected on echocardiography and with the well-designed, aggressive application of the various reconstruction techniques.

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.61-73
• /
• 2014

This study reviewed an application of water quality estimation using an Airborne Hyperspectral Imagery (A-HSI) and tested a part of Han River water quality (especially suspended solid) estimation with available in-situ data. The estimation of water quality was processed two methods. One is using observation data as downwelling radiance to water surface and as scattering and reflectance into water body. Other is linear regression analysis with water quality in-situ measurement and upwelling data as at-sensor radiance (or reflectance). Both methods drive meaningful results of RS estimation. However it has more effects on the auxiliary dataset as water quality in-situ measurement and water body scattering measurement. The test processed a part of Han River located Paldang-dam downstream. We applied linear regression analysis with AISA eagle hyperspectral sensor data and water quality measurement in-situ data. The result of linear regression for a meaningful band combination shows $-24.847+0.013L_{560}$ as 560 nm in radiance (L) with 0.985 R-square. To comparison with Multispectral Imagery (MSI) case, we make simulated Landsat TM by spectral resampling. The regression using MSI shows -55.932 + 33.881 (TM1/TM3) as radiance with 0.968 R-square. Suspended Solid (SS) concentration was about 3.75 mg/l at in-situ data and estimated SS concentration by A-HIS was about 3.65 mg/l, and about 5.85mg/l with MSI with same location. It shows overestimation trends case of estimating using MSI. In order to upgrade value for practical use and to estimate more precisely, it needs that minimizing sun glint effect into whole image, constructing elaborate flight plan considering solar altitude angle, and making good pre-processing and calibration system. We found some limitations and restrictions such as precise atmospheric correction, sample count of water quality measurement, retrieve spectral bands into A-HSI, adequate linear regression model selection, and quantitative calibration/validation method through the literature review and test adopted general methods.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.1
• /
• pp.77-85
• /
• 2013

Purpose: The accurate movement of gantry rotation, collimator and correct application of dose rate are very important to approach the successful performance of Volumetric Modulated Arc Therapy (VMAT), because it is tightly interlocked with a complex treatment plan. The interruption and restart of dose delivery, however, are able to occur on treatment by various factors of a treatment machine and treatment plan. If unexpected problems of a treat machine or a patient interrupt the VMAT, the movement of treatment machine for delivering the remaining dose will be restarted at the start point. In this investigation, We would like to know the effect of interruptions and restart regarding dose delivery at VMAT. Materials and Methods: Treatment plans of 10 patients who had been treated at our center were used to measure and compare the dose distribution of each VMAT after converting to a form of digital image and communications in Medicine (DICOM) with treatment planning system (Eclipse V 10.0, Varian, USA). We selected the 6 MV photon energy of Trilogy (Varian, USA) and used OmniPro I'mRT system (V 1.7b, IBA dosimetry, Germany) to analyze the data that were acquired through this measurement with two types of interruptions four times for each case. The door interlock and the beam-off were used to stop and then to restart the dose delivery of VMAT. The gamma index in OmniPro I'mRT system and T-test in Microsoft Excel 2007 were used to evaluate the result of this investigation. Results: The deviations of average gamma index in cases with door interlock, beam-off and without interruption on VMAT are 0.141, 0.128 and 0.1. The standard deviations of acquired gamma values are 0.099, 0.091, 0.071 and The maximum gamma value in each case is 0.413, 0.379, 0.286, respectively. This analysis has a 95-percent confidence level and the P-value of T-test is under 0.05. Gamma pass rate (3%, 3 mm) is acceptable in all of measurements. Conclusion: As a result, We could make sure that the interruption of this investgation are not enough to seriously affect dose delivery of VMAT by analyzing the measured data. But this investigation did not reflect all cases about interruptions and errors regarding the movement of a gantry rotation, collimator and patient So, We should continuously maintain a treatment machine and program to deliver the accurate dose when we perform the VMAT for the many kinds of cancer patients.

