• Journal of Conservation Science
• /
• v.37 no.5
• /
• pp.426-439
• /
• 2021

In this study, we compare the properties and estimate the durability of five oil colors that are the most popularly used colors in the conservation of oil paintings. A set of these colors was obtained form four manufacturers each, and their properties were analyzed by conducting deterioration experiments. Subsequently, we observed the colors and performed X-ray fluorescence analysis. As a result of colour observation and XRF analysis, it was confirmed that there are the differences according to the pigment types, mixing rations and the manufacturers even for colors having the same product name. The deterioration test indicated differences in the appearance of the colors ; for instance, the color difference was above 12.0 in most of the samples, including restoration color and acrylic gouache. In the case of Lemon Yellow a lot of discoloration and cracking occurred, and difference in gloss was ob served in Viridian of manufacturer C. Most cracks were ob served in the restoration color obtained from manufacturer B and were assumed to be because of the resin used by the manufacturer. Nevertheless, additional research will have to be conducted by controlling variables in order to find out the cause. Through this study, we demonstrated that retouching materials for conservation of oil painting differed in their physical properties according to the color and manufacturer. Therefore a conservator should be mindful during the selection and use of materials for retouching oil paintings.

• Korean Journal of Breeding Science
• /
• v.42 no.4
• /
• pp.407-412
• /
• 2010

Recently, peoples are greatly concerned with global temperature change because global warming can be a potential serious effect on agriculture production such as yield reduction and poor grain quality. On the other hand, it can bring some beneficial effects through twice cultivation of rice in temperate region. In order to overcome this situation, we developed extremely early-maturing rice 'Milyang255' which heading date was similar with 'Jinbuolbyeo'. Based on agronomic characteristics of 'Milyang255', it has very short stature as 65 cm of culm length and slightly lower spikelets number per panicle compared with that of 'Jinbuolbyeo'. However, the grain appearance, palatability and other items were better than those of 'Jinbuolbyeo' in panel test of cooked rice. The milled rice yield of 'Milyang255' is 3.94 MT/ha at the early transplanting. Especially, its grain filling rate was higher and faster than Jinbuolbyeo and the head rice ratio in milled rice was also higher. Thus, 'Milyang255' can efficiently reduce the growth duration of rice cultivation and also be useful material for research on twice cultivation of rice in Korea.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.592-599
• /
• 2019

This study is to stabilize insoluble and unstable active ingredient which is Idebenone (INCI name: hydroxydecyl ubiquinone) in a multi-lamellar vesicle (MLV) and to stabilize it in the skin care cosmetics. Idebenone is good effective raw material in the treatment of Alzheimer's disease in the medical field and a powerful antioxidant in dermatology. It is well known as a substance that inhibits the formation of melanin and cleans the skin pigment. However, it did not dissolve in any solvent and it was difficult to apply in cosmetic applications. Niosome vesicle was able to develop a nano-particle by making a multi-layer of idebenone encapsulated with a nonionic surfactant, hydrogenated lecithin and glycine soja (soybean) sterols and passing it through a high pressure microfluidizer. Idebenone niosome vesicle (INV) has been developed to have the ability to dissolve transparently in water and to promote transdermal penetration. The appearance of the INV was a yellowish liquid having specific odor, and the particle size distribution of INV was about 10~80 nm. The pH was 5~8 (mean=6.8). This capsulation with idebenone was stored in a $45^{\circ}C$ incubator for 3 months and its stability was observed and quantitatively measured by HPLC. As a result, the stability of the sample encapsulated in the niosome vesicle (97.5%) was about 66.3% higher than that of the non-capsule sample of 32.5%. Idebenone 1% INV was used for the efficacy test and clinical trial evaluation as follows. The anti-oxidative activity of INV was 38.2%, which was superior to that of 12.8% tocopherol (control). The melanin-reducing effect of B16 melanoma cells was better than INV (17.4%) and Albutin (control) (9.6%). Pro-collagen synthesis rate was 128.2% for INV and 89.3% for tocopherol (control). The skin moisturizing effect was 15.5% better than the placebo sample. The elasticity effect was 9.7% better than the placebo sample. As an application field, INV containing 1% of idebenone is expected to be able to develop various functional cosmetic formulations such as skin toner, ampoule essence, cream, eye cream and sunblock cream. In addition, it is expected that this encapsulated material will be widely applicable to emulsifying agents for skin use in the pharmaceutical industry as well as the cosmetics industry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.133-138
• /
• 2019

