• 복합신소재구조학회 논문집
• /
• 제5권4호
• /
• pp.11-17
• /
• 2014

A progressive failure analysis procedure for composite laminates is completed in here. An anisotropic plastic constitutive model for fiber-reinforced composite material is implemented into computer program for a predictive analysis procedure of composite laminates. Also, in order to describe material behavior beyond the initial yield, the anisotropic work-hardening model and subsequent yield surface are implemented into a computer code, which is Predictive Analysis for Composite Structures (PACS). The accuracy and efficiency of the anisotropic plastic constitutive model and the computer program PACS are verified by solving a number of various fiber-reinforced composite laminates with and without geometric discontinuity. The comparisons of the numerical results to the experimental and other numerical results available in the literature indicate the validity and efficiency of the developed model.

• 대한기계학회논문집
• /
• 제18권4호
• /
• pp.887-902
• /
• 1994

Within the framework of anisotropic thermoelasticity, the problem of an interlaminar crack in a laminated fiber-reinforced composite subjected to a uniform heat flow is investigated. Under a state of generalized plane deformation, dissimilar anisotropic half-spaces with different fiber orientations are considered to be bound together by a matrix interlayer containing the crack. The interlayer models the matrix-rich interlaminar region of the fibrous composite laminate. Based on the flexibility/stiffness matrix approach, formulation of the current crack problem results in having to solve two sets of singular integral equations for temperature and thermal stress analyses. Numerical results are obtained, illustrating the parametric effects of laminate stacking sequence, relative crack size, crack location, crack surface partial insulation, and fiber volume fraction on the values of mixed mode thermal stress intensity factors.

• EDISON SW 활용 경진대회 논문집
• /
• 제4회(2015년)
• /
• pp.285-291
• /
• 2015

In this paper, a composite material analysis program based on the finite element method(FEM) is used. The purpose of this study was to verify whether the composite material analysis program which developed as part of a project of development of softwares and educational contents for structural vibration and composite material analysis that can calculate how similar the macroscopic mechanical behavior of the composite materials actually. Because composite materials are generally anisotropic, analysis of composite laminate is used for the constitutive equations of orthotropic material. For convenience, the unit is ommited in all calculations. To verify the accuracy of the finite element method based program, the deflection and stress distribution of the simply supported composite material laminated plate subjected to a uniform load distribution is compared with exact solution. Size and properties of the composite material laminate used for analysis are fixed variables, and by changing the number of elements and the total thickness of the laminate is compared with the exact solution to the resulting value, respectively.

• 복합신소재구조학회 논문집
• /
• 제5권4호
• /
• pp.1-10
• /
• 2014

A progressive failure analysis procedure for composite laminates is developed in here and in the companion paper. An anisotropic plastic constitutive model for fiber-reinforced composite material, is developed, which is simple and efficient to be implemented into computer program for a predictive analysis procedure of composites. In current development of the constitutive model, an incremental elastic-plastic constitutive model is adopted to represent progressively the nonlinear material behavior of composite materials until a material failure is predicted. An anisotropic initial yield criterion is established that includes the effects of different yield strengths in each material direction, and between tension and compression. Anisotropic work-hardening model and subsequent yield surface are developed to describe material behavior beyond the initial yield under the general loading condition. The current model is implemented into a computer code, which is Predictive Analysis for Composite Structures (PACS), and is presented in the companion paper. The accuracy and efficiency of the anisotropic plastic constitutive model are verified by solving a number of various fiber-reinforced composite laminates with and without geometric discontinuity. The comparisons of the numerical results to the experimental and other numerical results available in the literature indicate the validity and efficiency of the developed model.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 추계학술발표대회 논문집
• /
• pp.234-238
• /
• 1999

This study suggests the design of the functionally gradient composite, [0/90/0/core]$_s$ cross-ply laminate, to prevent stress concentration induced from the difference of rigidity between the bone and the artificial hip joint and to reinforce the wear property of the surface and the expectation of their mechanical properties. First, the four-point bending test is done about wet bones and dry bones to know the mechanical properties of the cortical bones. In result, the wet bone shows the viscoelastic behavior and the dry bone shows the elastic behavior. Moreover, we expect the properties of the proposed gradient composites as a function of carbon fiber volume fraction in each layer to apply Halpin-Tsai equation, CLPT(classical laminate plate theory), and Bernoulli beam theory etc. and decide the thickness ratio of each lamina in order to match Young's modulus of the anisotropic cortical bone with the proposed gradient composites.