• The Journal of Industrial Distribution & Business
• /
• v.2 no.2
• /
• pp.15-24
• /
• 2011

Modern enterprises should concentrate their efforts on continuous improvements in focusing their development in the core areas of business and to reduce their expenses and to enhance the quality of service for customers. The enterprises should focus on their core business while outsourcing the non-core areas of business to external specialists for the purpose of reducing cost. In South Korea, the enterprises are becoming increasingly interested in outsourcing their logistics function, especially in using IT technologies to the 3PL. The underlying reason for this trend is because the logistics costs of Korean businesses are much higher than that of other advanced countries. This higher logistic costs weakens the price competitiveness of Korean companies in the overseas export markets and even dampening the balance of international trade. Domestically, the higher logistics costs have the effect of raising prices in the local markets and thus affecting the local economy. Therefore a solution is urgently needed to save the logistics costs for the Korean companies in the interest of increasing national competitiveness. Outsourcing to the 3PL is becoming an attraction solution to this problem. Thanks to the increasing supply of professional logistics companies, many of the enterprises are switching to the Third Party Logistics. Nevertheless the enterprises do not yet utilize the integrated third-party logistics services on a full scale. This study analyzes present conditions and problems of the domestic third-party logistics market and suggests directions for future development. To solve the problems in the domestic third-party logistics market, four actions are recommended. First there should be new supporting policies in the laws and regulations and a system for small and medium sized companies to grow. Solutions to structural problems such as abnormal multilevel merchandising, illegal operation of private cars, and freight dumping should be implemented concurrently. Furthermore, standards for new companies entry into the market should be enhanced to allow only the competitive distribution companies to enter the market. Second, development of variety of educational programs is needed through establishing human-resource development system and specialized formal educational institution focused on this market. Third, the third party distribution companies, which seek long-term relationships with the owners of goods, should endeavor to strengthen their communications capability. Fourth, adoption of high-tech distribution system and the advent of U-Logistics, making use of RFID is urgent. This study has the limitation of objectivity because it does not include various comparative case studies about companies relating to the Third Party Logistics and domestic franchise companies. However, this study is significant to the extent that it analyzes the general present conditions and the problems of domestic Third Party Logistics and suggests recommendations for revitalization of Third Party Logistics. For future studies, analyzing the successful cases of international third party logistics companies' empirical data and studying the application into domestic franchise companies would improve the objectivity of the results. This would assist the domestic third party logistics companies not only to perform excellent domestic logistics function but also to enter into the global market for international logistics.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.41 no.5
• /
• pp.78-90
• /
• 2013

The purpose of this study was to analyze the types and characteristics of public complaints caused by the landscape architecture projects in the case of apartment complex. Furthermore, its purpose was also to propose as the basis data for the minimization of complaints in the course of future landscape architecture projects. To analyze and categorize the apartment complex civil complaints, we collected basic and case study data from LH Corporation, SH Corporation and GICO from 2009 to 2012. We also categorized 672 landscape complaints to 73 categories and conducted a survey from residents and landscape architecture. This Survey is to use IPA can collect character(public-private), handling of civil affair(easy-hard) and analyze typical characters and difference of civil complaint awareness between landscape architecture and residents. First, we were categorized 73 civil complaints by type in 5 categories such as park, green space and street trees, pedestrian road, facilities, and others. Second, the most common landscape complaints appear in green spaces, street trees, facilities, pedestrian roads and park orders. Third, results of the analysis conducted for each item which are publicity and measures the ease. 'Facilities', 'landscape and greenery', 'pedestrian road' and others were commonly appears from residents and professional awareness of the complaints. However, complaints of park appear different awareness between landscape architecture and residents. Fourth, 35 from 73 civil complaints(47.9%) are having high publicity and easy to measure, 25 civil complaints(34.2%) has analyzed to individual and difficult to measure so about the these complaints need to check from the design step so that it is necessary to minimize the problem of additional expense by civil complaints burden and decrease the confidence of residence problem were considered.

• Journal of Chest Surgery
• /
• v.37 no.4
• /
• pp.322-327
• /
• 2004

Coronary artery bypass grafting on the beating heart is no longer a new methods for any cardiac surgeon. We evaluated the application of the off-pump coronary artery bypass procedure relative to safety and efficiency as measured by postoperative complication and operative mortality. Material and Method: We used our retrospective database to compare the patients having off-pump coronary surgery (n=100) with those having on-pump coronary surgery (n=100) between June, 1999 and August, 2002. Patients whom underwent associated valvular or aortic aneurysmal operation were excluded. Result: Neither groups showed any differences in the patient's risk factors and extent of coronary disease. Off-pump CABG group did not have significantly less mean operation time (295$\pm$73 min vs 323$\pm$83 min, p=ns) and mean hospital day (15.34$\pm$6.02 day vs 13.80$\pm$4.95 day, p=ns). However, off-pump CABG group had significantly shorter mean ventilation time (17.3$\pm$11.27 hour vs 24.98$\pm$16.1 hour, p＜0.05). No patients were converted to on-pump CABG in off-pump CABG. Intraoperative hemodynamic instability in off-pump CABG were 6 cases, of whom 2 cases were in lateral wall approach and 4 cases in right coronary anastomosis. Postoperative mortality was 1 case in off-pump CABG and 2 cases in on-pump CABG. Intra-aortic ballon pump (IABP) was applied in 1 case with off-pump CABG and in 2 cases with on-pump CABG. No patients presented postoperative cerebral infarction ＆ stroke in off-pump CABG but 2 patients in on-pump CABG. Postoperative arrhythmia presented in 4 cases with off-pump CABG and in 6 cases with on-pump CABG. Acute renal failure (ARF) was complicated in 3 cases with off-pump CABG and in 2 cases with on-pump CABG. Conclusion: This study documented the immediate safety and efficiency of the off-pump CABG procedure.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.258-292
• /
• 1996

