• Geophysics and Geophysical Exploration
• /
• v.12 no.2
• /
• pp.208-214
• /
• 2009

Using the GNSS data and tilt-meter data of Boeun (BOEN) and Goesan (GSAN) GNSS stations, we have calculated the differential distance vector variation with the calculation time span set to 1 hour and 3 hour and differential tilt vector variation along time and derived an indicator of similarity between the two variations along time. The similarity such calculated is rather lower than high. But as the existence of a circular type movement of the antenna's phase center's location due to the tilt's variation of the antenna tower because of the sunlight's diurnal change is certain, we recommend to take such diurnal variation of antenna's location into consideration when the correction error in DGNSS or the measured data at reference stations in VRS (Virtual Reference System) is broadcast.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.60-65
• /
• 2020

The monopulse tracking algorithm can estimate the location of a partner station based on an RF (Radio Frequency) signal. The location of the partner station is estimated based on the monopulse ratio curve (MR-C), which is calculated based on the sum and difference signal patterns of an antenna. Therefore, the range in which the estimated location can be calculated with high accuracy increases in proportion to the linear region of MR-C. In this paper, we proposed a method to extend the linear region of the MR-C curve using the beamforming technique for the tracking antenna system using the active phased array antenna. Simulation results based on the same antenna system, it was confirmed that the linear region of MR-C was enlarged by about twice as much as the general case where the proposed method was not applied.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1039-1046
• /
• 2016

To study a habit and life patten of a wild animal, this paper do a research on the location tracing system of wild animal by yagi-antenna low pass filter, angle tracking technology. Commonly, VHF Radio Telemetry is used for the location tracing system of wild animal. Considering movement, Previous yagi-antenna has 4-element and has advantage of portability but the other advantages are small and preference is weak. To make the advantage of yagi-antenna higher than previous one, Supposed technology adapt to 6-element and make out Narrow space yagi-antenna technology. Also, It supposes that AOA (:Angle of arrival) technology is applied to detecting technology for a close direction from received signal. Based on this study suggest that position tracing technology is so as to figure out a life patten and habit of a wild animal which live in a certain area.

• Proceedings of the IEEK Conference
• /
• 2007.07a
• /
• pp.33-34
• /
• 2007

LBS has many issues of wireless sensor networks and mobile communication parts. Location tracking or location sensing will be the opening of ubiquitous society's a big challenge and the beginning of infinite ubiquitous society's a chance. The purpose of this paper is study of sensing rate per reader antenna's placement and tag location and placement using RFID as location reference point with many advantages for location detection.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.42 no.4
• /
• pp.63-68
• /
• 2005

In this paper, the single coaxial fed and circularly polarized patch antenna for the RFID system in 2.45GHz ISM band has been fabricated. The simulation by HFSS, electro-magnetic field simulator was executed in order to decide the location of feed which is difficult to be analysed. The simulated result has the same tendency as the measured one in the view of input impedance with the variation of feed location. VSWR of fabricated antenna is low($\leq$1.2) even in comparatively high dielectric loss epoxy substrate(FR4), and this value is enough for the application of RFID reader antenna.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.648-650
• /
• 2015

In this research, we investigate an influence of a reader antenna location in Passive UHF RFID system based Object localization. When the localization system uses stationary RFID reader system, the performances of the system are significantly varied depending on the deployed antenna conditions due to its external environment such as reflection by the ground and obstacles. In this research we deeply study the RF conditions and differentiation with various antenna location. According to the empirical results, the localization system shows the best performance, where the reader antenna locates 1.5m from the target area of interest.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.909-914
• /
• 2012

The paper introduces the RFID location based Tree Management System (TMS) using UHF RFID tag and GPS. The bolt shape tag has been developed since the wood material has high dielectric constant. Since the characteristics and impedance of tag antenna can be changed by the material next to the tag, the plastic bolt shape tag antenna has to be carefully designed with consideration of the high dielectric constant of the wood material. The RFID TMS system has been utilized with the bolt shape tag antenna and GPS. The TMS system uses and links Google map to locate the location of the trees. Therefore, this system allow us to manage the trees economically and efficiently.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.7 no.4 s.19
• /
• pp.20-25
• /
• 2004

The existing antenna that equipped with Micro Aerial Vehicle, microstrip antenna only can send and receive image signal because of limited bandwidth. But, proposed antenna that equipped with Micro Aerial Vehicle flight introduces tapered type patch antenna, also improves bandwidth then can transfer present location, altitude, movement speed. Furthermore, as a result of introduce stacked type, it transfers more quality of image signal, and represents most suitable performance in Korean peninsula that has many mountain peaks. In this paper, to transmit and receive the wideband signals with a antenna system, the wideband microstrip antenna is proposed and designed. This antenna operates at 2.4GHz. In this thesis, the resonance frequency of 2.4GHz and the reflective loss of the antenna of -22dB were calculated by measuring the fabricated Tapered Microstrip Patch Antenna which was designed with the resonance of 2.4GHz. The calculated gain and efficiency of antenna were 6.7dB and $60\%$ respectively. The characteristic of the bandwidth shows with $50\~60MHz$ which is $6.02\%$ at the basis of -l5dB reflective loss. The experimental results can be used in the characteristic of the resonators and this antenna produces a greatly enhanced bandwidth.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.535-540
• /
• 2004

In this paper, We proposed a rectangular slot antenna with CPW feeder. Slot antennas fed by CPW are attractive due to the simple fabrication simplicity and ease of integration with active devices. This antenna consists of two parts, inner patch and outer patch to realize wide-band antenna by multi-frequency. Also, We fabricated a proposed rectangular slot antenna, confirm characteristics of multi-frequency by tuning antenna parameters, inner antenna's location and size. The experimental results show that each resonant frequency of a fabricated antenna is measured at almost 1, 9GHz, 2.8GHz, 3, 5GHz, 4, 9GHz. In radiation patterns each resonant frequency, radiation pattern 4-th resonant frequency is the same ad that of TM11 in patch antenna. Therefore, the experimental and theoretical results shows that a proposal rectangular slot antenna have triple resonant frequencies.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1937-1942
• /
• 2016

Unlike oil immersed transformers, cast-resin transformers have the solid insulator 'epoxy resin' in sealed structure. Therefore, they reveal a lot of limitations in checking aging conditions and predicting an accident. This study analyzed the characteristics of Cast-resin transformers by the measurement distance and measurement sensitivity with a corona defect sample, using antenna sensor. Therefore, the experiment has proven that the antenna sensor-based measurement method proposed in this study is able to detect the insulation defect location of the cast-resin transformer, unlike conventional measurement methods. It is expected that the result of this study will be used to develop a new type of measuring method in order to measure insulation defects and to use in safety inspection of domestic cast-resin transformers.