• 패션비즈니스
• /
• 제24권6호
• /
• pp.80-88
• /
• 2020

This study, by analyzing previous studies, aimed to understand how 3D printing technology is applied and utilized in the fashion industry and to contribute to encouraging further studies on 3D printing technology in the fashion sector and suggesting proper ways for designing such studies. Firstly, 47 papers were selected from all literature concerning 3D printing technology published in 15 journals of fashion and design since 2013. Afterwards, these papers were analyzed with regard to the frequency, topics or sectors, and purposes or types of studies shown by outcomes. Results were as follows: First, the number of papers on 3D printing technology published in the journals was counted according to the year, which showed that this number increased rapidly after 2015 for about 3 years. Especially in the year 2016, this increase was quite notable. Although a little decrease in this number was found afterwards, a steady increase was highly expected. Out of the 8 journals, Journal of The Korean Society of Fashion Design had the maximum papers. Regarding areas of studies, works on designing and development of products were most common. Finally, regarding the purpose of studies, those suggesting or presenting apparel were predominant. Product items included clothes, shoes, and caps. Studies on caps mostly covered designing the products. Studies on clothes aimed at designing, characteristics of construction, and case study. However, there were very few works on 3D printing technology as an alternative material or composition of clothing.

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2012년도 제46차 학술발표회
• /
• pp.84-84
• /
• 2012

중동권 국가에서 판매되고 있는 차도르용 고가원단으로 Polyester/Acetate 교직물 제품이 있는데 이중에서 특히 Polyester/Diacetate 교직물은 더 높은 가격에 판매되고 있으며 현재 일본에서 거의 독점하고 있는 시장이다. 아세테이트 섬유는 열에 대하여 약하기 때문에 고온에서 염색을 하지 못하고 $80^{\circ}C$에서 염색하고 있으며, 염료도 소수성 염료인 분산염료를 사용하고 있다. 이러한 조건에서 섬유가 충분히 팽윤되지 못하여 염색이 잘 되지 않으며 잔액이 많이 남는 문제가 있다. 또한 염색에 사용하는 계면활성제 계통의 분산제를 사용할 경우 염료와 친화성이 크기 때문에 염료와 결합하여 염색을 저해하는 문제가 있다. 이러한 문제를 해결하기 위하여 계면활성제 계통의 분산제를 사용하는 대신 친수성 글리콜계 용제를 사용하여 염료의 가용화에 의해 단분자 상태로 만들어 소수성 섬유속으로 염료가 충분히 침투할 수 있는지 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.363-364
• /
• 2021

인공 지능 기술을 이용하여 검색 기술이 다양한 응용분야에 적용되고 있다. 고객의 성향 파악 및 개인 맞춤형 추천 시스템에 이르기까지 많은 부분에서 활용되고 있다. 본 연구에서는 일반적으로 입고 생활하는 복장을 중심으로 주로 어린이들이 생활하는 공간에서 성인 남성을 검출하는 시스템을 개발하고자 한다. 이를 통해 무단 침입한 성인의 위험한 상황을 사전에 방지할 수 있으며, 외부인 통제 시스템에 활용 가능할 것이다. 이러한 시스템을 개발하기 위해서 옷에 대한 정보를 활용하며, 옷의 색상, 패턴, 패션 스타일, 크기와 같은 다양한 요소를 활용하여 성인 검출 시스템을 개발한다.

• International Journal of Advanced Culture Technology
• /
• 제12권3호
• /
• pp.317-324
• /
• 2024

In terms of corporate sustainability management, the footwear industry is still at a very early stage compared to other sectors, and footwear, especially sneakers, is not as far along as apparel due to the nature of the product. As a result, there is a lack of research on sustainability in the sneaker industry in the academic community. Thus, this study analyzed the sustainability practices of three leading brands in the sneaker market, adidas, allbirds, and NIKE, in order to provide basic data for expanding sustainability in the sneaker industry. The study found that the characteristics of sustainable management in sneaker brands are economic efficiency, environmental circularity, social integration, and governance soundness. Sustainable management is increasingly recognized as an essential task in modern society, and as the sneaker market expands, the demand for CSM from relevant brands will grow accordingly. Therefore, the results of this study will help to set policy directions for sneaker brands pursuing sustainable management.