In the last year great interest appears to YBCO thin films preparation on different substrate materials. Preparation of epitaxial film is a very difficult problem. There are many requirements to substrate materials that must be fullfilled. Main problems are lattice mismatch (misfit) and similarity of structure. From paper [1] or follows that difference in interatomic distances and angles of substrate and film is mire important problem than similarity of structure. In this work we present interatomic distances and angle relations between substrate materials belonging to ABCO4 group (where A-Sr or Ca, B-rare earth element, C-Al or Ga) of different orientations and YBCO thin films. There are many materials used as substrates for HTsC thin films. ABCO4 group of compounds is characterized by small dielectric constants (it is necessary for microwave applications of HTsC films), absence of twins and small misfit [2]. There most interesting compounds CaNdAlO4, SrLaAlO4 and SrLaGaO4 were investigated. All these compounds are of pseudo-perovskite structure with space group 14/mmm. This structure is very similar to structure of YBCO. SLG substrate has the lowest misfit (0.3%) and dielectric constant. For preparation of then films of substrates of this group of compound plane of <100> orientation are mainly used. Good quality films of <001> orientations are obtained [3]. In this case not only a-a misfit play role, but c-3b misfit is very important too. Sometimes, for preparation of thin films substrates of <001> and <110> orientations were manufactured [3]. Different misfits for different YBCO faces have been analyzed. It has been found that the mismatching factor for (100) face is very similar to that for (001) face so there is possibility of preparation of thin films on both orientations. SrLaAlO4(SLA) and SrLaGaO4(SLG) crystals of general formula ABCO4 have been grown by the Czochralski method. The quality of SLA and SLG crystals strongly depends on axial gradient of temperature and growth and rotation rates. High quality crystals were obtained at axial gradient of temperature near crystal-melt interface lower than 50℃/cm, growth rate 1-3 mm/h and the rotation rate changing from 10-20pm[4]. Strong anisotropy in morphology of SLA and SLG single crystals grown by the Czochralski method is clearly visible. On the basics of our considerations for ABCO4 type of the tetragonal crystals there can appear {001}, {101}, and {110} faces for ionic type model [5]. Morphology of these crystals depend on ionic-covalent character of bonding and crystal growth parameters. Point defects are observed in crystals and they are reflected in color changes (colorless, yellow, green). Point defects are detected in directions perpendicular to oxide planes and are connected with instability of oxygen position in lattice. To investigate facets formations crystals were doped with Cr3+, Er3+, Pr3+, Ba2+. Chromium greater size ion which is substituted for Al3+ clearly induces faceting. There appear easy {110} faces and SLA crystals crack even then the amount of Cr is below 0.3at.% SLG single crystals are not so sensitive to the content of chromium ions. It was also found that if {110} face appears at the beginning of growth process the crystal changes its color on the plane {110} but it happens only on the shoulder part. The projection of {110} face has a great amount of oxygen positions which can be easy defected. Pure and doped SLA and SLG crystals measured by EPR in the<110> direction show more intensive lines than in other directions which allows to suggest that the amount of oxygen defects on the {110} plane is higher. In order to find the origin of colors and their relation with the crystal stability, a set of SLA and SLG crystals were investigated using optical spectroscopy. The colored samples exhibit an absorption band stretching from the UV absorption edge of the crystal, from about 240 nm to about 550 m. In the case of colorless sample, the absorption spectrum consists of a relatively weak band in the UV region. The spectral position and intensities of absorption bands of SLA are typical for imperfection similar to color centers which may be created in most of oxide crystals by UV and X-radiation. It is pointed out that crystal growth process of polycomponent oxide crystals by Czochralski method depends on the preparation of melt and its stoichiometry, orientation of seed, gradient of temperature at crystal-melt interface, parameters of growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth (rotation and pulling rate) and control of red-ox atmosphere during seeding and growth. Growth parameters have an influence on the morphology of crystal-melt interface, type and concentration of defects.