• 한국운동역학회지
• /
• 제19권4호
• /
• pp.707-717
• /
• 2009

본 연구의 목적은 여자 창던지기 선수를 대상으로 지지발 착지와 릴리즈 국면 시 우수 집단과 준우수 집단 간의 운동학적 차이를 규명하는데 있다. 이를 위해 국내 여자선수 8명을 대상으로 측정 최고기록이 45m이상인 선수를 우수 집단으로, 45m이하를 준우수 집단으로 구분하였다. 창의 투사속도에 있어서 릴리즈 단계의 수직속도는 집단 간에 통계적인 차이를 보이지 않았지만, 수평속도는 집단 간에 유의한 차이(p<05)가 있는 것으로 나타났고, 릴리즈 순간의 투사각에 있어서 우수 집단은 평균 36.3도를 보였고, 준우수 집단은 평균 42.3도를 보이면서 집단 간에 유의한 차이(p<.05)가 있는 것으로 나타났다. 지지다리 무릎각에 있어서는 힘 발 착지(우수>준우수)와 지지발 착지(우수<준우수) 그리고 완전착지(우수<준우수)에서 집단 간에 유의한 차이(p<.05)가 있는 것으로 나타났지만, 릴리즈 순간에 있어서는 유의한 차이를 보이지 않았다. 어깨각에 있어서도 힘 발 착지에서만 유의한 차이(p<.05)를 보였고, 릴리즈 단계에 있어서는 유의한 차이를 보이지 않았다.

• 대한정형도수물리치료학회지
• /
• 제9권1호
• /
• pp.19-28
• /
• 2003

Objectives : This study was to investigate the relationship analysis in VDT(visual display terminal) of work hours. Methods : Questionnaires were completed by 41 women in VDT operations. The information was used to estimate multiple regression for the VDT of work hours related factors association. Results : The prevalence of the VDT of work hours was significantly higher in the shoulder which followed by the neck, the hand and fingers, the arms, the lowback, the back. The VDT of work hours decreased with aging. The VDT of work hours increased with work duration, single, lower among habitual exercise. The desk height, the seat pan height, the posture on the sitting, the elbow angle all did not meet the recommended criteria. Conclusions : Data from this study support a statistically significant association with satisfaction for occupation.

• 한국운동역학회지
• /
• 제15권3호
• /
• pp.161-173
• /
• 2005

Recently among several tennis techniques forehand stroke has been greatly changed in the aspect of spin, grip and stance. The most fundamental factor among the three factors is the stance which consists of open, square and closed stance. The purpose of this study was to investigate the relations between the segments of the body, the three dimensional anatomical angle according to open stance patterns during forehand stroke in tennis. For the movement analysis three dimensional cinematographical method(APAS) was used and for the calculation of the kinematic variables a self developed program was used with the LabVlEW 6.1 graphical programming(Johnson, 1999) program. By using Eular's equations the three dimensional anatomical Cardan angles of the joint and racket head angle were defined 1. In three dimensional maximum linear velocity of racket head the X axis showed $11.41{\pm}5.27m/s$ at impact, not the Y axis(horizontal direction) and the z axis(vertical direction) maximum linear velocity of racket head did not show at impact but after impact this will resulted influence upon hitting ball It could be suggest that Y axis velocity of racket head influence on ball direction and z axis velocity influence on ball spin after impact. the stance distance between right foot and left foot was mean $74.2{\pm}11.2m$. 2. The three dimensional anatomical angular displacement of shoulder joint showed most important role in forehand stroke. and is followed by wrist joints, in addition the movement of elbow joints showed least to the stroke. The three dimensional anatomical angular displacement of racket increased flexion/abduction angle until the impact. after impact, The angular displacement of racket changed motion direction as extension/adduction. 3. The three dimensional anatomical angular displacement of trunk in flexion-extension showed extension all around the forehand stroke. The angular displacement of trunk in adduction-abduction showed abduction at the backswing top and adduction around impact. while there is no significant internal-external rotation 4. The three dimensional anatomical angular displacement of hip joint and knee joint increased extension angle after minimum of knee joint angle in the forehand stroke, The three dimensional anatomical angular displacement of ankle joint showed plantar flexion, internal rotation and eversion in forehand stroke. it could be suggest that the plantar pressure of open stance during forehand stroke would be distributed more largely to the fore foot. and lateral side.