This study evaluated the tensile properties of SAPH440, a hot-rolled steel for automotive structural applications, based on GMAW lap welding, the welding current, the welding voltage, and the feed rate. Tensile tests were performed according to the joint parameters of the GMAW process, for which specimens were fabricated according to KS B ISO 9018 by lap welding. The bead appearance was observed in each condition, and the weldability was evaluated by the tensile test. Higher the welding current resulted in a deeper weld, but the tensile strength was not significantly different from when the parameter was fixed due to the fracture of the base material. When the current was higher than the voltage, as in the case of a welding current of 200 A and welding voltage of 17 V, a large amount of spatter is generated, the welding is unstable, and the welded part breaks. Higher the voltage resulted in the bead not causing defects in general, and it also affected the weldability. If the current and voltage were too low, the welding was not performed normally, and the tensile strength could not be measured. However, as the current increased, the increase of the voltage and the feed rate did not affect the tensile strength.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.59-66
• /
• 2019

Small bridges carry out only general inspections based on visual inspection. The Bridges with more than 30 years of public use need to be decided on whether or not they will be reconstruction according to aging. However, there are some situations that need to be determined only by appearance condition, which is insufficient in terms of safety maintenance. In this paper, the condition evaluation and the load carrying capacity evaluation were carried out for aged small bridges. A comparison of the evaluation results was conducted to examine the appropriateness of the maintenance related to the decision making of the reconstruction. As a result of reviewing, two of the bridges showed that there are no abnormality in the safety of the state evaluation, but the load capacity were insufficient. Thus evaluation the safety and performing the reconstruction decision of aged small bridges by visual inspection alone with may cause problems. Therefore, it is necessary to carry out additional research on the ambient measurement and load carrying capacity evaluation for the maintenance of the bridges, and to supplement it through application of the bridge management system.

• Journal of the Korean Institute of Gas
• /
• v.22 no.6
• /
• pp.44-51
• /
• 2018

As the LNG storage tank is aged, if there is a crack in the outer wall concrete or corrosion of the reinforcing steel, there is a risk of a major accident such as collapse of the structure depending on the type and degree of damage. Since 2014, LNG storage tanks have undergone precise safety diagnosis and safety inspection has been carried out. The condition evaluation criteria for each component have been revised and applied in January 2016. The condition evaluation standard is to evaluate the status of storage tanks based on the appearance survey and material test results of LNG storage tanks and it is important for maintenance. In addition, the representative condition evaluation standard that shows the comprehensive state of each LNG storage tank is important in maintenance, but the related standard for LNG storage tank outer concrete is not available in Korea and abroad, and development of the condition evaluation standard is necessary. In this paper, we examined the structural characteristics of LNG storage tanks, analyzed the status of the condition evaluation criteria for each member, and developed a comprehensive status rating system by weighting the members. We used the AHP(Analytic Hierarchy Process) technique and developed a representative conditon evaluation criteria through surveys of professional organizations.

• Food Engineering Progress
• /
• v.21 no.1
• /
• pp.64-71
• /
• 2017

This study investigated the effects of the mixing ratio of tofu paste and normal corn starch on the characteristics of gluten-free (GF) muffins. Soft wheat flour for wheat flour-based muffins (control) was replaced with the mixture of tofu paste and normal corn starch (NCS). The mixing ratios of tofu paste and NCS were 1:6.4 (S100), 1:5.1 (S80), 1:3.8 (S60), 1:2.6 (S40), 1:1.3 (S20), and 1:0 (S00), based on their total solid contents. GF muffins of S40-S100 developed the porous, sponge-like structure without crumb collapse. The weight and baking loss did not significantly differ in the control and GF muffins. By decreasing NCS in GF muffin batters, the moisture content, firmness, and crumb redness/yellowness of GF muffins increased, while their volume, specific volume, and crumb lightness decreased. Nevertheless, these characteristics (except for firmness) of S100 were much closer to those of the control. In the preference test, however, S60 (possessing lower attributes than S100 and S80) was most favored among GF muffins, and was very similar in all evaluations (except for appearance) to the control. Overall, the mixture of tofu paste and NCS would be a potential material to replace soft wheat flour in muffins.