• 한국콘텐츠학회논문지
• /
• 제6권10호
• /
• pp.163-173
• /
• 2006

섬유 패션 산업은 소비자의 구매 욕구를 예측하여 제품을 개발하는 경우가 빈번하며, 예측이 잘못될 때는 즉 소비자들이 특정제품을 외면하는 경우 할인판매를 통해 제품을 처리해야 하는 문제점을 안고 있다. 반면에 신속대응 시스템은 소비자의 욕구를 지속적으로 관찰하여 신속하게 제품개발 및 생산일정을 수립함으로써 불필요한 재고가 쌓이는 경우를 사전에 방지할 수 있게 한다 소비자의 욕구는 POS 시스템에서 창출되는 자료를 통해 수집 분석되고 이런 소비자의 선호도는 네트워크를 통해 실시간으로 관련 제조업자에게 제공되어 제조업자들이 소비자의 선호도에 부합하는 제품을 개발, 생산, 제공할 수 있도록 해준다. 본 연구에서는 신속대응 시스템의 주요한 목표인 신기술의 접목을 통하여 의류제품의 기획, 구매, 생산, 유통과정 상의 재고 수준의 절감 및 과정 소요기간의 단축, 의류제조업자와 소매업자간의 보다 나은 협조체계의 개발, 소비자의 욕구에 적절히 대응하는 시스템을 학생들에게 교육할 수 있는 프로그램을 개발하였는데 신속대응 시스템을 위한 섬유 패션 스트림간 상품 기획 프로그램을 개발하였다.

• 복식
• /
• 제50권4호
• /
• pp.165-180
• /
• 2000

Since fashion is considered to be a cultural product and belongs to the formative art as well, the changes in fashion reflect those of society. Modern fashion has emerged from the period when people would follow the popular fashion uniformly, and moved toward the age of diversity, expressing not only the inner desires and aesthetic sensibility of individuals but also the freedom from formality and traditional restrictions. This kind of changes in expression became important motives for modern dress design following the present cultural phenomena, and, so called "outerwearization" of the undergarment or "infra apparel" exemplifies this situation. Corset especially has been playing a vital role in exaggerating and emphasizing the beauty of female body and correction of its shape. Today, one can frequently witness corset in street fashion along with brassier, Its sister concept. This "outerwearization" of the undergarment is supplanted as a syndrome, and it is defined as "supra syndrome" using "supra" as the opposite meaning to "infra". This unique phenomenon of modern fashion cannot be explained by a single social aspect, but as a mixed state of eroticism, fetishism, feminism, demonstrationists and expressionism among several current phenomena. The advent of "supra syndrome" and its cultural background were illustrated and stand-out "supra syndrome" exhibited by many world-renowned designers were analyzed in this study. As the result of study, six design pieces were developed and produced in three groups, based on different corset motifs. This study reaffirms that creativity of design is limitless and the imaginative abilities alone cannot accomplish higher level of design and development of works of fashion unless they are accompanied by the understanding of historical background, periodical circumstances and cultural phenomena. In this study, utilizing the modern apparatus such as computer and the advent of the modern technology was also found helpful in creative fashion design process.

• 복식
• /
• 제57권2호
• /
• pp.1-10
• /
• 2007

This study aims at the improvement of sewing function through understandings of dynamic property about the sewing methods and the thread material selection in knitwear. The tensile strength and shear of KES-FB and the Instron were measured for the analysis of the mechanical properties. The knit cloth was structured In the plain stitch, $1\times1$ rib stitch and $2\times1$ rib stitch with the combination of wool and cotton. With regard to the sewing method, intralooping and interlacing were applied. For thread materials, polyester, cotton, wool and silk were used. Since silk has the lowest extension and similar values regardless of its construction in intralooping, it is available knit apparel with uniform elastic recoverv. It also has small shearing resistance. It can be used in apparel which needs big mobility, but it causes rutting problem. Therefore, it is suitable to use intralooping. When the same sewing yarn and textile are use, it can lower shearing resistance and extension in intralooping, Since wool needs a lot of extension energy and it can be cut, intralooping is more suitable than interlacing in sewing of wool. In interlacing using polyester, extension and shearing resistance are high. Therefore, it is suitable for knit sewing with high massing. Silk is not suitable for interlacing since it can be rut. Even though knit materials are different, the RT values of polyester and cotton are similar in same construction. Therefore, they can be substituted each other considering resilience after sewing.