• 산업기술연구
• /
• 제21권B호
• /
• pp.265-272
• /
• 2001

The human arm is modeled by three rigid bodies(the upper arm, the forearm and the hand)with seven degree of freedom(three in the shoulder, two in the elbow and two in the wrist). The objective of this work is to present a method to determine the three-dimensional kinematics of the human elbow joint using a magnetic tracking device. Euler angle were used to determine the elbow flexion-extension, and the pronation-supination. The elbow motion for the various driving conditions is measured through the driving test using a simulator. Discomfort levels of elbow joint motions were obtained as discomfort functions, which were based on subjects' perceived discomfort level estimated by magnitude estimation. The results showed that the discomfort posture of elbow joint motions occurred in the driving motion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2053-2058
• /
• 2008

Extruded aluminium panels have been widely used for railway vehicle structures because of their light specific weight and other merit. In the past, GMAW (Gas Metal Arc Welding) and GTAW (Gas Tungsten Arc Welding) were mainly used to join aluminium panels. But recently friction stir welding (FSW) is widely used. due to its lots of advantage. In this study aluminium A6005-T6 which are used for car body structures was chosen. The influence of main parameters such as : pin rotating speed, welding speed, shoulder diameter, pin length and tilting angle on mechanical properties was examined. Optical microscope observation, micro hardness test and tensile test were carried out. Tensile strength of the stir welded plates is 74% of that of the base material.

• 대한가정학회지
• /
• 제43권9호
• /
• pp.175-191
• /
• 2005

This paper proposed a sizig system for men's jackets in order to improve the clothing fitness and rain the productivity. The sizing system was classified according to 3 age groups. Figure types were categorized by shoulder angle and body shape. The size interval of the basic dimensions was established at regular intervals centering around their means. Altogether, 15 size charts were developed based on the frequency distribution. Size designating measurements for jackets were height, chest girth and waist girth. Size intervals were 3cm for chest and waist girth, 5m for height, and 2cm for waist and hip girth. Considering the cover factor, charts with a limited number of sizes were suggested with necessary measurements for each figure type of each age group.

• 복식
• /
• 제66권5호
• /
• pp.66-81
• /
• 2016

This study is designed to understand the problems of existing Korean male soldiers' winter uniform tops by researching its current state, and contribute to developing uniforms with improved size and motion appropriateness. Military bases were visited to research satisfaction of size and motion appropriateness of the current winter uniform tops. 193 soldiers were surveyed and interviewed, and the shape and fit of the standard sizes of the inner and outer layers of the current winter uniform were analyzed. Findings of this study are as follows. 1) Compared to the new combat uniforms that soldiers were wearing in their appropriate size (of the 44 sizes), there were many cases where the soldiers were not wearing winter uniform inner (of the 8 sizes) or outer (of the 18 sizes) layers in the correct size for their body. 2) A total of 37 combat uniform sizes appropriate for the body shapes were expected to be newly applied, and inside and outside layers of winter tops would be presented as sets of 14 different sizes in step with the new combat uniform sizes, instead of the existing 8 inside layer sizes and 18 outside layer sizes. 3) The inner and outer layer of the existing winter uniform tops had several problems with the shape and fit. First, the inner layer was shorter than the combat uniform. Its shoulder width was wide, but the sleeve length was short creating lack of coverage, and the angle connecting the sleeve and bodice was very small creating a high sleeve cap curve and narrow sleeve width that make motions difficult and cause discomfort. As for the outer layer, the hem moved up when soldiers bent over or adjusted the waist string so the top could not sufficiently cover, the shoulder width was wide and the sleeve length was short, requiring improvements.