• 한국산업융합학회 논문집
• /
• 제22권3호
• /
• pp.273-280
• /
• 2019

Carbon fiber composite laminate has been widely used in the area of sports applications such as race car, golf club, fishing rods, yacht. In this study, carbon fiber composite laminate was used in the rear upright of leisure purposed small size single-seat electric race car to reduce its unsprung mass of suspension system. The focus of this research is to investigate in finding optimal stacking lay-up of rear upright laminated with carbon fiber composite in the early design phase. Forces transferred from circuit road to rear upright were estimated through MBD(Multi-Body Dynamics)model of the rear suspension geometry. To evaluate the strength of the rear upright laminated with carbon fiber composite which generally behaves in an anisotropic or orthotropic manner, FEA(Finite Element Analysis) model suitable for composite materials was built followed by its strength was evaluated depending on different stacking lay-up. The result showed that Symmetric stacking lay-up [$45^{\circ}/-45^{\circ}/90^{\circ}/0^{\circ}$]s for frontal area and symmetric stacking lay-up with 1mm aluminum core [$45^{\circ}/-45^{\circ}/90^{\circ}/Core$]s for rear area were most suitable of 16 lay-up cases from the side of both strength based on Tasi-wu failure index and weight.

• Structural Engineering and Mechanics
• /
• 제22권5호
• /
• pp.599-611
• /
• 2006

The theory with hierarchical warping functions had been used to analyze composite thin-walled structure, laminated beam and had good results. In the present paper, a series of hierarchical warping functions are developed to analyze the cylindrical bending problems of composite lamina. These warping functions which refine through-the-thickness variation of displacements were composed of basic and corrective functions by taking into account of anisotropic, material discontinues, and transverse shear and normal strain. Then the hierarchical finite element method was used to form a numerical algorithm. The distribution of the displacements, in-plane stresses, transverse shear stresses and transverse normal stress for composite laminate were analyzed with the present model. The results show that the present model has precise mechanical response compared with the first deformation transverse theory and the corrective order affects the accuracy of result.

• 한국강구조학회 논문집
• /
• 제11권2호통권39호
• /
• pp.117-129
• /
• 1999

본 연구의 목적은 복합재료의 이점을 증명하고, 비등방성 대칭 적층 원통형 쉘의 거동을 분석하는 것으로서, 비등방성 대칭 적층 원통형 쉘을 해석하기 위해서 전진차분법, 중앙차분법, 후진차분법으로 구성되어 있는 유한차분법을 적용하였다. 본 연구에서는 처짐과 모멘트를 자유도로 고려하였으며, 이는 모멘트 계산시 발생할 수 있는 오차를 줄일 수 있는 장점을 가지고 있다. 또한 4변이 모두 단순지지된 경계조건을 고려하였다. 수치해석 결과, 유한차분법에 의한 본 연구의 프로그램이 비등방성 대칭 적층 원통형 쉘의 해석에 적합함을 알 수 있으며, 효과적인 보강섬유의 배치 방법을 제시하였다.

• 비파괴검사학회지
• /
• 제23권3호
• /
• pp.237-245
• /
• 2003

이방성 복합재료 적층판에서는 섬유의 배열방향에 따라 탄성계수가 변하므로 속도가 섬유의 방향성에 의존하게 된다. 등방성 속도를 기준으로 도달 시간차를 측정하는 전통적인 2차원 음향방출 위치표정 방법을 그대로 적용할 경우 위치표정의 오차가 매우 커지며, 그 과정이 복잡해지는 것을 피할 수 없다. 본 연구에서는 위치표정의 대상이 되는 관심영역(ROI)를 마치 유한요소법에서 사용하는 메쉬(mesh)처럼 적절한 크기의 정사각형 요소로 나눈 뒤, 각각을 가상의 AE 발생원으로 간주하였으며, 모든 요소에 대해 이방성을 고려한 속도를 기준으로 각 센서와의 도달시간차를 구하였다. 실험적인 검증을 위하여 알루미늄 박판 및 복합재료 적층판에 대해 $0^{\circ}$ 부터 $90^{\circ}$까지의 속도를 측정하고 위치표정을 실시함으로써 이방성 적층복합재로 이루어진 실제 구조물에서의 실시간 활용가능성을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제25권6호
• /
• pp.637-652
• /
• 2007

This paper presents stacking sequence optimization of laminated angle-ply cylindrical panel based on natural frequency. Finite element method (FEM) is used to obtain the vibration characteristic of an anisotropic panel using the first order shear deformation theory(FSDT) and genetic algorithm (GA) is used to obtain the optimal stacking sequence of the layers. Cylindrical panel has finite length and arbitrary boundary conditions. The thicknesses of the layers are assumed constant and their angles are specified as design variables. The effect of the number of plies and boundary conditions in the fitness function is considered. Numerical examples are presented for four, six and eight layered anisotropic cylindrical panels.