• 복식문화연구
• /
• 제26권4호
• /
• pp.503-518
• /
• 2018

The purpose of this study is to illustrate the design of safety suits based on energy-harvesting technology, particularly targeting street cleaners who must work at night with high mobility. The design focuses on applying lightweight energy-harvesting tools and illuminant into the wear. The design development reflects feedback from testers collected via survey constituting a key methodology. The development process has two main stages. Each stage uses a process of design prototyping, internal examination, test sampling, test wearing, and wearers' feedback via survey that consists of questions on visibility, wearing convenience, and washability. The first stage results show the design of safety suits with energy-harvested LED illuminant inserted and the survey results collected from street cleaners dressed in 4 sample and 80 actual suits in total. Improved based on the first-stage survey results, the second stage designs the suits with detachable energy-harvested EL tape. From these 5 sample and 30 actual second-stage suits, the additional survey indicates that this second-stage design facilitates more visibility and convenience in washing and wearing than the first-stage design. Accordingly, one can expect that this new design can apply not only to safety suits for night workers but also to handicapped or outdoor sportswear applications in the future.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1092-1101
• /
• 2005

The purpose of this study is to analyze the size of ready-made clothing for elderly women and to evaluate their fit according to body type. Subjects were 33 women aged 60 and older, and they were classified by stature and drop index. The size of clothing which manufactured by four apparel brands were measured and compared with body size, and the size designation of four brands was compared. The questionnaire was carried out to subjects, and the size recognition and dissatisfaction with ready-made clothing were analyzed. The fitting test were carried out, and the subjects evaluated the fit of jackets and slacks of four brands. In the result of questionnaire, we found that subjects had little recognition about their clothing size. Subjects responded that they often felt dissatisfaction in their jacket length, sleeve length, shoulder width, bust girth, slacks, and waist girth. We found that each apparel brands had different sizing system and that even if the size designation of label was same, the clothing size was quite different. So the elderly women who didn't have so much knowledge about their own clothing size had a tendency to confuse with choosing proper clothing for themselves. In the wearer's evaluation, the significant difference in the degree of unsatisfaction were certified in several body parts according to wearer's body type. Especially, the degree of unsatisfaction in the case of subjects of having very small stature or very small hip was higher than other body types. From the result, we certified that it was necessary to consider the characteristics of each body type to increase the satisfaction of elderly women with clothing.

• 패션비즈니스
• /
• 제3권4호
• /
• pp.131-138
• /
• 1999

The purpose of this study is to measure Korean, Chinese and Chosunjok college women's body part sizes, and then, classify their body shapes according to the drop value(hip circumference-chest circumference) as well as their statures, and thereupon, comparatively analyze the statistical distribution of their major body part measurements and thereby, provide for some basic data useful to the development of quality fitting apparels exportable to China. The results of this study can be summarized as follows; Most of Korean and Chinese college women were found to belong to the body type of "N" body shape, while many of Chosunjok college women belonged to "H" body shape body type characterized by normal stature but small difference between hip and chest circumferences. The most prevailing body type of Korean and Chinese college women next to "N" type(65%, 51%) was "H" (23%, 35%), followed by "A" type(12%, 14%), while that of Chosunjok college women was "H" type (54%), followed by "N" (40%) and "A" type (6%). On the other hand, in terms of distribution of major body part sizes, there was found a wide difference between Chinese and Korean college women. Chosunjok college women had similar body part sizes to Korean college women's in such measurements as waist back length, shoulder-to-shoulder length, front interscye length, back interscye length, under-chest circumference and weight, while having simliar body part sizes to Chinese college women's in such measures as stature, arm length, waist front length, waist side-hip line length, crotch length, head circumference, neck-root circumference and waist circumference.