• 한국의류산업학회지
• /
• 제20권4호
• /
• pp.429-438
• /
• 2018

This study analyzed the fit-zone of the neck for females in their 60s. We considered the standard body types of females in their 60s and the four body types from the sixth Size Korea. The results of the study were as follows. We could not determine a pattern formula for the neck based on the changes in the body type of females in their 60s. However, the position of the lateral neck point generally showed a significant difference from that of females in their 20s. In the case of the shoulder angle, the point of the shoulder was angled slightly towards the back in all body types. It was also found that the curve of the neck circumference for both the collar and the bodice should have been smoother than what was shown on the 3D shape. The larger the height difference between the point of the back of the neck and the lateral neck point in the 3D shape, the smoother the design should be at the curve of the circumference at the front of the neck. A larger curvature in the front radius of the 3D shape increased the difference in the shape of the curve between the collar and the basic pattern of the bodice. Hence, a more careful design is required for these parts of the pattern. In addition, the more the front neck is bent, the smoother the circumference curve should be in the pattern design at the front of the neck and the collar.

• Clinics in Shoulder and Elbow
• /
• 제17권1호
• /
• pp.18-24
• /
• 2014

Background: To evaluate the efficacy of the subclavian portal approach for the arthroscopic repair of isolated subscapularis tendon tear. Methods: We used the subclavian portal to carry out arthroscopic repair of the isolated subscapularis tendon tear. The surgery was carried out in 18 cases (average age of 53) from May 2006 to December 2009 with a mean follow-up period of 35 months. Of these cases, 13 patients had the tear in their dominant arms, 16 were male, and 12 were from traumatic ruptures with on average 7.6 months of symptom period to operation. Additional surgery, acromioplasty and subacromial debridement, were carried out on 4 cases each during the subscapularis repair. The integrity of cuff status was assessed by ultrasonographic examination at 6 months and at 1 year after operation. Results: The initial average range of motion in forward flexion, external rotation, and internal rotation were $160^{\circ}$, $50^{\circ}$ and L4, respectively. At the 1 year follow-up period, these improved to $160^{\circ}$, $52^{\circ}$ and T12, respectively. The initial average functional scores were assessed by KSS, ASES, UCLA, and Constant scoring systems, which were 67, 60, 26, and 65, respectively. These scores improved progressively with time. At 3 months after operation, the scores were 74, 67, 27, and 74; at 6 months, 83, 77, 31, and 75; at 1 year, 88, 86, 32, and 79; and at the final follow-up of 35 months, 84, 92, 34, and 84. Conclusions: In the repair of isolated subscapularis tendon tear, the subclavian portal approach provided a good angle for anchor insertion and sufficient space to manage the upper portion of the tendon tear. In turn, these provisions resulted in satisfactory clinical results.

• Clinics in Shoulder and Elbow
• /
• 제24권4호
• /
• pp.253-260
• /
• 2021

Background: To suggest a reasonable isometric point based on the anatomical consistency of interosseous membrane (IOM) attachment in association with topographic characteristics of the interosseous crests, the footprints of the central band (CB) of the IOM on the radial and ulnar interosseous crests (RIC and UIC) were measured. Methods: We measured the distance from the CB footprints from each apex of both interosseous crests in 14 cadavers and the angles between the forearm axis of rotation (AOR) and the distal slopes of the RIC and UIC in 33 volunteers. Results: The CB footprints lay on the downslope of both interosseous crests with its upper margin on average 3-mm proximal from the RIC's apex consistently in the radial length, showing normality (p>0.05), and on average 16-mm distal from the UIC's apex on the ulna without satisfying normality (p<0.05). The average angle between the UIC's distal slope and the AOR was 1.3°, and the RIC's distal slope to the AOR was 14.0°, satisfying the normality tests (p>0.05), and there was no side-to-side difference in both forearms (p<0.05). Conclusions: The CB attached to the downslope just distal to the RIC's apex constrains the radius to the UIC that coincides with the AOR of the forearm circumduction, maintaining itself both isometrically and isotonically.