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.379-388
• /
• 2020

The purpose of this study are to develop the TEP activity for learning experimental apparatus at elementary school and to test the effects of the TEP activity. This study consists of two steps. First through literature research on the difficulties and needs of experimental apparatus education developed the form that how to educate the experimental apparatus at elementary school. Second, applied the TEP activity and figured out the effects as two aspect(knowledge about experimental apparatus and actual using skill during lesson). This worksheet was applied to 3rd grade students in elementary school about 4 experimental apparatuses(Beaker, Electronic scale, Glass rod, Spatula). The results of this study are as follows: There is no specific time to teach what is and how to use experimental apparatus by regular curriculum. So many students and teachers need method and time to learn them. Also they want to lots of opportunities to use them. With that needs given previously, TEP activity developed by 3 steps. 1. Trigger interest 2. Explore experimental apparatus: learned knowledges about experimental apparatus focused on appearance(name, purpose, directions for use, precautions) 3. Practice experimental apparatus: actual using time to acquire skills. After that did the survey of knowledge and observation of students' behavior during usual class to confirm the effects. According to the results, TEP activity helped the students to improve there awareness of the experimental apparatus and actual using skills.

• Korean Journal of Food Science and Technology
• /
• v.53 no.3
• /
• pp.321-328
• /
• 2021

Brownies containing whey powder (WP) with different levels of substitutions for wheat flour (0, 10, 20, 30, and 40% substitution for WP 0, WP 10, WP 20, WP 30, and WP 40, respectively) were prepared, and their properties were compared. Regarding appearance, the collapse of the sample surface noticeably started from WP 30. The moisture content was higher in samples containing WP than in the control (WP 0), and the weight of the brownie increased with WP content. As the WP amount increased, both the total and specific volumes of the brownies decreased. Regarding texture, a higher amount of WP resulted in a decrease in hardness, whereas adhesiveness increased significantly. The antioxidant activity also increased with increasing WP amount (from 35.28 to 51.47%). Regarding sensory characteristics, 20 or 30% WP in brownies increased mouth-feel properties, taste, and overall preference. Based on the above results, WP could improve the quality of brownies, and a substitution level of 20% could be the most appropriate.

• Korean Journal of Clinical Laboratory Science
• /
• v.53 no.1
• /
• pp.1-10
• /
• 2021

Radiopharmaceuticals are drugs that contain radioisotopes and are used in the diagnosis, treatment, or investigation of diseases. Radiopharmaceuticals must be manufactured in compliance with good manufacturing practice regulations and subjected to quality control before they are administered to patients to ensure the safety of the drug. Radiopharmaceuticals for administration to humans need to be sterile and pyrogen-free. Hence, sterility tests and membrane filter integrity tests are carried out to confirm the asepticity of the finished drug product, and a bacterial endotoxin test conducted to assess contamination, if any, by pyrogens. The physical appearance and the absence of foreign insoluble substances should be confirmed by a visual inspection. The chemical purity, residual solvents, and pH should be evaluated because residual by-products and impurities in the finished product can be harmful to patients. The half-life, radiochemical purity, radionuclidic purity, and strength need to be assessed by analyzing the radiation emitted from radiopharmaceuticals to verify that the radioisotope contents are properly labeled on pharmaceuticals. Radiopharmaceuticals always carry the risk of radiation exposure. Therefore, the time taken for quality control tests should be minimized and care should be taken to prevent radiation exposure during handling. This review discusses the quality control procedures and acceptance criteria for a diagnostic radiopharmaceutical.